วีดีโอ

@9:20 For the tracking force when I try this on my 1249 the platter automatically starts turning so I cannot do the calibration properly. Any tips?

i need this kit but i am live in turkiye :(

Hey there recently got a dual 1215. It is completely missing cartridge, stylus and the head shell piece that it all locks into. I’m trying to find that head shell piece but having trouble know which to order? Any ideas

Shure V15 type III and dual 721, my setup exactly.

do you know where I can order the rca to those snap connections that appear in the bottom left picture of this youtube video?

Thanks. Couldn't have done it without this video : ) Perfect.

Was haben Steuern mit pimpeln zu tun ? 😂

Oouuff finally a proper demo. I just bought a 1229 and I was scared to do anything on it. Now I can.

I have owned Dual turntables for 50 years. Now I know what a steuerpimpel is.

Thank you

I had my repair guy in Long Island (who specializes in Dual) tell me that he got rid of the old steuerpimpel and now there's no anti skate option on my turntable, but not to worry. He said it didn't matter. Your thoughts?

I replaced mine with a piece of rubber eraser from the end of a pencil. I measure the diameter of the metal peg, drilled a hole in the eraser, cut it off and stuck it on top of the metal peg, works great. Great video, very clear and well explained, especially your disassembly and handling method, thank you so much for sharing !

You are the best

What about the Grounding?

Greetings, does Dual 604 (TK 230) also potentially need spacers for the the new cartridge or is it only needed for TK-14/TK-24 like on the video?

GREAT OLD TURNTABLES FOR THE PRICE // HINT> BUY BLUE TACK FROM DOLLAR STORE SPREAD LIGHT EVEN COAT TO INSIDE BOTTOM OF TABLE, THIS WILL TIGHTEN UP THE BASS QUITE WELL, I SOLD DUAL & DID MODS. ON THEM BACK IN THE 60s THRU 80s

You have to cut the ground bridges, when you change to cinch with both ground connections.

Thank you

Unfortunately my belt won't go down on the spindle after changing speed from 33 to 45 rpm. It is stuck halfway. Any suggestions? Also try a new belt, but the same issue.

The hinges I bought are not as elaborate as the one you are using. You did a great job, I didn't think of using the multi-toolbut that makes the job much easier (I was going to cut with a coping saw instead). Also, using the masking tape is a good precaution for not damaging the surface of the dust cover. Thanks for the help, you did a fine job.

Now I realised how to use anti-skating

Replaced RCA cable and am getting constant low-level hum. (Old cable was intermittent hum, sounded like broken wires inside the cable; you could adjust cable and stop the hum). CS 1268.

A perfect example of a well made, clear TH-cam guide. A lot of effort made to make it so clear and concise. Thank you.

If I buy from Canada how long it will take to ship? It doesn't specify when I try to order

This channel/site safes my ass every time. I’m happy you exist❤

Thank you for an excellent instructional video. As someone who watches many DIY videos and also as someone who owns several Dual turntables, your very complete and well produced tutorial is much appreciated.

Im replace only din on cinch 🤷

Sir, I have same turntable where can we get the pimple.

Excellent video!! Thank you!

Why am I replacing and with what. Just asking..🤔

Only problem was it appeared as though the stylus cantilever suspension failed, given it bottomed out when you lowered the tonearm. Either that, or your tracking force was too much.

Do we need to put any grease or anything on the surface the steurpimpel rides on? It seems that some recommend molylube but ???

Hello! Its fit to 741Q?🤔

Is there not a little plastic protractor to align the cartridge in the headshell sled? I have a 1229q it seems to be a step taken when replacing a cartridge on that model.

Hi can the spring brackets be replaced as well? Both hinges on cover have broken and one on the actual deck. Thanks in advance

Are you still selling these ? It’s 2 years down the line. ..😊

Does this procedure also work with the CS721? Would I use the same alignment and spacer kit. Thank you.

Can you still play records if you dont have the steuerpimpel? Can you just do the movement yourself?

You guys should make a dual turntable dustcover repair that slides over the rear panel. It is often found cracked with missing pieces.

Very useful video but what I click on the link to buy the hinge my AV software strongly recommends not visiting the site. Why is this and is their an alternative way of buying if I need?

Thank you for your explanation. Can you explain how to install and calibrate the tonearm?

Muy agradecido por tu video ..yo me compre una dual 1225..sonaba genial ..pero el cable rca estaba malogrado ..lo cambié y ahora suena un ruido parasitó que no se de donde viene ..no se si debí haberle cambiado el cable

>>>Success<<<<! 🤩🎵

I cannot thank you enough for this BRILLIANT tutorial. I have had real problems with my Dual 505-4 recently and really wasn't sure what to do. I was reluctant to buy a replacement as I have owned my 505 from new since 1984 and I am sentimentally attached to it! It has been very temperamental when switching from 33 rpm to 45 rpm and typically did not change speed but stayed at 33 rpm. Today was a new problem altogether though as when I returned the switch to 33rpm from 45 rpm, it would only rotate at about 5 rpm. It would though play a 33rpm record correctly when I clicked the switch to 45 rpm. I followed your instructions and found the belt was still on the spindle but had twisted somehow - I untwisted it and tested the different speeds and all now works perfectly. I am so grateful - why the belt was twisted though remains a mystery. If it happens again, I now know what to do but wonder if you know what might have caused the belt to twist on itself? Thanks so much again

great work.

You just helped me to fix my CS701 with molten power supply. Giving up on the original unit, I went for a plain 12V DC supply (LED-string type). Missing the stroboscope and havin to adjust speed, but otherwise fine. Thanks a lot for your very helpful video!!!

Hello, I have the dual 1241 I'm having an issue where the unit worked great but now all of a sudden I'm getting nothing from the left side of rca is this a cable issue or is there a bigger internal issue with this unit that needs repair or replacement?

Thank you! I replaced the RCA cables on my CS 505-2 and this video pointed me in the right direction. Details are different; the internal connection and the cable protector was hard to remove.

hello . although I replaced the wheel from another dual I have it seems that the antiscating doesnt work. what could be the reason for this?

I would seriously not use WD40. WD40 will dry to a gummy residue that can act as an insulator. What you really want os a contact cleaner or isopropyl alcohol. Other than that, the rest of the advice is pretty good. Thanks for a great video. I have a Dual 1015, which is a bit different, but uses the same alignment and similar headshell design.