- 12
- 110 131
dmitriy tsurkan
เข้าร่วมเมื่อ 4 เม.ย. 2017
Real Estate Broker.
Licensed in Oregon
This is my Channel where I will be posting videos about homes listed in Oregon. And my quick review of them.
Licensed in Oregon
This is my Channel where I will be posting videos about homes listed in Oregon. And my quick review of them.
Harbor Fright Hercules | Jackhammer Review | Unboxing
Hey you guys, so in this video, I am unboxing and using the Hercules Jack Hammer. It is a Pretty straightforward video I needed to demolish a large concrete block and it took me quite some time. However, this tool will break through a normal 4" slab with no problem. The only issue I have with it is that it is a very heavy tool and after a couple hours non stop you get tired and need breaks. I do love the fact that it has some sort of vibration control spring system in the handles and the vibration doesn't hurt your hand.
Feel free to ask me any questions. I think it's worth it.
Feel free to ask me any questions. I think it's worth it.
มุมมอง: 30 712
วีดีโอ
11-16 Ford Superduty Axle Oil Change | Front & Rear Diff | f-250 f-350 | 10.5 Sterling | How to |
มุมมอง 845ปีที่แล้ว
Hi Guys, so here is a pretty simple and somewhat rushed video of me changing out the fluids on the 2014 Ford f-350 Superduty. The work is pretty straightforward, the only issue I came across was figuring out what the correct oil was. One thing I forgot to say was because I have an electronic actuator for the rear lock then you don't need to add a friction modifier to your oil. Please subscribe,...
H&S Mini Maxx Tuner | 2011-16 Ford Powerstroke | Full DPF DEF EGR Delete | Cold Start | F250 F350
มุมมอง 48Kปีที่แล้ว
Hello, Please subscribe for reviews of the tuner and after videos of the performance. In this video, I went through the process of deleting my truck with the H&S Mini Max Tuner. This tuner kit cost me about 1200$. Unfortunately, my phone had a glitch and I lost a lot of content that I will never get back so I just went over it with another video, and so that's why I have a lot of repetitive det...
Skidsteer Bucket for Mini Excavator | Excavator Attachment | My Blade Buddy
มุมมอง 18Kปีที่แล้ว
Hi you guys, please subscribe for more. In this video, I went through the whole process of building my own custom blade attachment for my mini excavator. This project turned out great and I can't wait to use the new bucket. Please subscribe and wait for an in-use video of this bucket. This bucket can carry about 1/2 yards of materials and works really well. If you have any questions or comments...
Recent Fires In Oregon
มุมมอง 1764 ปีที่แล้ว
So what I have here are some of the most recent fires in Oregon. It's here just for you to see how things are. at the time of the recording, the fires got much worse. And according to the fire martial, they can't contain it. There are many sources now that say, the fire has been started by a certain group of people that have been causing much destruction in this country. The name of which I won...
Oddly Satisfying! Slow mudding
มุมมอง 364 ปีที่แล้ว
Hi Guys, just getting some content out there. So this is a simple video, just a quick Go-pro session. Here in the NW of Oregon, Estacada to be more precise. Also I'm just mainly showing the front tire because I liked the way the mud tires went through the mud.
Spark Plug Change Tutorial (Toyota, T100, 4Runner, Tacoma) Gone Wrong!!!
มุมมอง 4K4 ปีที่แล้ว
Hey guys, so today I needed to change my spark plugs on my Toyota T100. So I decided to change them and record how to do it. This is a Tutorial on a 1995 Toyota T100. But this is the same engine as the 4Runner of the same years, and the Tacoma as well. This should give you a good idea of how to change any of those models. Ranging from the years... 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,...
DRIVING FOR DOORDASH (HOW MUCH I MADE, TIPS AND TRICKS)
มุมมอง 734 ปีที่แล้ว
So this video should show you how much money I made delivering with DoorDash. I am comparing this with how much money I made delivering with Caviar. Like I said in my previous video, I am not exactly sure what niche I want to turn this channel into. But in the meantime, I will keep posting about stuff I know what to do. My plan is to turn this into a Financial education channel. Use this link t...
How Much Money I Made During Quarantine, Delivering With Caviar! (Uber Eats, GrubHub, DoorDash)
มุมมอง 714 ปีที่แล้ว
Hey guys!!, so in this video, I go over how much money I made delivering with Caviar Courier. Now it is not the best video. I could have changed many things to make it more fair. Like for example, I could have started way earlier. Starting at 3:30 would have been way better and would have been a more accurate representation of how much you can make. But I was working another job and couldn't le...
Winch Removes Massive Fallen Tree!!!
มุมมอง 514 ปีที่แล้ว
In this quick video, we came across a fallen tree in our way. So we pulled out the winches and moved it out of the way. Now to be honest I wanted to keep this channel only for real estate but, to be honest, I'm going to be posting a broad variety of topics for now, until I get a decent amount of followers and views. I am thinking Financial education
Dream House Tour (PDX Oregon, Happy Valley)
มุมมอง 9K4 ปีที่แล้ว
Hello TH-camrs, This is Dmitriy. Welcome to my second Home Tour. I am a Real Estate Broker Licensed in Oregon, and this house is in Clackamas Oregon which is in the Portland Metropolitan Area. I am dedicating this TH-cam channel to House Reviews and Real Estate related video topics. Please enjoy and share with your friends especially if they are looking for property in this area of Happy Valley...
What $850,000 Dollars Buys You
มุมมอง 2474 ปีที่แล้ว
Good Afternoon TH-camr's. In this video I will be going over a Home Located in Damascus, Oregon. Which is a sub-city of Portland Oregon. Now I am a Local Real Estate Broker Who is looking to expand my business. And What I decided to do is start posting videos on TH-cam of Homes listed by fellow agents. This is my first ever TH-cam video. This house is still for sale for $849,000 Dollars It is a...
Did you tune before you removed all the emission crap?
Ezlink it and be done w it
He's using the wrong bit
the point of doing a EGR delete is so your truck is not recirculating the exhaust gas the way you did it it is still recirculating. the truck just doesn't know it. the reason for premature wear and why modern diesels don't last as long is because it is basically rolling coal right into the intake
Did your fuel mileage get any better?
I am Japanese. I need your help. I removed the DPF and made it a straight pipe. I also removed the EGR coupler. Do I need a computer to write data to the vehicle using the H&S tuner? Or can I do it with just the H&S tuner?
@@上原賢治-w4c the tuner that this kit comes with does everything. You don’t need another computer
@@dmitriytsurkan8758 Thank you very much. I am very grateful. If I have any questions, I would appreciate it if you could help me.🙇🏼♂️
Excellent video, exactly what I wanted to do as well.
@@timmysrvlife I don’t use it a lot. I would change the handle where the excavator bucket grabs onto though.
Hey did it give option to tune transmission am I supposed to click yes
@@zalkhodry3674 I don’t remember anymore but yes. It’s supposed to be a complete tune and they go hand in hand. Still thriving the truck and all is wekk
@@zalkhodry3674 well
what happened with the oil leak?
I just saw a thing on HS tunes- and why you shouldn’t use them. I’m new to deisels, I have a 6.4 Powerstroke that isn’t deleted yet(not until I own it) so I’m glad I happened across that video- tells me I need to do more homework. Guaranteed, I would have been that guy
Is disconnecting the egr or putting block off plates a better idea with what you did here?
@@xlevibxxx disconnect is cheaper and easy and so far has no issues. But if you plan on doing performance upgrades having too much boost might cause issues and in that case just remove the entire system off truck
Wider chesels. Work from the edges in. Even with a chunk that large you could have busted that thing down in less than an hour.
Are you still running with the EGR not being taken out and just unplugged? I just worry about crap building up in there is all..
Still running with it unplugged
It’s a clever idea thank you
The handles on mine fell off and there is no way to fix it very cheaply made I will now have to buy a brand new one just because of the handles 😂
I am not gonna be paying this guy for working on one piece all day long and they were even speeding up the film he’s got along ways to go .
Where are those safety glasses 👓
I was thinking the same thing. Get them at Harbor Freight dirt cheap, even free sometimes.
I'm trying to check out air compressors
I see you finally learned to work the edges instead of trying to split it in the middle.
Thanks for holding the F**king Cameria Still enough to see what your doing.
Nothing like an air compressor running a jack hammer
I have used air powered hammers and an electric one or two. The 120 volt ones are nearly worthless.
Mini max with mcc software does the job nicely. I tune all my friends rigs with the mcc software on the mini maxx v1. But I agree get ez lynk. Or efi live, hp tuners. Hp and efi have great customer service still, IV never been priveledged to use ez lynk I have an 08 Cummins, but by the looks of it. I’d say ez lynk is probably the best because of the data logger you can connect to your phone, pretty handy.
خوب هست
Bought the same one. Can't wait to get my money out of it.
I bought this thing and returned it. I bought the Makita AVT and in puts this unit to shame!!!
@@walkfaster It's fine on the arms and shoulders. I used it just today to remove some old bushes. The AVT technology makes it super smooth, unlike that Hercules mess. If you buy the one from Home Depot, yes, it comes with a dolly and 3 bits.
@@walkfaster Anytime! I hope I convinced you to buy the Makita. You won't regret it. If you don't use the tool very often you could also rent it from Home Depot. I just don't want you to waste money on the Harbor Freight junk.
What you came here for is at 8:30 you’re welcome …
It looks like the handling bar gonna be a pain considering you have a thumb. Looks like it will make difficult to empty the loader bucket using the arm, because of thumb presence and this bar. I already made one bucket like you and it seems great tool to have
Good job !
bro thank you so much for the video buying my delete kit today
What a waste of f time lol
Dude. If I was you, I would fabricate a clam shell that attaches to your EX. Then lock the trigger and let the EX hold it. Cheaper than a hydro breaker and still as effective as doing it by hand. I'm going to buy one and do the same on my subcompact backhoe.
Bro thats funny!! Your defintly onto something!!! I would love to see that im sure it would work
If you're deleted why on earth do you need your obd2 port accessible ?
To scan your truck
What kind of tuner is it you don't mention it?
It was mentioned more than once
What the difference between cab chassis?
I believe cab and chassis’s have longer wheel bases different turbos and are de-tuned from the factory
@@MontanaMechanicKing "Cab and Chassis" means exactly that - A cab with no bed or tailgate. The chassis is the frame with drive train. It pronounced "chass - ee"
What type of tires you got on that truck looks great
Hola amigo mi troca no prende y le ise todo
Me puedes ayudar
You do make for a good instructor.
you’re a good man
Are you getting a p0402 engine code? I deleted my 2016 a week ago and have been getting this code.
Me to. What did u do to fix this?
Did u take off the emissions first or after
Where did you get it from and how long did it take
You mean that’s the Bosch copy jackhammer
Looks like a trailer for the Blair witch project
Drill some hole and put some gurt inside
I would make sure your program tune loads first. Then unplug a couple EGR sensors to make sure no issues. You remove all that & tune doesn't take you are stranded
Id you remove all that the truck won’t start?
you'd be better off getting a hammer for your excavator
We just used it on a jobsite and it kept sliding off to the sides that we ended using a jackhammer anyways. It was a horrible 3 days of breaking through only 8 feet of rock
How to you put it in the case
how much
I believe I paid like 600$
@@dmitriytsurkan8758 thank you
@@dmitriytsurkan8758 now that you had this for a while would you still recommend it?
@@rickyperkins232 yea, it works, the old system may glitch once in a while. Like the buttons may not always work but it usually does
Excellent video, I got inspired to do something like this myself! I'd like to see a video of it in action!
Where did you get your kit and what was the final cost? Were there any gotchas while performing the installation? My '11 6.7 is starting to throw DPF codes and after getting 2 bad sensors I'm done with the crap
Google h&s mini maxx tuner. Do some research on what you want deleted but Atleast do what I did. Also I don’t remember how much I spent.
You can take a trip to Canada and get everything
Hows this thing holding up with the 1/2 steel I’m going to make one myself
More than strong enough, but the only problem is it’s too heavy when full. The excavator can’t twist it enough to dump it. I need to redo the parts where you grab with excavator
@@dmitriytsurkan8758 I think I’m pry going to go with a slightly smaller bucket maybe a 54inch I was afraid of what your going throught not being able to dump. Thanks for the reply