วีดีโอ

Useful vid. They really wanted to hide how to disassemble this thing

Helped me fixing my machine. Thx!

Thanks for the disassembly overview. For reference the heating element/motor mount does come out separately. It's held by 3 small screws and a 7mm nut which holds the element and motor to the frame. Once that is removed it exposes the Plastic wheel which holds the magnets and is pressure fit to the shaft of the motor. That plastic magnet holder cracked on my unit which caused the motor shaft to spin freely as it lost the pressure fit. I super glued the plastic holder then added a drop of super glue to the shaft and pressed the assembly back into place. Allowed the proper adhesive cure time and reassembled. make sure the magnets are oriented properly, one set on mine were loose so I placed them on the magnetic whisk then slid them back into the plastic housing with a drop of glue. Working again, time will tell for how long.

Wtf

It does a good coffee but half of it ended up in the pod tray. I bought another machine so I could get my fix & decided to pull the old one down to work out why it was shagged. This is a very well built appliance, its cheap, but it is also plastic. Hence its price & perhaps some built in failure points to ensure tight fisted buggers like me have to buy a new one. The failure point on my machine was the plastic dish that pricks the pod immediately before the outlet. It sits within the outlet cover and pricks the small diameter head of the pod. Being plastic rather than metal, the pricky bits (x12) start to wear away so they are no longer pricky. This means, as in my case, only 6 of them were pricking the pod hence the leak into the empty pot dispenser. All up about tuppence halfpenny with of plastic disrupting my morning coffee.

Forget it I’ll find an oven that operates by itself

You would need a pilot’s licence to operate this oven

Omg I have this dryer where u change the cords

The very fact that you are picking it up effortlessly with one hand says everything I need to know about that product. The package it came in is more impressive.

Thanks Andrew. FYI and for other readers this might be usefull. To remove CDs stuck in a SHARP 5 CD player unit like yours (large black plastic unit) and other similar models eg Model CD-MPX860H or CD-SW300H or CDG14000 and perhaps more models using this CD player type deck take a look at this excellent video which explains the disassembly process to retrieve the CDsIt's also usefull if one wants to perhaps troubleshoot that assy ( Spanish language but easy to follow if you dont speak spanish) th-cam.com/video/CWybdFplQ50/w-d-xo.html

So what was the problem? Symptoms? Was the safety switch cutting out?

Excellent video, thanks.

Any info on the age of this appliance? I have one I think is 60yo+ and still working well.

I have a prima donna avant and cant get the top panel off, are you able to help me out? Ive removed all screws but the grind dial in the bean holder pot keeps trying to come up with the top panel as I need to access heating element

Not helpful! I want to know why the frothed isn’t spinning anymore.

Tengo uno igual pero enciende y se apaga de una vez y queda la luz roja prendida

Strange thing to want to do! I thought it was a review about it from a negative perspective, did not expect a dismantle 🤔

Cómo consigo el número de teléfono para que me oriente de la faya del equipo de sonido del técnico de la marca SHARP modelo moDelo CD.SW300

Cómo consigo el número de teléfono para que me oriente de la faya del equipo de sonido del técnico de la marca SHARP modelo moDelo CD.SW300

Sir Anu Po kaya sira Ng pioneers component ko pag I on ko Bigla Po agad namamatay

Does anyone know how much the resistance of the motor should be? From brown to black and from white to black?

I learnt a vital lesson here, and avoided a mess. Keep the whole motor upright so as not to have oil all over your work bench when removing the cylinder head (at 17.34 mins to 17.55). Do this by wrapping the motor in a big old work sheet, (Swiss roll style) enough to give it a tight fit then place it in a plastic builders (12 ltr) bucket. Now you have two hands free to work more efficiently. Do the same when replacing with new oil.

Alternative online retailers to buy replacement places at low costs online from ?

Are there brushes to replace?

How much oil?

What about the noise level. Thanks

"Teardown" is an appropriate title. You f**king wrecked it! The small "rivets" on the bottom are actually screws and the key to disassembly. If long nose pliers won't grip them, cut a slot in the head with a Dremel blade and unscrew. The rest is easy.

Where can I get a screwdriver bit to undo the bottom plate? The live wire has come out of ours. I just need a bit like you used at 10:00. Many thanks

I guess at the end of this, it all went directly to trash bin? I too have the problem of coffee not dripping to cup, but into the waste pod container. Don’t want to waste time with this crazy process. Will never buy another Espressotoria..!

I get an error 3 code at the end of my cycle. The manual says it could be a heat element. Are these easy to fix yourself? Or how do I test for it? Thanks

pathetic.

Hi, Iwas thinking of buying one of these machine's, but I noticed that Aldi don't sell the chisel's to go with it. Any idea's?????

I bought this exact model 2 weeks ago. Love it so far.

My Samson juicer it's working but cannot grind it get stuck when I put the juice vegetables like cucumber ,carrots and apple may I know whats the problem ?tq

Still happy with it?

Have seen much more helpful videos and it helps if you're using food when you demonstrate.

Hola unaa pregunta tengo uno igual a ese y la emisora no avanza solo se queden una sola , q crees q sea???

how does this perform shredding leaves ?

Proprietary fasteners SUCK BALLS. Up yours, Aldi...

Good video, mate. How are you liking it a year later?

18:09 lesson #1 don't do that! Loved that bit 👍🏻👍🏻🤣😂

Most of this is out of frame. Running it at high speed, only shows that you don't know what you're doing. Best to perform a dry run first. I don't know much about tearing down an appliance, but I do know my way around a studio.

Hi Andrew, our grinder got blocked with a small piece of metal from our coffee storage container which we removed. The top part of the grinder which sits on the cone now spins and comes loose and the beans just spin around. We get the fill beans container message. I’ve tried locking the top piece in place with different positions but it keeps moving. I’m not sure if the grinder tray needs to be removed for an adjustment which I can’t see. Any advice would be much appreciated. Thanks!

How do you get the damn handle off it for packing away in storage (please) ?????

Thanks for the effort. We ALL learned from your determination. I’m sure will be of help to similar fasteners on other products. Cost was high for you, like I said we learned from your sacrifice.

I would hate you to be my mechanic. The first thing u needed to do was use pointy nosed pliers to remove the 6 elliptical head screws (3 on either side of the base). this video should read. How to completely F....up a coffee machine (just for a laugh). I mean it is laughable!!!

Complimenti al video di merda che hai fatto

Good tunes! What/who is it?

0:21..................."care-cher''.

In the bin mate!