วีดีโอ

👍🏻

👍🏻

Bummer the door wasn’t closed all the way at first 😅

The best ASMR window cleaning from San Luis Obispo

Visit us at supersqueegee.com/ Take a look at our sales software at get.responsi.bid/LCCXLE

Good content here. Ever bring water on site?

water pressure insane!

He is the Cream of the Crop! I live in Indiana and tomorrow reaching out to this owner asking him to hire me and train me for 6 months and then I am coming back home to Indiana opening own Window aClewning business ..I would be honored to have this legend train me!

This is awesome! Thank you so much! Will you be competing in Vegas in February? My hubby will be for the first time (from Hawaii). Hope to see you there. Thank you for the intel 😊

now with lese conductive water-fed poles tested to 20,000 volts!

please help, how the hell do I take off the clips on the Moerman?

I missed the point you were making about when you make fresh solution. Do generally speaking, y'all clean the exterior first and then when you switch to inside you make a new solution?

I did a whole house with these windows but the blinds were on the bottom and raised up. There were 4 strings hanging from top of insert and blind comes up from bottom of insert. Someone has to hold the blind out of the way so you can squeegee other than that your video was spot on on how to clean these

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

Learn more at supersqueegee.com/purified-water-window-cleaning-with-waterfed-extension-poles-no-ladders/

supersqueegee.com/what-is-the-best-thing-to-clean-windows-with/ visit our website for more information

Nice🌞

👍🏻

👍🏻

supersqueegee.com/what-is-the-best-thing-to-clean-windows-with/

You could have used a small maykker sleeve and washed and buffed that out with 1 slightly damp and 1 dry Glass Microfiber cloth.. This is what i would have done but that depends on how big and how many windows . if it was just 1 or 3 i would rather use the maykker sleeve .

Excellent video

Ok good idea.

Hey man. Great video. Curious. How do you get so much pressure out of your system? We currently don't get nearly that much lol

I have these windows. The blinds pop in and out as a unit in a second, way easier to clean them with the blinds out plus you can get to all the glass. Roll them up and there is a pull tab on the opposite side from the slider, pull the tab out away from the glass and a geared shaft disconnects the blinds from the side. Bigger windows will have support clip in the middle you need to unlatch first. They are still a pain...

Hard water build up, I have tried everything to no avail. Good job cleaning dirt, etc though. Thanks

Great video! I love cleaning glass. Did you say brass wool to help with the stubborn grime? i have been using 0000 steel wool. Yes it does rust after it gets wet but hopefully will not scratch the glass.

Thank you for this helpful video.

Try removing your face mask and maybe I could understand what you are saying

LF husband

I am retired from 35+ years of window tinting. I first noticed this issue in the mid 1990's. I called PPG (Pittsburgh Plate Glass) and talked with an engineer. He told me, back then, that the 'particles' are a result of poor manufacturing: either too low tempering furnace temperatures, or: debris on the furnace rollers from improper cleaning. Since then most glass manufacturers (including PPG) say that is a myth, that NO glass was never meant to be cleaned with razor blades - ever - in the history of glass windows! Yeah, right, that's why there is an entire global industry that has catered to razor scrapers for glass for over a century! Also, I noticed that window manufacturers actually changed (in the 1990's I believe it was) the wording of the "how to care for windows" stickers that are on new windows to say 'never use a razor to clean'. Anyway, I have never encountered tempered glass manufactured before the 1990's that would scratch. (and there were a lot of older commercial buildings I tinted). The newer, cheaper tempering processes that include 'chemical' tempering will almost ALWAYS result in scratchy finished surface. That is why that "insulated" tempered units SHOULD be assembled with the tempered surface as surface #2 or #3, which would be surfaces that face into the insulating space. That is the same surface that the manufacturers logo's, marks and codes are etched on. If that etching is NOT between the glass panels, or it is a single pane commercial door, then the chances that the surface will scratch is nearly 100%. The same is true for LOW_E coatings. If the coating is NOT on surface #2 or #3 your razor will leave dark gray streaks as the "silver" is scratched and instantly starts oxidizing. I think some window manufacturers actually proudly proclaim that the LOW_E surface is #1 or #4 on their premium windows!!! The most efficient surface is actually #2 (as counted from the outside surface as #1). I have turned down 1000's of $ worth of work because I WOULD not scrape walls of glass on the lakefront side that I PROVED to the contractor were going to be scratched. The physics of tempered glass made it way too dangerous to do. The surface scratches WILL concentrate stress that the tempering is supposed to absorb/mitigate/relieve. Window glass industry actually have detailed pictures and charts on how to determine if a crack/fracture is from impact or thermal stress, but disavow any knowledge or repeatable demonstration that tempered glass in now much worse in surface quality. Hope this helps someone who is "BLAMED" for scratching a customers window .

What kind of pole are you using

Talk too much

Thanks so much for this video.

th-cam.com/video/sfmAeijj5cM/w-d-xo.htmlsi=Lrqp8mgVKsoWI4qo

🔥🔥🔥