- 2
- 26 755
NeoNicodemus
เข้าร่วมเมื่อ 27 ต.ค. 2006
Fanatec SSQ H pattern shifter badly registering gear repair
Fanatec SSQ H pattern shifter badly registering gear repair.
My Fanatec SSQ H Pattern became flakey registering shifts in 2,4 and 6 gears (others not ideal but these were worst). After re-calibration i still got no better results so quickly overview how i fixed the accuracy of my shifter.
Enjoy!
My Fanatec SSQ H Pattern became flakey registering shifts in 2,4 and 6 gears (others not ideal but these were worst). After re-calibration i still got no better results so quickly overview how i fixed the accuracy of my shifter.
Enjoy!
มุมมอง: 14 175
วีดีโอ
DHT Sensor Raspberry Pi MYSQL how to using python
มุมมอง 13K11 ปีที่แล้ว
Brief video using a DHT 11 to upload temp and humidity data to a MySQL Database every 6 minutes. CODE Below #!/usr/bin/python import MySQLdb import subprocess import re import sys import time import datetime # Open database connection conn = MySQLdb.connect("localhost","le_username","le_password","le_database") # Continuously append data while(True): date = time.strftime("%d/%m/%Y") clock = tim...
Thanks for sharing your findings on this issue.
I tried this steps. It didn’t work :(
Thanks for the vid. Some explanation what you did exactly would have been nice instead of loud music though, Im not sure what you did exactly and why. For those who didnt solve their problem of misshifts with your steps, the misshifts could be caused by bad insulation of one of the small pcb's which presumably can cause some short which results in misshifts. Adding a small piece of insulating tape on the back has solved the problem for me, like described in this vid th-cam.com/video/16SoByd8ycg/w-d-xo.html
Apparently the shifter has a hole in the side of the case to stick the allen wrench through without disassembling ...... Watch this Video and see the adjustment th-cam.com/video/lXS1BLgFQJ4/w-d-xo.html
Excellent tip, shifter now selecting the correct gears!
top! DANKE!
Mine shift gears randomly when I touch the cable near the wheel or shifter. Like the connectors aren’t actually firm enough. Thinking about trying a new cable and then this. I rarely get it not registering gears, I regularly get it registering incorrect gears. Have calibrated it’s countless times. Doing my head in. Trying to race and 4th quite often registers as 2nd so I am forever pulling 3rd into 2nd or worse is compression lockup’s when coming down at high speed from 5th to 2nd. About ready to spit the dummy
Use only the WD?
my issue is going from 3rd to 4th, it will register randomly as 2nd gear, even tho I'm in the 4th gear gate. It's so random that it catches me off guard and I end up blowing the motor... I did a test and after 50 times in a row going from 1st, 2nd, 3rd to 4th and the back to 1st and repeating out of 50 times it did it once where it registered 2nd gear despite being in 4th gear gate...
This is exactly the same problem I have. It’s rare, but common enough to completely destroy my races.
The same issue here in SQ 1.5, after 1 year usage.
Lucas Tano Are you thinking to do this fix? Pretty disappointed after having mine for 1.5 years as well. It gets worse every time I use it. Unacceptable for a $200+ item. I believe friends slamming the gears didn’t help either.
hey bud sounds like your potentiometer is going bad. This was happening to me a couple months back so i just started using sequential mode... A few days ago i tried giving the h pattern mode a shot, now the gears are super mixed up like 1st is reverse and 2nd is 6th and it alternates. Im awaiting fanatecs response
@@gerritbatesisonline good luck. I’ve been waiting over year for there response to the same inquiry. They shipped a bunch of defective units and have no fix.
I didn't do it exactly like the video, but this still worked for me. I couldn't get the connectors off. So I blew it out and didn't even lube it. There was already so much goo in there. I think just jiggling the connectors around is what did it. Who knows, but it is working like a charm now. Thanks!!!
Thx, it helped a lot.
Thanks! :) This tip really worked for me 👍🏿
This damn shifter. Bought mine, had to send it back with in a month for not registering gears correctly. Get it back it works great for about 6 months then it starts doing it again. Contact Fanatic and get told it’s an EMI issue and that I need to ground the shifter. Never really figured it out as Fanatec couldn’t really tell me how to ground it. Another 8 months goes by and the shifter works for a few days at a time then has issues. Contact Fanatec again and get told to ground the shifter to a radiator style heater which I don’t have. I should have believed all the complaints about this shifter over the years. I just wish someone could make a beefy affordable H-Pattern better then the Fanatec and Thrustmaster. I’d spend $500 if there was something.
Fanatec = Failtec, i never will buy again products of that shits company.
Always blaming the customer, saying is user error when its really a BIG design flaw. Esp for $200+
Thank you! Worked a treat 👍
Hey tks for share!!
Excellent! I fixed my shifter on your video. Thank you!
Sweet. Worked for me
thank you!
I'm going to try this ty
nice ! is it a 1.0 or 1.5 css sq version ?
One on the video is the sq 1.5 however I did the same with the 1.0 and worked perfectly
I'm pretty sure it is 1.0 because 1.5 has 4 color wires and a hall sensor to detect odd/even row of gears selected instead of 3-wire flat cable and a couple of micro-switches featured in your video v1.0 www.mockracer.com/2014/12/fanatec-clubsport-shifter-twist-fix.html v1.5 imgur.com/a/vMO5R
I'm not being a smart arse here but wouldn't wd40 wash the grease away for long term use grease would be better i would of thought, , just a thought
Today marks 12 months since i did this maintenance and the unit has worked flawlessly since then so arguably this is better than the factory grease? Good question though - fairly sure WD40 is oil based (Fish oil?) stands for Water Displacement (forget what 40 means i read it on wiki or something aaaages ago) as such it makes a great lubricant for squeaky doors etc so for me i had no concerns using as it still acts as a lubricant much like the grease so i had no drama using it..
Ok thanks I'm upgrading soon from a Thrustmaster tx th8a shifter to a Fanatec csl so this will help thanks for the advice, I've had nothing but problems with thrustmaster but i will say there very helpful an when there products work the very good.
@@Neo_Nicodemus 40 is how many times it took to get the compound right
Hi, Will you post a vide that shows how to create a table for this database? Thank you.
I am getting an error: File "./dht11.py", line 24 continue SyntaxError: 'continue' not properly in loop
how if mysql is not on localhost , but in a online hosting ?
Just chance local host to the ip or host name of the database server and everything will work fine
Do u have to keep doing this?
Once worked for me, ain't had to in over six months.
Once only - i am now 2 years down the track and its never needed it again.
Would probably be a pretty good video if we could actually see the text on the screen.
At 720p and on a pc it's readable but I agree on a phone or at lower resolution it's worthless.
what size Allen key did you use?
4 or 6mm from memory
hai sir,,,,can you send me full tutorial on gmail? gungun470@gmail.com
if there is source code that has been written in addition in this tutorial ..? previous sorry I could not clearly see the handwriting on this tutorial .. or I may ask her python source code? I want to learn about the connection to mysql using python ..
after python sent data to mysql, to show the sensor value (output) is use php to call the data right? and is it possible if i want to use other gas? (i want to show the gas sensor value from python(RPI) to website)
I suspect the GAS sensor is simlar to the DHT being a data, negative and signal line right? if so the code is identical just rename the variable to reflect gas so as to not duplicate the DHT signal i.e sensor 1 and sensor 2.. to call the data yes you would need to use a PHP code that pulls data from the database - huge amount of resource online to help PHP from mySQL.
master i want to ask you how to connect LCD 16x2 and Sensor DHT11 in raspberry PI?
I have moved my focus more lately to the Arduino range and away from the Raspberry pi as it best suits my work so unfortunately my memory for wiring those parts is limited - I suspect the DHT 11 is 3 wire, + ground and signal, the LCD most likely 11 active wires.. 2 or 3 are grounds, 2 are + (power for LCD and wiper) 4 are data to send the data but that is as far as my help would go sorry.
Wish i could help / remember, for the last year or two now i have moved away from the Pi and use alot more Arduino equipment - wiring should be much the same for the LCD and sensor but the code would be where i would need to remember and remind my self to be of any help
Do you know why im getting this error sir? File "./AdafruitDHT.py", line 95 SyntaxError: Non-ASCII character '\xc2' in file ./AdafruitDHT.py on line 95, but no encoding declared; see www.python.org/peps/pep-0263.html for details
for me to work it took one more line after inserting the data conn.commit() after adding the data showed up in the table correctly, thx
hi there, can you send me an e-mail with some details of the used products !, i wanna use this too... thanks a lot ! johan.maljaars@gmail.com
DHT11 Sensor, breadboard, some wires & a Raspberry PI
ok, thanks a lot ! all i need now is a python script that runs and checks if there is internet connection, if yes the green led must blink, otherwise the red one ...