วีดีโอ

Mainly, I just removed the upper And lower fairing, battery and battery box it was a pain in @$$ but you can mainly get the most of the clamps just removing that

And I’d say the hardest part was not dropping the screws to the upper fairing up by the cluster

@@groundzero-979 I’ll keep my handy dandy magnet close by haha. I’ve taken the fairings off to investigate and it wasn’t too bad. Sounds like I may be able to tackle this on my own. Thank you so much for all your help! It is very much appreciated. What issues did the battery box give you? Also, was the OEM clamp difficult to get off?

@revo-fpv2180 glad I could help the battery pops right off no issues and the clamp can be popped off with a long skinny straight screwdriver you’ll see they are junk

@@groundzero-979 hey, last question.. Did replacing the clamp only fix your issue or did you have to replace the hose as well? Do you know what size hose it is? Or do I need to get it from Ducati?

im glad I could help let me know how the install goes for you

Oh yeah Like nails on a chalkboard I still wanna upgrade to a Lectron carb but this was a really good fix till then

thank you! I really try to make so everyone can see all the details

@@Sunnszfn I typically do it was the end of the day killing time on the track till close

Ok

No it’s Gas

Sure go for it!

Sure man go for it!

Go for it man!

Thanks!

yeah go for it!

Absolutely go for it!

@@groundzero-979 Thanks a lot :)

Hell yeah go for it! I watch your videos all the time!

@@groundzero-979 Thanks a lot!

Super ATV here’s the link Polaris RZR 900 Winch Mounting Plate | SuperATV www.superatv.com/polaris-rzr-900-winch-mounting-plate

Let me know if you have any other questions

That place I ride is 2600 acres it’s kinda like a big free for all lol.. dang 60 miles I hope you’re still able to get some seat time in every now and then stay safe as well my friend

4500 Lb. UTV/ATV Winch (With Wireless Remote & Synthetic Rope) | SuperATV www.superatv.com/4500-lb-utv-atv-winch Polaris RZR 900 Winch Mounting Plate | SuperATV www.superatv.com/polaris-rzr-900-winch-mounting-plate

Let me know if you have any questions

@@groundzero-979thank you so much.

@@groundzero-979thank you

I’m glade I could help let me know if you have any question’s

That’s pretty much what I had going on right before the powers and it would just be boggy and flat it was so annoying

That kit really did clean up a good bit of it there is still a little bit but no where near what it was

@@groundzero-979 thank you I just ordered the same kit

@@wyattstewart742 once you get it in let me know the out come so far it’s been mixed results

@@groundzero-979 I got the kit in today hopefully I’ll get to install it you didn’t have to mess with your air screw or anything after you installed? I’m riding in Florida

I’m 5,8

@@groundzero-979 are these too small for someone who is 6 foot

Do you plan on using it as a main bike or a play bike? They are perfect for play bikes or just non-technical trail riding but as for a main bike yeah it’s to small

@@groundzero-979 i never had a bike before so and i dont plan to ride it on track just off road

@@jostioo if you can possibly stop by a dealership and check out the Kawasaki KX 112 the seat height is a little over an inch taller and you’re getting a bigger engine, but if you have the budget, I would recommend at 6 foot tall starting with a 125

That’s great to hear I’m glade I could help

It’s a 2022 125sx but the same kit will fit your 150sx Here’s the link I got the kit from it shipped quick www.ebay.com/itm/144680231799?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=NVnBkoMXRCC&sssrc=4429486&ssuid=3z7b-0-oQv2&var=&widget_ver=artemis&media=COPY

@@groundzero-979 right on man thanks for the quick response I’m going to order it & im sure it’ll clear that bogg right away probably going to buy some vforce reeds while I’m messing around with it too.

@Rooster_2007CTSV hell yeah! let me know the out come. I was able to fix 99% of the bog on mine I’m hoping to upgrade to a lectern carb in the future

On one of these other comments I seen you said go up a size with the jet depending on the pipe, I got a fmf factory fatty with a shorty. The jd kit came in today. Also ordered the vforce v4r reeds I’m just waiting on the reeds to get here to put the jet kit in. What would you suggest for the main jet..

@Rooster_2007CTSV yeah your going to have to go up in jet size’s and probably mess with the air/fuel a little bit the needle should be whatever the paper says shim or no shim

also i have the same problem zero mid power,i mean not zero but shity, when i fully drive it its okay but when i let it stand for 3 minutes turned on and give it a throtle needs like 5 sec to come to hisghest rpm it just boging for like 3 sec

I’m not sure if it will fit the Husky on the packaging it says so 125SX 150SX an 125xc I’m not sure if it will cross over

@@Juicy_rpm that’s pretty much the same issues I was having a top was perfect bottom was good but the mid was boggy and sucked I did gain a good bit of power after re-jetting it money well spent.

At some point I’ll be switching to a lectron carb thay are just a bit pricey but I know they are worth it

As long as your carb is mukini tmx38 it’s the same

Yeah i hate the angle of it but I didn’t want to take the bowl off lol

@groundzero-979 how's the new setting doing does it still bog

It’s actually pretty good it has a tiny tiny bit when woods riding but it’s barely noticeable I happy with it

@@groundzero-979 nice because mine too is boggy since factory

Has it been re jetted? That kit was money well spent

Hell yeah! I’m really excited i haven’t rode this bike since I was 13 so definitely looking forward to Getting it finished. I’m at work at the moment but when I get home I’ll get you the paint info and also the information on the kit that trail buddy inc recommend

The paint I used was a single stage and the trail buddy one is a 3 step

This is the link trail buddy inc gave me for the paint they use vmrpaints.com And we used rival VR28 CAE315 blue/green

Out of curiosity which model do you have?

Is it fine shavings or flakes and are they gold or sliver and is there a lot on it reason I ask is you’ll always have some clutch disc material

@@groundzero-979 yeah there was quite a bit and they were kinda sharp and the bike has over 50 hrs and I don’t think the oil had been changed as frequently as it should have from the previous owner

With out actually seeing it it’s hard to tell you but if it was all fine shavings and no flake it’s more then likely clutch material. Never hurts to open it up and mic the disc’s to see where they are at or just throw new ones in

If it has 50 original hours on it I’d be interested to find out what the compression levels are, and stick a camera in the cylinder to take a peek at the jug

Oh yeah they are really adamant on having the green registry sticker or title and putting your vin and end license in their computers

@@groundzero-979 wow that’s crazy. I guess that’s what happens with a government run park. Self serving a bit.

@@FSUbk yeah it’s a bit of a hassle but ya gotta give it to them for keeping it on the up and up

I just went to snag the link and it’s no longer in stock if you’d like, I can find it from somewhere else?

Those carburetors are really nice just out of my price range right now

Your most likely having the same issue I was dealing with no matter what I tried with the stock jet kit I literally had zero mid range and was boggy as hell. low speed and power band were 100% but no mid at all. the first video clip was the first ride out the dealership sounded awful. I will also say I gained a bit of power using that jd kit your stock 150 carb settings are needle 3rd clip from the top idle jet 37.5 main jet 540 idle air screw is 2 full turns out from a light seat the jd kit recommendations aren't even any where close to these settings but I have to ask have you had the bike since day one? is the bike stock? do you have any upgrades like pipe/silencer, reeds or run larger holes in the air box cover or any engine work? run race gas? have the power valves been messed with?

So basically I bought my bike used so I bought it with a full fmf exhaust system (pipe and silencer) and people say ur supposed to rejet the carb so when I took my carb off to try to see the sputter it had a 480 main jet one step richer from stock (470) and my pilot was a stock 30 and my needle was on the 2nd from the top I moved that needle down to the third position and it ran even worse. And my bike was originally a 125 but the kid raced so he bored it to a 150 to make it faster and I have stock air box /cover and reeds. I don’t run race gas and I have no clue if the power valve was ever messed with. The only thing I haven’t check is reeds power valve and air screw. And also mine will sputter mid range and clear up at wide open throttle or al least close. Only does it when you in a lower gear when you crack the throttle.

Oh man that’s a lot going on the Settings that I listed before were straight from the manual for the stock 150. Honestly, I’ve never had this much issues with tuning a carb on all my KXs back in the day I used to only go up 2 jet sizes on the main jet and it was fine, unless I had head shaving, porting and polishing done pretty much raising the compression but I had an engine builder doing that stuff for me. if you don’t mind me asking what state you’re in so I can get an idea of your altitude I can list the JD jet settings and at least try to get you some kind of a starting point but will tell you 100% that the needles that came in at JD kit were completely tapered different than the stock ones

So I live in Connecticut so I’m not really sure what the altitude and sea level would be but does the air screw on these mukuni carbs affect performance when riding because the bike runs rich it smokes a lot when it sputters and once it clears up it’s fine. The elevation for Connecticut is 500ft or 150m

@@roccodimauro3116 the JD paper is calling for a 32.5 pilot jet the blue needle 2nd clip from the top 460 main jet would go up a size on the count of the pipe idle/air screw 1 3/4 turn from light seat I feel like that's good starting point only down side is that needle dose it ever smoke heavy all the time? do you ever see loss of oil? just wondering cause crank seals can also make the engine run lean it was just a thought

Hell yeah if you ever make it to FL let me know we’ll head out. there are so many places to go riding here

Hell yeah nice to hear the cars coming along. I definitely understand waiting till spring just got back from Maryland and it snowed the day after I got there lol. Stay safe my friend keep the car updates coming

12,000HP and was running just a little under 300MPH older video but still gold

This is very true that was my first experience with them besides the case saver all and all it’s a well made product

I haven't been there in a few months was hopping to plan an ATV group ride to hunt down all of the land marks sometime soon

I’m in!!! I’ve been trying to find the suicide hill for a couple days now. Is it in the north side?

@MasterMotoTv I was just there last weekend and did a video I’ll probably be going back in a few weeks you’re more than welcome to join along

It’s hard to explain I get lost every time I try to find it lol but I start at the where the kiddie track is and head straight back

@@groundzero-979 sounds good! I’m going this weekend. Let me know when your heading out there again

😂

Lol the up grades are coming