วีดีโอ

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment. I hope you enjoyed the video and if you can leave me a thumbs up.

Thank you for your comment and thank you for the thumbs up. I hope you continue watching.

Thank you for the information. I hope you enjoyed the video and if you can leave me a thumbs up.

Well, these blades are very expensive at Home Depot and I go through a lot of them the saw all used to be my favorite tool and now the multitool is my favorite tool. I know once you get the machine you’ll like it. It does work takes a little bit to get the blades exactly the way you need them, but it’s really not bad. It does save on the blades on my blades up and then do them all at one time let me know how it works for you if you see on the video I made a little pocket for the machine to sit on otherwise it moves too much and the one part where you put the blade on is a little flimsy. I think he could’ve done something better but other than that, it works really good. I’m glad you enjoyed the video and if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your question. Yes I found that stix is a better primer. Remember, though the most important thing is the cleaning you must clean thoroughly after you put the primer on put two coats of the Benjamin Moore advanced paint. I hope this helps you and if you can leave me a thumbs up.

@@buildingwithpapa Yes, I saw you saying to wipe the degreaser off with a damp cloth. I have a habit of wiping everything down with denatured alcohol before I paint. Is there any reason denatured would be a bad idea for removing degreaser residue, does it react with thermofoil?

Thank you for your question. What cable do you have? Is it a non-tangle does it have a swivel? If so, it could be part of that but usually if it’s a non-swivel type it would not be the cable I hope this helps you and if you can leave me a thumbs up.

@@buildingwithpapa no swivel, at least I don't think it does. It looks like the exact same one you have based on when I removed the impeller cover for cleaning.

Thank you for your question. I re-watched the video twice because I didn’t remember saying that it knew it was out of the water. It doesn’t have a sensor and re-watching the video. I don’t see where I made that statement. so I don’t believe there’s anything wrong with your unit. I hope this video helped you and if you can leave me a thumbs up.

Your motor might be jammed

Thank you for your comment and if you can leave me a thumbs up.

@buildingwithpapa 👍

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your question if they are flushed with the exterior, you would still do the exact same thing if you’re going to use these panels or you can do an accordion which sets it a little bit off the face and they are better than the panel system, but they do cost more. I hope this helps you and if you can leave me a thumbs up.

Thank you for your comment and no, I don’t mind you asking in the description. There should be a link to purchase the switch. I got it on Amazon Amazon. I hope this helps you and if you can leave me a thumbs up.

@@buildingwithpapa already did and subscribed. 👍

Thank you for your comment. What year is your Escalade?

Thank you for your question. I used contact cement. It worked really well. I hope this helps you and if you can leave me a thumbs up.

Thank you for your comment. I hope that once you watch this video you were able to put it back so you can leave me a thumbs up. It really really helps the channel.

Thank you for your comment and if you can leave me a thumbs up

Thank you for your comment. I didn’t have a microphone back then I made a couple more videos on how to do this process that has better volume. I hope the video helped you and if you can leave me a thumbs up.

Thank you for your comment. If you would watch the video all the way through I put silicone on all the joints and the screws. It works very well. I hope you enjoyed the video and if you can leave a thumbs up.

Thank you for your comment. I did use silicone on all the joints and on the screws. I hope you enjoyed the video and if you can leave me a thumbs up.

Thank you for your comment. I’m glad you enjoyed the video and if you can leave me a thumbs up.

Thank you for letting me know. I will contact them and find out what the issue is.

Thank you for your question. It could be the amplifier I was unsure of mine. My speakers would go in and out. They would work sometimes and not others. They would make some static noise and I found out it was the amplifier you need to remove the amplifier. follow the video numbers on the amplifier I showed in the video, and then you can one. I think I got mine on eBay and follow the instructions. There’s one screw that’s a little tough to get to but you will be happy once it’s done. I hope this helps you and if you can leave me a thumbs up.

Thanks so much I built up the confidence to tackle the radio no sound and you were 100% correct. The 2 cylinder parts that's wrapped in a coil type style has burnt up 😞. All I need to do is find myself a replacement 👍🏾

Thank you for your question. That junction box is a transformer if it’s heating up then it’s possibly getting ready to go bad if you have swish ball colors switch it to a lesser one and see if it stabilizes. If not, I would change it out. I hope this helps you and if you can leave me a thumbs up.

No, I haven’t had any issues with it. I hope this has helped you and if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment. I’m 68. It’s really not that bad to get in there. I’m glad this video helped you and if you can leave me a thumbs up it really helps the channel.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment, but I’m not inside my house. I am outside on the porch. I have stayed away from it. I’m not concerned about it. I have worked with these things many many times. Thank you for your concern and I hope this video helped you if you can leave me a thumbs up.

Thank you for your comment and yes, I do have a tripod now and also even the metaclasses it is helped extremely. I hope this video helped you and if you can leave me a thumbs up.

I’m sorry to hear you’re having some difficulty with yours. I don’t know the brand of saw that you have you should be able to order that plastic piece that broke. I hope you’re able to locate that piece. Let me know how it goes.

@@buildingwithpapa mine was a Ridgid as well. The laser is discontinued. Looks just like your laser but a 3 piece assy. The top piece is in 2 pieces. I'm going to try and drill it out and re-tap it

@@BR549_o7 no that’s not really expensive but they have struts most of them have struts today. I hope this video helped you and if you can leave me a thumbs up.

Thank you for your question. I have not experienced that situation but it sounds like to me. It may be in the switch because both of them are failing at the same time so I do not think it’s the light itself. Sounds like a wiring issue but I’m not 100% sure I hope this helps you and if you can leave me a thumbs up.

Yes, as long as your cable is working fine if you don’t get voltage, then go back to the power supply and then also check your cable for continuity. I hope this helps you and if you can leave me a thumbs up.

@@buildingwithpapaI’ve got voltage at the head controller & at the end of the cable inside the robot so I’m guessing my robot itself is bad? I replaced the cable & it ran about 15 minutes and died. My question is if you’ve got voltage then you’ve got continuity correct?

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

I hope the video helped you.

My Mic’s battery was low. I redid the video on another trailer. I hope that helped you and if you can give me a thumbs up.

I know they say not to leave it in the pool, but I leave mine in there quite a bit. Did you go through the diagnostic like a show in the video to find out if it’s the power supply or the wire you need to do that first. I hope this helps you and if you can leave me a thumbs up.

Thank you for your comment. I hope this helped you and if you can leave me a thumbs up.

Thank you for your comment. I hope this helps you and if you can leave me a thumbs up.

It is hard to say unless you’ve gone through the diagnostics like I show to find out if your supply is putting out the proper voltage if you cord tones out then that eliminates your cord then you have to go through other steps, but I don’t know what unit you have Let me know the unit that you have and maybe I can help you

Thank you for your question. Yes, the voltage should only be 30 so seems like your Supply is too high, which is going to possibly burn out your unit. What does your machine do at this time?

@@buildingwithpapa it is randomly working and sometimes turning off mid cycle. My dolphin model is the DL 2014 INT which is about 15 years old. Another question I have is that when checking the continuity of my cable if I put one of my voltmeter contacts on say the white wire on one end and then touch the other contact to the white on the other end I get a beep but I also get a beep it I’m on white on one end and black on the other. Not sure if that should be happening.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

I have a dolphin pool cleaner also and the cord gets pretty tangled, but I have a video and shows how to replace it.

Thank you for your question. Did you run a diagnostic to find out where the power is running or is terminated mine wasn’t the plug it was a micro switch. It would not turn on the power when the drawer was in place these go quite frequently. You need to do the diagnostic to find out, which location the power fails. I hope this helps you and if you can leave me a thumbs up.

I’ve had power sanders in the past and they were much more expensive. I have to tell you I think this one is really good. I like how it folds up and so far I haven’t had any issues.

Amazing

The sander bag isn’t collecting the dust why??

@@deborahlavaara9208 do you mean your machine isn’t collecting the dust? Because mine does you need to check yours make sure there’s nothing clogging the hose or the hose is connected properly.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.