วีดีโอ

The Skydroid C12 is not waterproof so it has no protection level

You can email our technicians.tech@worldronemarket.com or tech2@worldronemarket.com

H30 can be used with SIYI AI II and SIYI cameras.

You can send us your questions by email so that we can better help you solve the problem. “tech@worldronemarket.com or tech2@worldronemarket.com”

Hello sir, UniRC7pro can only connect up to two gimbal cameras.

Yes, they can be used together.

hi sir, if you are interested, you can contact my email 'claire.li@worldronemarket.com' for quotation.

Hello, if the C20 and C12 gimbal cameras are connected to the same receiver, the FPV software can only display one. If you want to see the other one, you need to switch the line in the software.

Hi Sir, You can go to the flight control section on our website to choose the right flight control for you 'www.worldronemarket.com/product-category/product/flight-controller/'. If you have other needs you can contact my ermail 'claire.li@worldronemarket.com' for quotation.

C12 it has a wide field of view, clear images, and can observe various heat sources from a long distance.

You can use just one. In the video, we used two to test accuracy.

The receiver of H20 uses S.BUS protocol. Its receiver is just a receiver, not a flight controller.

@@worldronemarket I mean between transmitter and receiver. 2.4 GHz radio protocol that is.

@@davidjacobs8558 Yes, the transmitter and receiver use a 2.4 GHz wireless protocol.

@@davidjacobs8558 Yes, H20 is 2.4G frequency band

The actual range depends on the flight environment, as different environments can affect the flight distance. The H12 Pro has a maximum communication range of up to 10 kilometers.

The C20 video output is via the network port.

@@worldronemarket Thank you! And is it compatible with the SIYI MK15? Because that is my current setup.

@@Chretze Yes, C20 is an Ethernet camera, and MK15 air unit also has an Ethernet port. You just need to change the connector according to the line sequence and you can use it.

@@worldronemarket Fantastic, thank you!

Hello, you can send your question in the form of a video to our email, so we can better assist you. Email address: tech@worldronemarket.com / tech2@worldronemarket.com.

There are no other versions of the firmware. The remote control does not come with Google services initially. Therefore, if you need Google services, you will need to flash the firmware. If your device already includes Google services, there is no need to re-flash the firmware. H12 Google firmware link: drive.google.com/file/d/1IIDDxj2IyUrLk8w33QP-Fb_opcJUohFd/view

Without installing a camera

Sorry sir. We can't help you when it comes to development

Buildings will affect the transmission distance of drone signals.

@worldronemarket but still u think I can get some range ?

@@worldronemarket do you have any devices that can make it work in more like urban areas?

@@Johnson_wick Yes, the drone can still be controlled, but tall buildings will greatly reduce its transmission distance, unless you find a commanding height so that its signal is not blocked, or use a data transmission module to enhance the communication distance. I suggest you here If you need Chinowing's products, you can contact our sales claire.li@worldronemarket.com

Hello, this is the instruction manual in both Chinese and English drive.google.com/file/d/1H4REqfo7FE25PP9eCpTxcIMyPaYfEavY/view?usp=drive_link

How long has the remote control been used, and have you tried using other chargers to charge the remote control?

Hello. If you encounter problems you can send us a technical email. tech@worldronemarket.com tech2@worldronemarket.com

It remains effective even at a height of 400 feet

@@worldronemarket that's awesome

Hello, you can send your question in the form of a video to our email, so we can better assist you. Email address: tech@worldronemarket.com / tech2@worldronemarket.com.

Hello, you can email us the specific questions you encounter, and we can better answer them for you. tech@ worldronemarket.com / tech2@ worldronemarket.com

The following is the user manual for C12 (containing both Chinese and English versions, with the first part in Chinese and the second part in English). drive.google.com/file/d/1w8Bh-v6Agl18_khhlMBaG__Ju5Mfhq48/view?usp=drive_link

@@worldronemarket thank 🙏

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

You can use SIYI MK15 or MK32 handheld ground station to display the video.

If you use RTK mode, you must be equipped with a base station to operate, and you also need to use a data transmission module.

@@worldronemarket what if I don't want use base station. Is it the same performance in accuracy like Neo 3 GPS or there is some difference if so which is the best for accuracy thank U

@@benhurisaq7712 If the base station is not used, it is just ordinary 3D positioning, and its accuracy performance is the same as Neo 3 GPS.

@@worldronemarketThank u for that, & what if i use 2 Neo 3 GPS vs 1 Neo 3 GPS is there is a difference in accuracy

@@benhurisaq7712 It's just one more redundancy, and there is no difference in accuracy.

It is possible, but not in the SIYI QGC. The AI module can only be used in SIYI FPV. Now, SIYI has launched a new ground control station, UniGCS, which can also be used with this software (currently only compatible with SIYI remote controllers).

The power cable connects to the battery and then distributes power to four motors through a distribution board. You can check the installation and configuration tutorial (1) where we used the distribution board. th-cam.com/video/frCFCDaS1Ss/w-d-xo.htmlsi=jcs7MTjBudnzRNXZ

@@worldronemarket Is the Wire connector series or parallel (Between the Battery and RC power input)

@@rohanvijapure-q7w parallel circuit

yes, you can calibrate the compass indoors

@@worldronemarket I used to think that it shouldn't be done, because you have to get a good GPS signal, but it turns out that's not the case, okay, thank you 🙏🏻

This is possible if the camera supports 3D mapping

@@worldronemarket and what cameras do that pls

@@Jaceace87 Sorry, we don't have this type of camera on our website. You have to find it yourself. To realize the mapping function, in addition to the camera, you also need compatible software to generate models from the data collected by the camera.

You can send your inquiry to our email so that we can better assist you in solving the issue. Please send it to tech@worldronemarket.com or tech2@worldronemarket.com.

Hello sir, the recommended size of this power suit quadcopter drone frame is 900-1100

@@worldronemarket thank you , one more question dose it work with the controller pixhawk 2.4.8?

@@mohamaddar6231 Yes it can connect to pixhawk 2.4.8

@@mohamaddar6231 Yes it can be used with controller pixhawk 2.4.8

Sure, once the video is ready, we will @mention you here.

You can refer to the assembly method in this video, but we didn’t fix it to the 450; instead, we just used a foam pad underneath because there weren’t suitable holes to fix it. You will need to measure the dimensions accurately and drill holes in the board for assembly. th-cam.com/video/9rzk8WKZxFo/w-d-xo.htmlsi=DaWc1GNYZDfEZhAL

Skydroid H30 has an HDMI port