วีดีโอ

Hi Adelaide, Thanks for sharing useful video, tell me router phone required Public IP or NATTED IP to talk with 3cx cloud or local IP with internet will work also.

I noticed that in the newerk application is a toggle to isolate an network and this does the same except for the gateway intself , downside is that you can not review the builtin firewall rules or the rules that are made by selecting options like the one i mentioned, is there a way via CLI to see the builtin rules , just for viewing or learnig purposes

the cable root schould be a star somewhere is the switch and form eveery AP you hace to run a cable to the point where the switch is

default the power is auto , i have read that this is the same a full power ?, and auto channel does only work when the AP is booting up is that right? i a few site i have set the 2.4 ghz to medium and the 5 ghz to high and this was a spetacular increase in performance and channel distribution and roaoming work much better

Good video , i practived with trafic rules because UBNT does like it that way, but then you can stil ping te gateways and i restriced acces to the gateway but that rule does not work , other people have the same issue and on did report this to UBNT not to be working as expected , but i get the meaning of the firewal rules but have to practice with it on my own UDM , need to isolate at a client the vlans and the gateway and that is by firewall rules as you showed , wil look at the video that teaches the firewall , still need to practice a little bit with this

What is the model of the device used?

Very helpful training guide for this device

How all of apply to IPV6? or we have to do the rules all over gain in IPV6 ?

This is the best video that I've seen explaining exactly what the firewall rules means. For us slow people. Thanks

wery a wery silent speaker, u need speak more LOUDER

Finally a good explanation on how to use the Ubiquiti design center. Been trying to find out how to use it but wasn't getting very far.

Thank you! 😍

Possible to setup local DNS records? I want to access resources from Site A to Site B without inputting the IP address at site B, but instead, accessing by device name, however Site A has no DNS records for the subnet at Site B....access works fine by IP which is AWESOME! But being able to manually create a few DNS pointers so I can type the name instead of the IP would be great!

The video was extremely useful, thank you very much. I created the guest network as described, but I can't connect to it, I don't get an IP address. How to configure the DHCP server? Or on a WAN, only one DHCP server is possible, but then how do I set up the Guest network to get an IP address?

my question is what is not being highlighted. where are all these settings are being saved and operated from?

Hey, really nice video. At 21:30 you talk about customizing the look and feel of the voucher. Could you explain where and how to do?

great stuff thx

Strange that “Group Rekey Interval” is disabled. It’s enabled by default and set to 3600 seconds on every WLAN I’ve ever created with UniFi

wheres the vlan blocking rules?

Old video now but still has same limitations. Good for cameras and office spaces that have limited cabling to space (one cable to run a PC, printer, IP Phone and anything else) BUT..... Yes, there is BUT: Don't use these for multiple WAP's when using bloody meshing. These switches have no STP/RSTP.

Shouldn't the 'All Private IP's' group at 29:57 have a subnet of /16 since the third octet needs to change? I thought with /24 you would need to list each network individually

Great video, as alway! Where does the setting "fast roaming" fit into all this? If it was mentioned, then I apologize, it must have been when one of the kids was asking something :)

One of the best Webinars i ever seen!! Amazing explanation, graphics, presentation! Keep up the excellent job!

Another great video. I learned a lot from this one.

You saved my day - explaining how to trigger the door access via DTMF at ~6:30 was a great help for me. Thank you Olaf

These video's are great. Thanks for posting these publicly for everyone.

Does that VLAN blocking rule you set up at 30:19 also block client to client traffic within it's own vlan network?

Such good information, thanks

@19.20 You say that there isn't a way to limit Bandwidth when using RADIUS, but I've done it on my UDM-Base (v2.5.17 with Controller 7.3.83) and it works just fine (with Up and Down speeds the same). I've even confirmed it with different Bandwidths applied and there's no problems at all for me.

How to setup up ubiquiti crm mailer server please

nice to see this video

Good video ❤

did have a problem logging into the LoT wifi network with an Android phone . It says identity,Amonymous identity, and password no possibility to log in to the LoT wifi via Android telfoon

Do Leader do Unifi training in Adelaide? I'd love to level up my skills

Excited for the firewall video!

You should really add all three private networks (RFC1918) to your port group "All Private IPs". That way any private IP will get blocked, not just the 192.168.n.n. IP range.

This id a really great video and goes at a pace that I think anyone can really understand. I am personally looking forward to firewall video. As that is something Ubiquiti doesn’t do a great job explaining imho.

You provide training..?

Can you disable the dhcp on this?

Will I be able to power 2 Unifi AC-Pro and 1 Unifi-HD Nano from this switch?

Can I use it to power 3 UniFi G4 Pro cameras ?