วีดีโอ

Hello. I don't know if you are following the comments here now. But I will give a big thanks for a great and interesting review, very good information for a new triker like me. You are showing very good skills in electrical systems and if possible I would like to ask you a question. I got disabled after an allergic reaction from a vaccine which attacked my nerveous system. I can hardly walk a few steps with crutches, but some specialists found more strength in my legs in a laid back position with good headrest like in a recumbent trike. I have untill 30 % of my earlier strength for 15-30 minutes on my best days. I prefer some exercising instead of nothing in a regulear electric wheelchair, and I have checked out some trikes that could suit me. I understand that I probebly have to use the boost mode and lower gearing. But with all the trike manufactorers telling that they like to costumize trikes for disabled people it surpriced me that only a couple of smaller manufactorers can deliver a "wheelchair mode" with the legal max speed for a wheelchair/scooter at 15 km/h in addition to the 25 km/h with pedalassist. Such a "wheelchair mode" with a throtle is only legal for disabled people qualified for a wheelchair sign on the trike. But I heard from my fysioterapist that due to a weak point in the back and neck for most people, this is a relatively common injury for older people from different influences during their lifes. If the manufactorer had such a solution, I suppose that a trike with some pedaling had been much better and cheaper for a lot of injuried people than their very expencive only electric options. I have been told to use the walk mode to get home when my legs suddenly stop working. Electrical systems is not my area of expertise, but could it be possible either with reprogramming the walk mode from max 6 km/h to 15 km/h, or an extra control card for such a "wheelchair mode" at max 15 km/h without pedaling. I don't have the right expert words for this but it's my way of explaining this. Thanks for your great review. Best Regards Arne Gerhardsen from Norway

if you break the worn out chain on the lower side of the crank, then use a quick connect to attach/connect the new chain, and us the crank to pull the doubled chain thru all the tubes and derailleur, then you can disconnect the old chain and use that quick connect to secure the new chain.. No fishing.. :) I use the KMC (stretch proof) X9.93... that and using A.T.B. (AbsolutelyTheBest chain lube (red) and clean the chain often and apply drop on each link, I get about 3k miles per chain, and have never broke a chain. Proper maintenance is the key to longlife.. I have a BBSHD 1000k watt mid-drive. I put a small chain ring (narrow/wide 30T) to keep the motor spinning fast and cool. And never lug the motor down, (hard to do with a 350w mid-drive) Listen to how fast the motor is spinning and gear down when you hear it struggling.. that means the chain is also under enormous torque. (higher power level, lower gear is the key)

Ciao da quanti denti è la corona più piccola? Io volevo montate una 38T sul mio TSDZ2B

I realize this video is 4 years old but I have a 2010 Sprint Ice Trike & was wondering what motor did you install & did you keep the original rear cassette or change it up? Hope to hear from you. Marty

Hey man, in your other video going over your indicators people were asking for a parts list and where to buy them so that other trikers may do the same thing. Can you please post one or refer me to a place where you have posted one? I’m getting my first recumbent trike for Xmas and I’d love to put indicators on it before I start my world tour

I'm afraid it's nearly impossible to make the lights look unmodiffied on diamond frome or even two wheel recumbent if one wants to keep the weight down by attaching some IP65 5050 led strips or better ones (some manufacturers say wide beam angle is better, but narrow ones with lens or reflector should be easier to see in direct sunlight) to flexible 10mm neilon zip ties with heat shrink tube while keeping the turn signals 18cm appart at the back and 23cm at the front. Looks like the trike has some dazzling conical beam headlights which might make the turn signals hard to see. Some layered low and high beam with turn signals sitting above probably would be more visible. Is this solid state flasher relay with a buzzer or noisy electromechanical one? Isn't it possible to accidentally turn on the wrong switch since they are so close together and on top of one another? 3 pin switch and DPTS switch for hazard lights is another option.

Very lovely. Thanks. I've walked up and down Solent view rd r from gurnard marsh for 76 years. Though I live in South wesr london. Any more. Warren

use to walk there when I was 10 years old, loved it, great memories. Sure it changed a lot since then..

Thinking of adding a Bafang to the Q as it is quiet.

Not a E9

😊😊😊👍👍👍👍

@ e Trike Would you tell me please!, do I need to replace the connecting bolts, to longer ones, if I add a second chain ring forward?

did it raise your top speed ?

Я сделал четырёх колёсный веломобиль. Но практически толком не ездил потому как деференцал заднего моста МК 6, стал прокручиваться вышла каретка и подшипники из строя, стерлись сразу. Приобрёл электромотор но ещё не устанавливал его из за поломки МК 6. Кто сможет подсказать как изготовить более надёжный деференцал

Hi, could you please tell us which components did you use and also some links to where they’re available ? thanks!

Useless...3 minutes of talking about completely useless information before box even opened.. a video the world can go without.

And how can i custom this for riding to 72 km/h?

Hello, how can i reset default this display settings??

Can I install on my Hero lectro c5i

Yes, please post a parts list and links to where they’re available, I would love to adopt this for my own trike

I'd be interested in your frame mounts for the batteries. I managed to find some brackets that work on some trike frames as long as the mainframe diameter is 2 inches or less.

Good Video do fishing down there at night

Hover to Southampton that's new one to me always thought it was Portsmouth

Hi there. Thanks for the video. 👍🏻 I'm thinking about buying those Rockbros panniers for my lowrider rack which is somewhat short. Any chance you can measure how far those fixed clips are apart from each other? How many centimetres is it from the very right of the right clip to the very left of the left clip? I couldn't find any info on that anywhere on the Internet. Thank you very much! 😊

How faster is it now with it?

May I suggest covering your mic with something to prevent wind noises, unfortunately it is very hard to hear you at points. Thank you for the video though. I am thinking about getting a trike with a motor and this was quite informative.

does this display work with the Open source firmware for TSDZ2 ?? Can you confirm this? First I've heard of it..

Thank you. I'm looking forward to hearing more. I just purchased two of these displays against my better judgement, because I've always found the displays to be the weakest link in the whole system. I actually ditched the idea of LCD or LED displays and went with a simple analog display that just shows battery volume and 3 pedal assist settings and I have never had one of these fail. Instead of a display, I downloaded a GPS app for my phone called Urban Biker that works Great. Check it out . Thanks for the info. I look forward to seeing more.

Informative and helpful video. From whom did you order the motor and battery? How do I get a cable extension? I have watched the video and it seems to be a fairly easy fit but do you know the crank lengths? I ride on 155mm as I have knee and hip problems and this relieves some of the pressure on the joints. Depending on the length of the cranks in the kit, can I get shorter ones from somewhere?

I notice you have no derailier on the front, can you only change Rings manually, i have a ice adventure and im trying to set it up with a 52T and a 42T but i want to be able to change using the derailier.

LLooking at the derailier, i think the problem is the distance from the Chainrings, it is further out due to the motor, so the derailier wont extend out that far, i think a modified derailier would do the trick, i will look into it myself.

There is no need to purchase two chain rings, you only need the 52t and use the existing 42t that came with the TSDZ2, that's what i used.

Did you have to remove the entire original crankset AND bottom bracket parts before placing the TSDZ2 in? Or did you leave the bottom bracket and simply slide the TSDZ2 into that? Thanks!

How are you liking the assist and the torque sensing? Did you end up getting a derailleur to work with that double chain ring and can you please share a link for that double ring conversion if you can. I think your setup looks pretty ideal, and also uses a very affordable motor.

Cool, clean.

You said you have two batteries. Did you connect them in parallel or switch between each one.

Just a question you may help me, since you installed a TSDZ2 250w. Did you get any plug to connect the battery to the TSDZ2(blue connector).... I don't find a connection anywhere for my battery. Any help? Tx.

Nice :)... I'm doing a battery to then buy a TSDZ2. Congrats nice cycle:)

is this a 48 volt Motor? i have looked everywhere for a 48 volt but can only find the 36 volt, can you supply the link please.

It's a nice setup. I bought a FIAMM air horn. It's VERY loud and obviously much easier to install/maintain.

How has the Motor been since the install?

Hi would appreciate a review of the tongsheng motor on the ice trike, i s it harder to pedal when not using the motor i am thinking of purchasing a ice trike and the motor, thanks for sharing.

Where did You bought double chainring?

I have spent many happy hours on that beach as a kid. I have subscribed to your channel.

Can u share how to install full enclosed borealis velo cover

I see you're from the UK. I come from Germany. Since I will also install a TongSheng TSDZ2 for my mountain bike, I am interested in your experiences. How many miles have you been on the road with the trike and how has the TSDZ2 proven itself? Due to the long chainline a 2-speed chainring is no problem due to diagonal running. Since the TSDZ2 chainrings are made of steel, there should be no abrasion. What does this look like with your chainrings?

Hi Any chance of a meeting with you to talk about the motor? I am keen to add an electric motor to my mtb. I live in Gurnard but visit East Cowes often.

Cathedrals ?

This him out of Men Behaving Badly?

So clean, mine never looks that good.