วีดีโอ

Thanks 👍

Thanks 👍

Hai, for the front is stock diferrential and rear axle is lock diff axle for MN/WPL. You can check in the descrioption box.

Its is a common drive shaft mate, i did drill the shaft hole to make it bigger to fit stock diff.

@@yairc oh ok

Caz I got all the other stuff but the stock driveshafts don’t fit now

Betul sekali, dalam rancangan awal memang ntuk realistik cinematic saja. Terus terang, semasa mengambil video ntuk cinematic. Kawalan kereta amat teruk dan tidak memuaskan, kereta tidak mampu untuk mengatasi halangan yang mudah. Dari sudut pemainan kawalan, kereta ini memang tidak memuaskan. Tetapi kalau dari sudut kecantikan dan realistic, bagi saya amat berpuas hati. Terima kasih kerana menonton dan memberi komen yang positif.

@@RCplamodel TQVM for the nice words. God bless

@@technicaltreats2704 yes, you need 4ch or higher radio system to support it. You might want to watch the whole video, peace.

Thanks for watching!!

hai, its does not come with wall mount.

you can see in this description box below, its a FPV set. (1200VTL CMOS) th-cam.com/video/u4HbLkAIfSc/w-d-xo.html

@@wandydychahrc2530 racun yg menyihatkan..🤣🤣🤣

@@wandydychahrc2530 terima kasih

Hai bro, yeahhh..my local sarawakian finally. Kmek pakey hex sleeve dari 5mm to 7mm, beli di shopee. Mun ada 3D printer dpt print kediri. Ctok link tmpt kmek beli ya:- my.shp.ee/vdXspvS

Yes, thanks bro for the compliment. Just sharing what i love to do and in the side hoping to help others gaining any sort of valuable information from the video.

Thanks sir!

hai, links below. TQ for watching. Battery - s.click.aliexpress.com/e/_Dk6ahZD Transmitter - s.click.aliexpress.com/e/_DcxmswR p/s: battery link is not exactly what i used, but it is the same specification. 2S 850mah LIPO battery. It is from my walkera FPV drone.

hai, links below. TQ for watching. Battery - s.click.aliexpress.com/e/_Dk6ahZD Transmitter - s.click.aliexpress.com/e/_DcxmswR p/s: battery link is not exactly what i used, but it is the same specification. 2S 850mah LIPO battery. It is from my walkera FPV drone.

@@yairc thank you

@@yairc could you tell how to connect the battery and whick pin esc should I buy

Hai, im not sure i understand you.

@@yairc like the battery has a jst pin right, but the esc doesn’t have a jst pin one

@@pdiddy8509 no loctite, just tighten. You can put little bit of it if it bothering you, to be in safe side.

@@sakuraart maybe it was snap fit, mate...fyi im buying my childhood. You should do the same..🤣🤣🤣

Yes

yes sir

Thanks for watching!!

@@technicaltreats2704 its a crawler type RC so didnt bother to test the top speed. I have to guest, probably below 30kmh.

@@technicaltreats2704 no sir

@@technicaltreats2704 no, rear light remain

@@mohuyasaha3275 not really, on smooth bed sheet yes..but on fluffy blanket no.

ive tried putting it on 540mm (You can probably manage tilt on XK a280 540mm if you use a micro servo) and to be fair, 800mm with a big canopy would be your best bet like FMS trojan, or even better FMS ranger 850 (it has GPS RTH which is good if you loose FPV).

@@NSChenRC1 Thanks for the answer and advice. I'm just a beginner, I think I probably won't be able to master larger planes. I have an XK A280 P-51 560mm and a QIDI-560 Maule M7 510mm. If it doesn't work on mustang p51d 400mm maybe I'll try a bigger plane. I want to try only simple headtracking left-right direction, I know that because of the weight it might not work perfectly - th-cam.com/video/7nvP87VdSao/w-d-xo.htmlsi=3QtuDCraC3gMX87D

@@Ambobeat The XK a 280 is a good option. The problem with it is that the flight controller circuit board is directly under the pilot area. So you will need a short microservo (3g) to fit into the canopy unless you put it on the nose of the plane. you can get a split JST wire to power both Headtracker-Camera and Plane. 5V BEC for the Headtracker-Camera setup. I recommend walksnail Caddx goggles L and walksnail Caddx Lite 1s kit. It runs on 3.7-5V power so you can technically wire it onto a servo plug and power it with the BKRC receiver on the plane. (If you want clear quality videos, otherwise analog FPV systems will do) Heres an example of such a similar setup > th-cam.com/video/BJIPhWE6Ch8/w-d-xo.html

@@NSChenRC1 Thanks for the information. Caddx goggles and kit they are already a bit expensive for me, even though I have no doubt that they are of better quality

@@technicaltreats2704 i didnt weight it, but ill take note on your interest.

@@technicaltreats2704 no, plastic drive shaft. Axle having metal gears.

@@DoingRC thanks for the compliment.

Check out the part 2 of this video

@@technicaltreats2704 yes, it is 280. Not 370.

Yes and no, yes you could get away with some of WPL upgrades parts. No not lot of upgrade parts. BTW, out of the box it is hobby grade.

Hai, the one you saw my Baja is not a real radio antenna. Its just my old school look decoration. Back to your question, you can get long range from ELRS ready radio from radiomaster. I am using affordable WFLY X4 radio system which giving my somewhere 300m range. It is far enough for me, more than that i cannot see my Baja. I hope its help.

Not in my plan, but i could do some simple video.

@@amirulhakim5558 easy to disassemble. Long pcb circuit the length of the car with lithium battery on top & motor underneath with a few gears for torque

hai, you still can get it from Aliexpress. Link below is for brushed motor version but you can easily change it to brushless if you want. s.click.aliexpress.com/e/_Dk4iXC7 it may not the exact same i have, but it is the same gearbox. I got good deal for it before.

@@Gamerdood437-qy6dv it dive as long as you press the throttle and not steering, once you start steering it lost momentum and try to afloat. Thats why when you see it turn, it will want to go up..it you have a big swiming pool, maybe you can get under water for a long time. Thanks for watching.

@@robertadamecz143 this is 1.55" rim with 75mm tire. Thanks for watching.

@@yaircGreat! Im waiting for the 76mm tyres. Maybe i have to do a little bit of trimming on the body.

Yes, you need. This 75mm already touch the body. Next video i will cut the body under the fenders. Im planning to change to straight axle to see hows its look like.

Hai, below is the TX for the cam unit, thanks a million for watching. th-cam.com/video/u4HbLkAIfSc/w-d-xo.html

Thank you for watching

@@DoingRC 🤣🤣🤣, thanks for watching.

@@yairc 👍🤣

@@MrBuddy7798 thanks for watching.

Bro, head tracker reciever rated for 5VDC. You could fried the tracker's reciever if connect directly to 7.4vdc battery. Take the power from the plane reciever as it should be 6vdc. Look out at your plane receiver BEC output.

@@yairc Thanks for letting me know, im putting it in a RC car thats why. Ill just have to use a 5V regulator

Yeah, there is an independance BEC you can get. 7.4V to 5V BEC.

@@yairc i got the 5V BEC it works