วีดีโอ

Thank you for the comparison. Could you please tell me the width of the end of the awkward gap tool (without the sliding head). Im a window cleaner and am looking to purchase it for cleaning tracks and I can't find this measurement anywhere.

These are not never stick pans I was so hopeful. I have had one of these pans for less than a year. Never used metal in the pan. Never used anything but a gentle sponge to clean and yet already the inside is staring to look a bit like these in the video. The surface is thinning, food is starting to stick and burn. Just like these pans, the base is still shiny and silver - not black. I’ve never ever had a pan where the surface has degraded in such a short space of time. Shame

They are not scratch proof. You are scratching off the never stick coating. My 3 year old never stick pot and pan set look brand-new. Had Tefal they don't compare to Scoville.

I’ve had my Neverstick2 pan for almost 4 years now and it still has great non stick properties. The inside doesn’t look anything like yours though. I’ve been cleaning with the rough side of the sponge, did you clean with steel wool perhaps? As others have said maybe this caused rust or something.

idk about in your country's cars, but in ours, the heater being on would not be an issue since you could turn the dial next to the individual vent and stop air from coming from the one you have your phone hooked to.

can u teach how to connect these 2 things?😅😅 I WANNA MAKE THIS TRICK,IM BECOMING CRAZY TRIYNG TO CONNECT THEY

Does the mason pearson brush give any dragging sensation on scalp

Yes you right get one size up

6 from the 10 you changed my mind

i find this video interesting cause all my life of downloading java for programming and Minecraft related stuff, i never expected to see a physical item like this from oracle its so cool ngl

The rust seems to stick, you need new pans.

So whats the point of your "review"? You did not mention any specs or tested it. Only to tell the world that there are 90 degree HDMI Adapters? 2/10 review

Lol

Diana deserves to be on a tenner.

Usually lasts me about 4/5 months, I buy 4 at a time

I just got the same fidget for only 1.50€ from Temu

I believe l was at the printers when the original print run was being discussed. The printing company was located at Colchester in Essex. If my understanding of this project is correct, the printers contacted The Bank of England in an attempt to get clearance on the reproduction and print run. Permission was refused and the print run didn't take place. There were proof sheets of five front and reverse copies of the ten pound notes. Banksy signed a few copies for members of staff at the printing company. These were in the Colchester area and possibly still with the original owners. It's likely the others were taken by Banksy ( whose home l visited in East London during 2006 ) and Steve Lazarides....or possibly, someone else. Banksy and Steve Lazarides had a serious fall out around this time as l understand it. I'm not sure if this project was the reason for that. I recently asked a local printer what happened to the litho plates....my assumption is that Banksy kept hold of them. If 100,000 were printed....that's a million pounds of counterfeit currency - where are they all?

Kek,my laser light dont allways work,anyone face same issues ?it light when i start the vacum and in 1 second its off but vacum works…wtf,indont found anything relate to this issue so far

Omg thank you for this video. I had unknowingly taken the little attachment out of the wand and had no idea why the wand wouldn’t attach to the vacuum anymore 🤦🏻‍♀️. You saved me lol

can you attach this to a standard vac hose ?

It’s like me trying to get more length out of my…… nevermind.

Hhh

Mucha teoría y poca práctica.

thankz❤❤❤

I didn't need a hose connector already have plenty . So not really cheeky as they are quite universal. Actually wanted to see how washers worked.

Thanks it helped me 😊

Thanks for at least saying Starlight is light, LIGHT gold, but using only that bright vermilion background doesn't help. It would have been better to show on white ... and black or gray ... and then any other colors you fancied.

This video was a great help, thanks!

Is this cable from the Amazon brand good? Do you recommend it to me? 🤔

Thank you for posting this!

Спасибо за видео. У меня такой же пистолет, только более старой модели, там немного другой поршень под нажимной рукояткой, но проблема в том, что на детали в котороую входит поршень, от воды образуется накипь, кальций и ржавчина, и пистолет начинает протекать под нажимной рукояткой. Также от времени лопнули резиновые уплотнители под желтым кольцом где распыляющие насадки, не знаете какого они диаметра и толщины, я хочу заказать новые. Также у моего пистолета не возможна поломка, которая произошла у Вас, так как эта чать с внутренней резьбой находится внутри прорезиненой ручки и ответная часть коннектора в нее вкручиваеися, а не как у Вас накручивается снаружи!

Good 👍

@unboxlegends can you use this on an iPad?

Do these work?

Very useful video, many thanks. The only thing I don't agree is the build quality. I think it's very poor with weak little pivots and poor waterproofing inside. For what it is, it's very expensive.

the triggers go on these which need fixing when they stick as the spring is the issue. Also mine leaks terribly at the connection between the base insert and gun itself. I replaced the O rings and used PTFE tape it still leaks. crap really

Where can I find this color?

It’s a beast of a watch, very cool watch 😎

Great watch,I have it on my wrist.

Was yours glittery?

Slim Shady Terpopuler Lagu Anak

Shop Japan

Hello, I've been trying to buy this exact model of Dyson vacuum cleaner and have searched everywhere. Please could you let me know where you bought it from? Many thanks, Gina

Hello, I've been trying to buy this exact model of Dyson vacuum cleaner and have searched everywhere. Please could you let me know where you bought it from? Many thanks, Gina

Thanks for this - interesting to see that break. Mine has developed a leak within the handle, probably due to frost damage as I foolishly left it outside on the end of a hose under mains pressure 🤦 ...my fault entirely. However in my defence I don't think the temperature got very far below freezing for very long and I was therefore surprised to see this leaking. Your video though reveals why this unit is not as strong as I thought it was. I assumed that the internal 'pipework' was metal and not plastic, so it is not very robust. Having seen your video I am going to try repairing mine as I hate throwing things away but I cannot see how you are meant to open the unit up when the trigger retainer isn't broken. Thanks again :) PS. Managed to get in - you just have to push those orange plastic tags in that double up as the handle pivot (not easy). The break/leak has happened just under where the rubber o-ring is that the bottom steel Hozelock fitting screws onto so I've bedded it in silicone and injected some into the base of the handle to try and strengthen it. It is clearly a weakness in the design where the super robust steel fitting meets the plastic.

I'm sure you had a very good reason for not actually placing the phone inside. Thanks for helping me dodge this thing

Now that new iPhone has C, they need to make C to C and HDMI cable. Androids will buy too.

2:18

Is this head compatible with v11?? Thanks un advance

i like this shoes very much