วีดีโอ

Yos , it happens ever once in a while

​@@Nolanreidhave you tried placing a puck screen on top? Or a paper filter on top of the puck?

As high as I could set it :)

@@Nolanreid This is the proper way because the machine uses dev point % vs setpoint to adjust the power to the heating element. i.e. Heating to 130c takes longer time pid set to 130 than heating to 130c when pid is set to 140

Double basket , VST ridge-less

Love it , I wish I could borrow one for a review !

@@Nolanreid i like it, but if they add rotary pump instead of vibration!

After having one now for almost two years. I can surely tell you that it is not built cheap . Perfect machine to buy at this price point . Mine is a work horse . Never failed or let me down. Pick one up you won't regret it

@@Nolanreid Thanks for the reply - appreciated.

@@Mirandasiwillja mine is between 25-35 seconds from the time is starts to show liquid

I did not grind fine enough

I turned my steam up as high as I could , I hope this helps !

@@Nolanreid thanks that did help. Also when you turn your machine on. Does it go past your set PID temp? I notice that I have to flush it to show temps. It shows temps of 240-250, then I needs to flush to get it back to 200.

@@nickho4320 no mine stays at 200 , but I heard that the newer machines have new software .. I would recommend flushing before making your first shot anyways . Evens the temp out in the group head

Thank you for the feed back , still getting back into editing after having a long break . I will upgrade to Final Cut Pro soon , I know they have a better music selection

Done ! Check out my new video ! And thank you for the great idea

I would imagine you have ground too fine , how long are your shots running for ? From the time it starts flowing until your 1:2 ratio is complete ? It should be around 30 seconds

From start 25-30 seconds, but it Starts flowing when Timer Hits around 10-13 seconds

Are you using the stock basket? I would recommend upgrading to a VST basket if you’re still using the stock one .

@@Nolanreid no Using one 3rd Party basket. I feel like when I grind grosser it drips too fast

Coarser

Most newer machines do , unless you go with plumbed waterline and just use braided hose

I will add that to my list! Thank you for the idea

I bought the ECM Bottomless from whole latte love .. and it’s matched with a dual shot 20g. Ridge less VST basket

Sorry I bought them from a private dealer at the one of a kind show in Toronto

Yes grind finer !

You need rly expensive grinder for proper espresso and you have to play with settings always cause as coffee get old you need to grind finer and finer.

You might have to replace your gasket … what basket are you using

@@Nolanreid its that red silicone one. I got the recommendation from someone on TH-cam

It’s a gen 1 ode so it is not good for espresso

48” husky tool bench

I don’t think so , but I am also not the best person to ask

It’s not meant to be used in that way. I believe it could cause damage.

Horizontal ..

Love this machine , trust me you won’t be disappointed

I have the calibrated tamper , the needle wDT tool , and the distributor.. all 58.5 mm

Thanks!

I don’t understand what you mean

30-35 for me .. and yes very repeatable… everyone has there own taste so tune your machine how you like it

Hi ! Yes I do .. I always do it after making my full latte … that’s another reason why I use the 20 oz pitcher .. initially to purge water out of the boiler as recommended by the manual .. but I also hold it under the group head to catch all the water when purging the steam .. and it doesn’t make a mess

@@Nolanreid yes, I have the same machine but I only put a short mug under the brew group and what a mess. I begin to stop steam mode when I am steaming milk when the temperature of the milk is around 45-50 Cº and continue steaming till 65 Cº. I think the big mess becomes a smaller mess.

Sorry that was one of my first videos , please check out my new ones . They do get better

Yes about 5 mins or so .. I put the portafilter in when I turn it on .. and flush through the portafilter :)

Ok thanks for informing me. I guess not too much of a issue. Iv also been in touch with the retailer regarding the machine being abit wobbly from the left side. Aparently the one in the showroom is does it too? I feel like im being fobbed off. Is urs fully 100% stable and stuck to the countertop? Or is there a slight movement from left side?

@@jeelanpatel158 mine does not move a inch. Where did you get it from ?

Just DMd u on insta. Which will let me send you a video

Yes thank you , I am still new to editing .. trying to make every video better than the last. I cranked my steam temp as night as it would go .. hope that helps .. and thank you for watching

I would contact profitec , and see if they can walk you through leveling the feet .. or they might suggest to ship it back and get a new one

I had the same issue. I contacted Clive Coffee where I got mine and they replaced it. The drip tray metal was bowed which caused uneven sitting on counter. Look at it from the side and you can tell if it’s bent

​@@dearcoffee85 the retailer didnt want to accept my issue they accepted a return wirh a r.efund. I bought a replaxwment and no issues since. Amazing machine

Yes it is the factory one … I find holding the steam tip so it shoots down both sides of the jug … keep the tip at the back … and let each jet shoot opposite to create the turbulence you are looking for

How long are your shots running ? And are you weighing them ?

Good choice!

You won’t regret it .. welcome to the GO family

Hey @@Nolanreid ! Got my machine yesterday, what a beauty. I missed my milk 4 time already on it ahah, trying to make myself some cortado. You have any tips to get the milk swirl going? I just cant get it right ahah.

I steam 2 percent instead of whole milk … I put my steam temp up as high as it can go .. and purge as per the manual . Listen for the high pitched squeal for a couple of seconds and then put the steam want in deeper and watch for the turbulence .. heat until it’s hot to touch . Try pouring into another pitcher first and back again .. and practice practice practice

Thanks. Will do. Realized I didn’t have the steam all the way up as well.

I do not , without taking it apart … only thing I can recommend is running water through it a couple of water tanks worth . Hope that helps

Hi ! Yes I raised it all the way up . And I follow the recommended instructions for purging water before steaming

Yes, thanks

I sent a message to you on Facebook :)

I love it as well

I love my Go , I think it’s a great step up without breaking the bank . I say go for it ! Thank you for watching , and. Please subscribe if you haven’t already

@@Nolanreid thank you for your reply! How do you find the noise level?

Not bad at all , and it’s only for 35 seconds are so

@@Nolanreid that's good, I saw another video and the guy commented on the noise level. Thank you for getting back to me

Thanks! Will do!