วีดีโอ

I heard you dynoed the first X pipe ever but I don’t believe a word of it

“Something else I wanted to do today” 😂 all of us

This just happened to my 93 z28 where can I get a replacement for it? From wat year should I get it from ?

Didn't shoe how you took the button off. Sorta skipped it. Will it break if I pry it off with a screw driver?

👍🏾 nice vid

What is the issue here and why does this work?

What is this product called?

Thanks. Your help was awesome 👌

Thanks for the tip. I was getting crackling sounds from the dashboard when I hit 50 mph or <. Saw you video and tore off the rubber trim from bottom of windshield (cosmetic only) and no more crackling.

holy shit, I cant believe what I just watched. I am always seriously amazed at the wonderful things people do to their vehicles or someone else's vehicle. So let me get this straight you spent at least 30 minutes drilling through the cars inner body/ frame in lieu of removing the air box which would allow access to the part without damaging the car, and only takes 5 minutes. peace and love my friend

I was having the same issue, had no idea what CRC cleaner was but figured I'd try taking the cover off and blowing air in there...... didn't wanna hook up the aircompresser so I just blew air with my mouth and by dang it worked! Lol I am so grateful for this hack, my van died last night and so I have to drive my husband's work car for a few days and the seat is all the way back for his height and would not move forward for my short self. So grateful!!

Who else jerked off to him taking that motor out?

Could this be why my Ford Escape doesn’t blow cold air at hwy speeds?

It's definitely no brain science.The ones without no brains are just a rectifier and transformer and a gauge in the sbitch.Put on low settit, should bring the battery up.But don't let it sit in charge too long unless the battery is still not above charge but they'll let it overcharge

If you’re gonna make a video showing how to do something show how to do it don’t just cut to the parts where you’ve already done it

I know it’s been 5 years but did you happen to check engine oil level and remember what it was?

Thank you Sir!

more fun, on the sky 2.0, its between the motor and the firewall! how much cooling goes on back there?!?

Stupid video

I have one question, What does the rubber trim actually do since you did not use it? T-top and hard top use the same rubber seal, and I hear vert uses a different seal. so is that seal really necessary?

Use compressed air to clean and unclog the tube drain to avoid flood and interior water spill.

What to do when no codes but Will not rev above 2200 revs

Those were some tit tight nuts

Dude, you shouldn't be making vehicle repair videos.

Thank you so much

Hope this is where the mouse is in mine. It smells horrid. Thank you for sharing!! I'll let you know.

I just did this and you are 100% what should be simple is absolutely rediculas. Took me hours and yes black and blue. I am a big guy but wish I had small hands for this job. Okay so what worked for me. First I was able to use a 10mm box wretch just to loosen. Then I used a 10mm box ratchet wrench with a swivel head. It didn’t quite fit over the bolts but once lossened I was able to push onto the top of the bolt and ratchet the rest of the way. But as stated it is tight so I was only able to ratchet maybe 10 degrees at a time so it took a while to get it off. As I note everyone state the bolt on the bolt is the hardest but I found the one at the back the most challenging. Good news is it had the orginal orange seals at 145,000 that means next change would be 290,000 should be years from now, so for that reason I see. No sense in changing it to a more accessible location. I did use original GM seals which are now black, do not see any sense in trying to save money on a part this difficult to replace. Hope this help someone

cool Full video

Thank you for the info on the fiel pressure regulator for a GP GTP

If it was the unit it would come up on the odd computer and air is getting in the system to bleed the ABS system it can be done with the right equipment!

Now i have to find a video on how to remove the grill

Hi, great video..Is this the same method throughout the years? I have a 2010

Had that switch go bad and the only way to get her started was to tilt the s wheel to a particular position in order to start it...also on cold days it would act up also.

Thank you for the bolt sizes

If anyone wants to know a MacGyver way to get r done, loosen the tension pulley, align the belt on everything except the alternator, use a 24" piece of 3/8" non-nylon braded rope with a handle tied at each end, put the rope through the belt JUST BEHIND THE ALTERNATOR PULLEY, and use it pull/wedge the belt onto the pulley, hand crank the motor to set the belt, retighten the tensioner and she's golden.

Computers ...electronics...is something that is giving everyone a headache ...now days ..i prefer the old ones....

What's the cost average for water pump replacement

YOu really don't need to remove the center console cover completely, just lift it out of the way to get to the light bulb. It's an easy job either way.

2012 Lincoln MKX: the filters only seem to correctly fit with the convex folds facing down. My filter shows that is correct airflow, the opposite of your filter. Any input would be appreciated. Thank you :)

Plot twist the oil pressure is just so great it broke the gauge🤞🍀

Wonderful news to hear you back on project oddball. Zero oil pressure????😬😬 😬

how did you get the column to drop so low mine doesn't seem to wanna drop down like yours I removed the 2 bracket bolts and the 3 on the firewall

The sylvania type 37 bulbs work, thats what I just replaced mine with...

Just subscribed. Puddin sent me. Gotta finish Puddin video first and then check you out. 👊😮👍

Just happened to me 😂😂😂

And here I was, ready to put it on bread with peanut butter.

Glad to see they told you about the pins I’ll be doing them soon but noticed my brights are always on and the lever feels loose so I’m gonna go inside soon

Water will go through the hole you bored and now you have to worry about electrical

Leak proof your holes you drilled

😂