วีดีโอ

Thank you!!!

Thank you

Do you also need to activate the license by "platform hardware throughput level" command under config mode to make it active?

it seems after upgrade the ASA old configuration has lost

Do you know how to resolve show log warning PLATFORM-3-ELEMENT_TMPFS_WARNING: Switch 1 R0/0: smand: 2/RP/0: TMPFS value 41% above warning level 40% Currently running 17.06.04 install mode.

can this be applied to any ASA or firepower? meaning does the device have to be yours?

This apply for FP 2110?

What about copying asdm image and anyconenct client to the disk0: of ASA

Nice one

is it ok for 9300

Thanks for the help 😊

what the process for 6500 ?

Best video point to point🎉

Great video and explanation!!! .... Wondering if Is there a command to create objects, policy ACL, show routes just like ASA have ?

it doesn't have option to install image from flash firepower-1010 /firmware # download image ftp: Location of the image file http: Location of the image file https: Location of the image file scp: Location of the image file sftp: Location of the image file tftp: Location of the image file usbA: Location of the image file

Question after the upgrade when I reboot even from Asa it will go back to fxoc is there a way to keep the boot as ASA ?

I am curious about the redundancy reload shelf command at the end. Would it not be wise to force switchover to standby supervisor and then console on to the primary and reload that and confirm upgrade is successful. Then on the standby do a force switchover to the original primary and then repeat the process on the standby via console, test it works by the force switch over and then do another force switchover to back to the primary. It sounds long winded but would it not mean no downtime and if something went wrong in the upgrade you will not have any downtime since you are always running a working supervisor. Just curious is all as rebooting both primary and standby at the same time means if it goes wrong then it goes wrong for both which in a way defeats the advantages of having a primary and standby in the first place.

Brilliant Instructions! i will be trying this out on several 4507R+E switch next week and feel more confidant after watching this video, so thanks! Hopefully it will go all well. I never new about the redundancy reload shelf command, if you just typed reload i wonder what would happen even if the new IOS is on both primary and standby supervisors and both the boot system paths are correct?

Excellent, Thank you. Great Video.

Thank you, your videos are great.

Great video!!!!! Ty.

Add if this is when ASA is in Platform Mode !

still doesnt work - file corrupt somehow...

Thank you, procedure same for FTD 2100?

Hi, how can I search the c9500 switch install mode or bundle mode?

Great work ... Really the informative one ... It was very easy process. no confusions.Thanks for your time.

thank you but we don't need music

Awesome video!, thanks!

How do I mute the music?

thank you

I have C9500-48Y4C on stack.. will this work?

what should we do to uplinks and vsl links,should they be down?

Thank you so much :-)

Can I use these procedure if upgrading from Gibraltar 16-12.3a to the recommended release Amsterdam 17.3.3a?

Some of these settings are not explained well such as the #switch 1 priority 15 command. Why would a 2 stack need a priority if you manually set the switch number and what is the priority refer to? Is 15 more favorable?

I have a pair of 9500-16x at 16.9.5 I'm about to put into production, but Cisco says MR is now 16.12.4 - I would assume same process - will try this. Thanks Network Base.

thanks, that was good video. Do you have the opportunity to have a video when you do the same procedure via ASDM?

Thanks! Is it the procedure for a 9200?

Hi, do you have a guide on an FTD image? in checking/activating AES-3DES license?

Thank you! I appreciate you. Would be better if this will be in Cisco guides =)

Thanks Network Base. Used the steps outline last night for a large Hospital network. The only thing that I left out was Step: boot system flash slavebootflash:<image.bin>' When doing "Sh Bootvar" command it looked a bit wonky if you add that in. You only have to do bootflash:bootflash:<image.bin>' It will then have the correct image in bootvar for both Primary and slave. Upgrade took 10 Minutes. Also did upgrade on to 3850 which was a whole different story. Thanks for the clear concise steps made it so much easier then rummaging through all the confusing Cisco guidelines.

Thank you, i have FPR-1010 want to add ipv6 via DHCP, but it is not getting IP, any suggestions?

Thanks a ton for this. I couldn't find out to do this without involving the FMC. I appreciate silent night music too.

Very helpful n useful bro 👌🏻👍🏻

You should not configure 'boot system flash slavebootflash:<image.bin>' Because, when device bootsup, it won't understand what is slave eventhough device acting as a slave, for itself, it should search in it's own flash. So only boot system flash bootflash:<img.bin>' should suffice here

Will this work on 6880-x switch? And is rebooting takes time? If so how long? Tia

Your explanation was perfect, no errors... I recently made an upgrade to my 4500 VSS following this guide and its worked flawlessly. Thanks a lot my friend!

Very helpful

Ek no suhail

Thank you for sharing this video i found it very help full