วีดีโอ

Fault finding and some confusing red herring readings of a pair of faulty dual diodes that make up the high and low side of a bridge rectifier in the power supply. I replaced them with 2 pairs of 1n4001 diodes and a few new fuses.

Modules: 2 Thomas Henry 4046 VCO's. 3 YuSunth VCLFO's A CEM3320 Resonant LowPass Filter. A PT2399 delay/echo. Into a Thomas Henry Phase Shifter. Cheap Reverb from the desk. Recorded that patch into Ableton then added drums, bass and strings using VSTs. Vocal samples are from a movie.

Replacing a faulty cable.

Spontaneous recording from a mouse jam on Ableton. Original Music and Video by Nordl3.

Fixing a button and an LED with signs of liquid damage on the PCB. The damage was causing preset 2 to be unable to be selected. I tried replacing the 74hc165 and the resistor network and giving it a good scrub with isopropyl solution and a toothbrush but no luck. It was an intermittent fault and tricky to pin down. I was reluctant to replace the delicate button as it seemed to work, but I had a...

A simple fix and tidy up.

Original Music and Video by Nordl3.

Back in June 2019. Here I was testing out the 10 channel MFOS-inspired Stereo mixer which I still use to mix my modular drums.... Another huge Synth DIY project but fairly straightforward circuit... All PCBs laid out in Fritzing and cut on my home CNC along with the custom case, PSU and front panel etc. Fun Fact: I made a blooper on the panel PCB! I put ALL the pots on upside down and as luck w...

Shots from a day out at a hillfort atop the 244 metres (801 ft) high Grianan Mountain at Inishowen in County Donegal, Ireland. The main structure is a stone ringfort, thought to have been built by the Northern Uí Néill, in the sixth or seventh century CE;[2] although there is evidence that the site had been in use before the fort was built. It has been identified as the seat of the Kingdom of A...

An old video from Feb 2022 where I was testing some distortion ideas and running it into a LPF (CEM3320) This was part of R&D for the "Stereo AM Drive Filter" That was a huge and difficult project. I really should make a video demonstrating the finished product... Watch this spacer...

Original Music and Video by Nordl3. Fun Fact: The rotating head is a 3d model of my own head. LOL

Made back in December 2022, this video shows one of the L/R channels being tested on the motherboard. I will soon make a video of the finished product which was completed not long after this video was made. The signal first goes through a 2164 VCA into DG413 analog switch into either a RAT core distortion, or bypasses it, where it then goes into another DG413 analog switch which can bypass the ...

Original Music and Video by Nordl3.

Derrière les lignes

Sequence 03 (Derry Winter Sunrise)

Dual VCO CEM 3340 Bread boarded

Sequence 02 (NoodleBreadXrayToast)

Addressable RGB LED Lights Sequence

Omnitronic TRM-402 Rotary Mixer Repair Tear down

Denon DJ Prime Go Repair Tear Down

Arduino Teensy Groovebox 8 Encoders OLED screen Part 6

Arduino Teensy Groovebox 8 Encoders OLED screen Part 5

Arduino Teensy Groovebox 8 Encoders OLED screen Part 4

Arduino Teensy Groovebox 8 Encoders OLED screen Part 3

Arduino Teensy Groovebox 8 Encoders OLED screen Part 2

Une voir de Derrière

Arduino Teensy Groovebox 8 Encoders OLED screen Part 1

MIDI 8 Sequencer Update

Ramp Core VCO with Baby 8 Sequencer