วีดีโอ

Nope. Just C Axis

Gonna try and get a purge mod ....

Hello David, Only time the mod or battery gets hot is if I chain vape really hard. Even then, it is not really bad. I still love this setup. HAPPY VAPING!

I have kinda moved on from the plus now. I definitely like the velocity style deck better in the plus. However, I now have the GLAZ RTA and it has a kick ass postless deck. I have so many tanks now it is hard to pick a favorite anymore. Really digging the Augvape Intake RTA right now. Single Coil with top to bottom airflow. Really Awesome flavor.

What difference does that make. #IDIOT

MrChainvapor You sir, are a NOOB and shouldn't be giving advice to novice vapers. It makes a huge difference to inform people what type of batteries are in that MOD. Btw they are dual 18650 IMr batteries that are soddered into the MOD. Attempting to re-use or replace these batteries is extremely dangerous. Also you never addressed common technical issues many vapers are experiencing with this MOD. 1. Device Auto fires constantly 2. The charging port breaks off. 3. Display screen malfunctions giving you inaccurate readings and eventually fails altogether. 4. Firing button constantly jams. Design flaws cause these issues, the batteries are soddered into the wiring, the batteries don't vent properly and juice leaks inside the shell which probably leads to chip malfunction and the charging port breaking off. But then again what do I know!!!! #Idiot

Been vaping for over 10 years. Definitely not a NOOB. I have not seen anyone try and re-use these batteries, otherwise I would have warned them not to. All I am showing is how to take the mod apart to check the switch which is the largest problem with this particular mod. If you would like to make a video explaining further, then be my guest, I am not stopping you. Battery safety is very important but this video is not about that. If people want to re-use or try to replace batteries in a $30 mod instead of buying a new one or purchasing new batteries and they hurt themselves, I consider that natural selection. Apparently, I have a little more faith in people than you do. There are a million videos on you tube explaining the proper use of mods so if someone blows themselves up, 99% of the time it is their own fault. Sounds to me like you think you are some kind of vaping GOD. I got news for you, there are a ton of people that know much more than you about vaping and vaping products. I am one of them. I don't see you making any videos on your channel, so if you are not going to try and help, how about you take a hike.

@@MrChainvapor BRAVO!!!!! BRAVO!!!!! BRAVO!!!!!! Well Said MrChainvapor! :) Well said! :) P.S. I'd like to know the name (or link) of the tool kit your wife picked up for you if at all possible. :)

@@PaulaPatioOfficial www.amazon.com/JACKYLED-45-Precision-Screwdriver-Toolkit/dp/B01EMLCYVU/ref=pd_sbs_469_t_0/137-6368046-8737532?_encoding=UTF8&pd_rd_i=B01EMLCYVU&pd_rd_r=2154d7f5-591c-44e0-ac2f-8bdc4ada909b&pd_rd_w=fJpoc&pd_rd_wg=IAgfz&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=95E1ZQ4ZX3KQJ3KYH2A2&psc=1&refRID=95E1ZQ4ZX3KQJ3KYH2A2

If you read my reply down a little further, you would see that adjustments were made and we no longer peck drill. But, since you asked I can tell you that without high pressure coolant, sometimes peck drilling is still needed on some thru coolant drills to keep them from getting too hot and increasing insert life. Especially if you do not have high pressure coolant. This particular program and tooling setup has been changed now to feature an inserted cutter for the flats and newer feeds and speeds on the drill with no pecking. Some day I may post the new cycle.

Pop Eye He is vapping plus with nipple . Damn

HA HA. Sorry, will make sure to do that next time.

Yes. Just standard pressure. This was quite awhile ago. Shortly after taking this video I adjusted the feed and speed on the drill and no longer peck drill at all. :)

mines was a p.o.s screen went out when I dropped it about 6 inches then the power down arrow stopped working and the mod got turned to 50 max still works but only at full power as it turned up and never went back down fires like it should but don't have a device that can handle 50 watt... that's been 2 years ago when that happens My ole lady's smok 40 or 45 watt screen went out and both mods where only a few months old. and where not abused

I vape them right out of the mail box. don't know what to tell you. I love their juice.

Evans Vape !!! Wrong. The guy is a complete idiot. Definitely a NOOB

@@mitchconner1727 Been vaping over 11 years. You sir are an idiot.

What kind of segelei are you using?

+MrChainvapor segelei 150

+Georgedemex make sure your post are screwed down all the way and the coils aren't touching anything. If it's still screwing up get better batteries I prefer the MXJO 3000mah 35a. Really good batteries

+brickley2000 - Your welcome. Thanks for commenting.

+OfficialJBGamer - I am very sorry about that. Unfortunately, if it won't turn on, there are only 2 things it could be. First is the button is not back in correctly, which means it will not click 5 times for off and on. The second thing it could be is when you took it apart you pulled too hard on one of the batteries or the top and disconnected one or both of the batteries from the board. If it is the latter, you will probably have to throw it away and buy a different mod. Sorry.

+OfficialJBGamer - If it won't turn on you might have broke one of the wires off the battery connections. I would junk it and buy something else. There are many decent devices out there now for pretty low cost. I know your pain as I have 2 istick 50w box mods that I loved, but I have retired them because of safety concerns. Hope that helps. Happy Vaping!! :)

This is one of those things where you have to be extremely careful when taking it apart. A friend of mine was modding his ps2 years ago and tore the ribbon cable simple because he was trying to rush through it. I modded the same model ps2 and did it without any problems and that's because I took my sweet ass time. You're better off calling it a loss with this one and keeping it for parts in case you get another50 watt istick and happen to need a firing trigger or another case/assembly for it, but beyond that there's not much u can do about it.

OfficialJBGamer I have way better advice. Buy regulated mods that don't come with internal batteries. Charge your external batteries using a quality charger e.g., Nitecore.

+Alexander Nye - Thank you for the positive comment. Yes, this wicking method has served me well on the Fogger. I now have a billow V2 and you do put the wick in the channels on that one. I love my Billow V2.

+Sootikins - You are most welcome. Thank you for the comment.

Sootikins How????!!!!

Kloque - I only do Vertical Coil builds with single coil tanks because wicking them is a PITA for me. If you can get it wicked right though, I would say verticals would perform well in this tank. Thanks for watching!

Yassir Farooq - I do not have any problems with the 0.5ohm coils. Might be the juice you are using. Some juices gunk up faster than others. In all fairness though, I do not use mine all that much. I like it, but I am partial to my Lemo for flavor.

Actually, It was not Fasttech. I know exactly what I have ordered from them, and it was only a few items because I really do not like them. Waiting forever for orders and then receiving half junk is not my idea of a good time. Usually I stick with USA vendors for my devices. I buy mostly clones, but usually from USA vendors.

My sentiment is exactly. I'd rather support US businesses. Good vid too, man. Thanks.

Actually, it was not difficult. I just wrapped the 24 gauge around the screws and pull tight with a pair of needle nose pliers. Then tighten the screws. Just have to make sure your wire (and coils) are not touching the chimney or it will short out. Still using this build today and I love it.

MrChainvapor awesome thanks

Daniel Bazan Welcome. Thanks for watching my vid.

Deleted

Yes, it is delicious!

Thanks!