วีดีโอ

I agree with you, the 90 degree design would help a lot. The connector is long but thin which makes it vulnerable to breakage easily.

It can be related to a faulty or bad ITB unit, it's a unit with a thin film with the purpose of moving the toner from the drums to the paper. That's what was wrong with my unit.

@Martin-NT i get that error all the time now. My maintenance menu says replace itb ad first suggestion... ugh I guess when these printers sit for a long time they print ok until you do a clean cycle

@@jzeman If you have a service provider I recommend calling them to diagnose the issue or contact another printer technician company.

Agreed! Landlines and IP Phones aren't going away anytime soon, especially IP Phones.

Sorry if that has confused you, I recommend you watch my previous phone system tour videos then as this series is to show the progress I've done to my home PBX.

By registering, I'm assuming you mean register your instance with Sangoma. I haven't had any issues without registering it but to install commercial modules you must register. For homelab not registering it is fine.

Cisco phones on other PBX's instead of CUCM can be infuriating. I've registered my Cisco phones on FreePBX as I have the 3PCC verison.

Unfortunately I'm not enrolled in the TandmX network so I can't do that. I do remember trying to do it once but gave up after a while.

Nope, but theoretically that could work.

Please check the comments below as somebody asked the same question.

FreePBX can be difficult to get set up if you are first starting with it. I recommend browsing the FreePBX forums and watching tutorials online. Chris from Crosstalk Solutions has an excellent series of videos on FreePBX for beginners.

You can upload a page tone through System Recordings and then set it through the Paging and Intercom tab.

@@Martin-NT thanks, i didn't know how easy that was lol

@@connorpearl9415 no problem

Well, Paging and Intercom does not work on it unless I set it into auto answer, and I've also had issues in the past where it would not place or end calls properly.

@@Martin-NT you have to put a few lines into the phones config files to get paging to work. The Polycom templates in the freepbx endpoint manger which I use for my community PBX has those but you can just add those by exporting the phones config and adding them and importing it again

@@captainchris2016 I see, thanks for letting me know. I'll look into this in the future.

To be honest, I don't really have a reason for having it named STA #, STA just stands for "station", such as station 310.

@@Martin-NTinteresting! Also just to tell you, don’t feel ashamed for being late for the 3.5 tour, take your time. ;)

@@_tylerkinney Thanks!

I do but it's mainly inactive so I don't really advertise it or use it

The 3PCC phones do not need a firmware change. For the 79XX series, I believe you need to change the firmware to SIP for FreePBX but there are plugins like SCCP Manager that you can use. I don't have much experience with 79XX series phones though.

There’s a descriptive guide on TH-cam if you search “How to convert non 3pcc Cisco phone to 3pcc”

Thanks for your feedback!

That will depends on your PBX and your configuration type. But yes, you can take this desk phone with you while travelling abroad.

@@Martin-NTpls suggest which pbx will be suitable and how to achieve this.

@@ishanaggarwal93 I recommend 3CX as it is simple to use and provision. I have a video on provisioning this phone with 3CX as well. If you provision to the cloud with their supported method, it will work anywhere with internet.

@@Martin-NT thanks for update. I guess 3cx needs sip number. But in tanzania, there only mobile or land line number. No sip provider. Can we use our existing mobile numbers in tanzania to connect to 3cx if its somehow possible?

@@ishanaggarwal93 I'm not sure, you may need to go with another service from another country

I used the 3PCC version to provision it.

did you provision it trought the web gui

@@Chrisalsersmith Yes

@@Martin-NT thanck you for telling me

No, this computer is a "mobile workstation". Designed for business usage such as CAD, spreadsheets, and other things. It does have a discreet graphics card and I do use it to game a bit, however, no it is not meant for gaming. For more information, you can watch my full video on this workstation in my channel.

İ have this laptop but this not have backlight or i can't turn on this How turn on this(?

@@SinaLotfi-hn5rg It depends on the configuration your laptop shipped out with. If you don't see the backlight icon on the F10 key, it means your keyboard was not configured with a backlight. If it does, you can press the F10 by itself or simultaneously pressing the Fn key with the F10 key to toggle the backlight.

It is, if you search up the Dual Lite LZ series you will get that model in the video.

@@Martin-NT Nope. That is a Yuyao Lixen emergency light. Dual-Lite LZs look similar, but 9 times out of 10, they are equipped with Spectron self diagnostics.

@@Martin-NT Also, Dual-Lite LZs have the indicators and test button on the right side of the unit, not on the bottom.

Alright, thanks for letting me know.

You go with any cloud provider such as Linode or DigitalOcean. 3CX also has solutions for that as well.

@@Martin-NT And there aren't much videos for freepbx anyway, can you make a tutorial for it?

@@hariranormal5584 Can you let me know what you need assistance with? I can help with installation, provisioning, and some other things.

@@Martin-NT oh, I was just curious, when I search freepbx install videos the one video from crosstalk channel is so long it's like a cert course, there just doesn't seem to be quality content where they actually show a real life example for example take these 3 IP phones, one server with freepbx installed, and linking it to a VOIP sip Number or something. Just curious

These laptops are great machines. Upgradable and repairable make them have a longer longevity than other laptops. I plan on using the precision models for the foreseeable future.

This computer can actually do more than basic computing, I've been able to run 3D modeling software, some games, a flight simulator, and more with this machine. Typing on this keyboard is good similar to other latitude and precision models, the keyboard doesn't really flex either and the travel is good for a laptop.

@@Martin-NT I see, thanks. =)

@@lloritoovidexequield.8609 No problem

My business email is not available at this time since the mailbox is not configured properly, please reach out to me on Discord instead, my tag is "linuxce".

Hey there @IntercomEnthusiasts51, thanks for the offer. I'm not too keen on these Cisco phones as I've had a rocky relationship with them in the past, however, I am interested in expanding my current "paging/public address" system, right now I only have IP Phones as my paging endpoints but I would be more than happy to check out your amplifier. Thanks for reaching out!

@@Martin-NT sounds good look at my banner for more info

Yes, you can use the intercom code *80 for the phones to auto answer. Thanks for the feedback!

In 3.5 you should add a cisco 797g i think it's called

@@Jayden-et3uc I'll consider adding new phones to the upcoming tour. Thanks for your suggestion!

Yes

Dang, I forgot all about this thread. Sorry about the eight month wait, I will try to get a video out this week so stay tuned!

@@Martin-NTcan you try to get a video out this week?

No, I got the FreePBX ISO file from their official website. I am currently running Windows Server 2019 on my server and FreePBX is a virtual machine within Hyper-V.

Yes, I got it at that price excluding shipping. I believe the printer was purchased for a business but never got used and was sitting in storage for a while. By the time I got the product, the box was a bit beat up and the styrofoam inside was broken into pieces.

well it looks like you got a very very very very good deal on this... this printer is not worth $1500 or even $1000, lol but its a very good printer @@Martin-NT

@@karmendimas5274 Yeah, if you want other options I recommend you take a look at the WorkForce Pro HC lineup or the WorkForce Pro WF-5000 series. Here's a video I posted about the WF-M5799 th-cam.com/video/5syV9QvUNdk/w-d-xo.htmlsi=dA9mHmaAzkFtfFMF

@@Martin-NT thanks I already watched that video before you made the comment have you ever looked into hp's p a g e wide series printers I've had two of them so far very impressed with them and speed

@@karmendimas5274 The only HP prints I've used were the HP LaserJet Enterprise 500, I haven't used their wide format ones yet. If I get my hands on an HP printer I'll be sure to make a video on them.

Yeah sure, here's a video I just posted of duplex printing with this device. th-cam.com/video/LKewCeQ1r60/w-d-xo.htmlsi=WTMXE9PYQDXt0BRx

thanks, thats a big help, that is fast for duplex, would you have a video on just simplex printing? @@Martin-NT

@@karmendimas5274 Sure, here is a video for that. th-cam.com/video/ygHHRYAXjYk/w-d-xo.htmlsi=80JGx1DHlTomJHfO

If you're having issues with your copier/printer, I recommend you contact a local service provider in your area that has technicians that can come out and assist you in resolving the issues with your device.

​@@Martin-NT local service provider not hep to me vacre service center and main offoce ahmedabad gujarat india

@@mukeshr2736 I see, if your printer is under warranty from Epson you can try and give them a call to see if they have any resolution options for you.

I have noticed that with the hinges. I believe you can order a replacement hinge on eBay for a few bucks if it does break and it shouldn't be too complex to repair it.

Where are the hinge screws in this laptop? Are you referring to the ones visible on the outside?

@@lloritoovidexequield.8609 Yes, the hinges are visible on the outside of the laptop and are covered by those two rectangular covers.

@@Martin-NT I had a hinge break on an old HP and it wasn't too bad to replace. For the hinge screws probably a fresh application of medium strength thread locker would probably help but I don't usually bother.

@@Martin-NT I didn't see any rectangular covers? The screws near the power outlet, etc near the back of the laptop are visible, or are we talking about internal screws?

I believe it is related to Yealink RPS.

It looks like he is using FreePBX 16.

FreePBX 16. Thanks @_tylerkinney for responding to this question!

You will have to manually provision the phone. Create an extension and input the information manually into your phones web interface. Note: I do not work with 3CX Installations anymore and I've pivoted to FreePBX. Information I give out may be outdated

@@Martin-NTI will try that. Why Freepbx over 3CX?

​@@tpzd1063 It's more flexible, it's free as there is no licensing for the base program, and it has more compatibility with other phones I have.

@@Martin-NTdo you have a video of setting up the yea link t3 series with freepbx?