วีดีโอ

I had them made for me but not sure if the guy still does them. But I’m running a btr now.

I have a lt4 hpfp and they sit higher then the lt1 pumps. This intakes don’t have the pump cut out completely the same as the lt1 manifolds

I’d do that same ones honestly but if referring to my door sil lights those are oem

Idk but I could look Into it for you.

Jeremy thanks not sure how i didn’t see this. I’ll be moving to Dallas in about a month actually. We will have to get together.

There is a second video and we don’t have the same fuel pump mines taller hence the fitment issue.

@@s3rics213 So the stock high Pressure fuel pump will clear? Yours is aftermarket?

It’s gm it’s just not the lt1 pump it’s a lt4. It’s taller cause it has a higher pressure. So a stock ss pump will clear. I’m also over 700 hp if this is the first video you’ve watched.

@@s3rics213 OK sweet bro yeah this is the 1st video I've seen on your channel I just subscribed great content bro!

@@slickrickdarula9483 thanks man and if you have any other questions don’t hesitate to ask or if you’d like to see something. I just want my car back so I can make content again haha

Thanks man.

So did you use spacers and where did you get em?

@@MrNEWIMAGE guy on fb that makes them I’d have to grab his link and send it.

facebook.com/joe.dan.79

Thanks for the help

Go here. www.michiganmotorsports.com/ls-performance-parts/ls3-map-24-sensor-extension-harness-plug-and-play-extender-3-wire-map-bosch/

The paint in this video was just engine paint but was more for a base. I finished it off with ac Delco paint that’s the same color as the car. I looks really good. I believe my other lt2 vid should show it.

@@s3rics213 thx I just watched the second one, I have the manifold in route, it’s not shaved yet was planing on doing that and seen you painted yours so huge light bulb from you

Thank you :) and hope it comes out good. Obviously do all the right paint steps and you won’t have issues. I will possible re do it later to make it pop more. Was testing the waters here. Be careful when shaving it down you could possibly go though and make little spots that can leak.

@@s3rics213 first of all thanks for your service, not prior military but I do work for the DoD, Fort Drum, NY. Yes, I was contemplating on how to get the ridges off, don’t want to poke through the top for sure.

Steady hand with a dremel lol will take a little but will be worth it. Can always hit it up with apoxy after to smooth it out. And thank you. That’s crazy I’m from that area originally lol. So beautiful.

Been working on producing better videos. Thank you and I’ve moved the cam since this.

Personally pretty reliable but depends what you want to do. You have a camaro and interested in doing mods? Or just curious, I’ve pushed this car further than what most would do comfortably without changing other stuff but bug rule of thumb is stay below 650 and You shouldn’t see a Issue. But always make sure you do everything correct and don’t skip something.

@@s3rics213 yeah I have a 2019 camaro I have 1 year with the car but so far I did a cold air intake from gm proformance and a axel back exhaust ,,,,but I want to lt2 manifold and a port my Tb and go e85 if something would break what would it be from your experience im at 38k mile at the moment?

Not because of these mods but injector fail, lifter, valve springs seem to be the things that tend to fail. I haven’t had anything fail on my end yet. Make sure you get the right tuner, assuming you have one in mind. I’ve noticed a lot of ppl over paying for the lt2 ported I’ve also seen some ppl over pay just for it to be modded.

@@s3rics213 thanks bro you really help full what city are you in do you know any good shops in la ?

@@andyherrera2045 I’m in nm and I think you many be close to gpi I’d see what they can offer you. They are one of the leaders in the 6th gen along with pray performance, and it’s hit or miss with Texas speed.

What do you mean. Like just stay in second?

Also I’m boosted so riding around in second would bog it down for the size of these course.

@@s3rics213 got it

Normally it’s disconnect I just couldn’t hear it I guess lol.

Also thank you do catching that.

Oh well haha

Just bought the lt2 mani and a ported 95mm tb Can't find seals anywhere! Btw subscribed. Nice build my guy! 👌

No problem and I ordered them through my dealership. I can see if I can find a pn in my garage for them or I can ask. I’ll post either in like 30 mins if I find my receipt or tomorrow

12639086 for the tb but I don’t know if a 95 uses the tb one cause of the amount removed. I have the stock tb. It was about $6 that included tax. 5.67 dealers cost. 12626354 for the other gaskets need 8. 2.82/22.56. Hope that helps.

I forgot I didn’t edit the pizza part which was funny to not edit it haha

y lol

because why not?

Just the answer I wanted haha

@@BenjaminKuhl 😂😂😂

@@s3rics213 Gm where can I custom order the spacer from for the intake manifold

I already started trimming mine to fit and since I was told it won’t fit I want to make it fit.

Chuck Hancock what hpfp do you have? And I have the new video ready to upgrade but my lab top won’t connect to my router for some reason so it will be uploaded tomorrow.

@@s3rics213 lt4

Do not try to trim your make it crack. Yes you can knock down the spots that come up back can’t go further.

A spacer is needed and I’ll have that info provided in the next video.

grandmaster720 yeah I have the video just need to upload it haven’t had time.

Right plus gives me a reason to make more content. I have another vid I need to upload for my new intake and mods.

Need to figure out either good mic for recording or how to mess with the settings to get it all straight forward. Thanks for the advice :)

Same and thank you. I should have this stage of it all done hopefully this week waiting on the the piece to ship out.

toggahp it’s in there just watch

Eric Pristera the 11.8@123?

Yeah. Working on figuring out the 60’

Eric Pristera I watched the vid didn’t catch it I guess

Eric Pristera how much power you making

Bryce Jordan Productions right lol

Tiago Marshall was 17. I’ll be messing with pressure but also this last weekend(last night) was messing around with different launch techniques. Also doing a burnout stationary isn’t a pain but I can do a rolling one now lol

@@s3rics213 mean car dude let's get this thing a name for its self now and yeah looked a bit "sway" but still very good turns man good stuff .

Tiago Marshall thanks man working on it but you know working with what I have right now lol

How do you like it. I didn’t want to go that big without other supporting mods right off. And are you port injected?

@@s3rics213 I haven't put it on yet. You don't need too much, I have an auxiliary fuel pump and I'm going to run meth too. It'll be good to 1000whp

@@s3rics213 if you went with the lt4 fuel system and just aux fuel pump you can run over 850whp easy.

Carnage SS that’s what I was thinking. I am running meth currently and you see a new video on. Few days possibly talking about more of what’s going on. But yeah so far the cars amazing, but there’s more to come.

Correct I was not in the car or on the scale. Also car was empty.

@@s3rics213 I was making a guess before I watched it. Approximately 10 lbs off.

Carnage SS thanks man for guessing and I figured should have said correct, blah blah lol. But that’s awesome you were close. But I believe without any mods the car would have been 3680 or so.

Thank you

Haven’t had a issue but the filter doesn’t suck anything in it. When under vacuum it just sealed and when ever in boost there’s a pvc before the can so it cant blow off the can. It’s there for gases to escape instead of lingering.

Eric Pristera thank you! :)

thanks man and yeah I didn't even get a chance to add e85, the system was maxed out on 93. I do have injectors and a pump on the way and hopefully we will see where that gets me. May also be down your way in a month or so.

Eric Pristera cool man let me know we can collab to see if we can boost your channel

Thanks man and love to see or hear the good comments. Any requests or things you want to see

i have a hero 4 for now not sure what to look into for a updated camera. Possibly hero 8, but also probly need a actual one.

Determined Veteran I didn't want to put on in the normal vent. I'd like to be around 800 or so.

Eric Pristera wow very ambitious on a LT1 you’ll need tons of work

Determined Veteran thanks again I'll need to make a trip down that way one of these days to explore.

I'll make a follow up video in a few days. Thanks for the advice.

th-cam.com/video/q4b3oRi2ix0/w-d-xo.html

david self thanks man want to wrap the back half just haven't decided a design.

Thanks couldn't go wrong in my opinion can't wait to do more.

Determined Veteran wasn't hard at all and I believe the fuses are swapped for the zl1 from what I've read.

Eric Pristera appreciate the heads up ...

Thank you and yeah I've been noticing that

always getting more and a new video will be up within the day again.

just starting out but will do once I can. thanks

Determined Veteran i know right I need a perfect world of conditions for the best results lol 🤷‍♂️

thanks man will have a few more here shortly.