วีดีโอ

Fidia, state of the art for complex machining. Machines, CNC, drives, software and accessories integrated from a single supplier.

I can see why my teacher recommends a few years working on a mill and lathe before ever trying to program my own parts for them. 😅Some things you just got to learn from experience.

All of theese people in the video are not trained machinist or cutting machine Operator. Very very stupid mistakes. You cant hold a aluminium part with double-sided tape on a milling machine.🤦‍♂️ Some of theese "mistakes" looks like they were on purpose.

6:31 you drill i not see you stop and change direction. next tool it wrong way. again. first run mean not run it. use single block and look what is it doing. why peepol so dumb. machine only do what programmed. pragram can have error. you are just human who cant use single block or feed override on first part. fixing take longewr than you would loose time

6:02 its going. going. going. i not see anything else that STOP

5:22 big parts are... you cant run full speed facing lol its unlimited RPM if not clamp it lol

4:16 slooow feed then rapid. why rapid have to be MAX

3:36 this only can happen if run new program without single step

2:44 clearly see it just keep going. STOP you did not rapid over distance you supposed. lenght is wrong. its easy. machine has single step. feed override. screen to see how far it still go. first part is allways test. second part is full rapid if want

2:14 no reason it should be there. not click continue LOL. its okay cadcam did it

0:16 what point is cut air like it would make it cut better bcoz its too long setup lol. it flu after first touch. yup first full depth

I'd like to retrofit a old Hardinge cobra 65 lathe that has Fanuc 21t controller can I still us the old servo motors and spindle motor?

Double head VTL machine

2:16 The people in the background IMMEDIATELY stop talking as soon as that crash happens.

Mercury ?

Great content..thanks for sharing!

Every mistake has to be paid in money

love how we was all like wooooaaahh! on the fly cutter video. that fly cutter was being fed waaaay too fast. unless the video was sped up..

CMS-02 Artis solutions!

A lot of these you can hear the sound of the machining sound like the way that it shouldn't sound and you know that something's wrong with the speed and feeds or the depth but these guys keep pushing it and then they're tool breaks 🤣 Machining should never sound as violent as some of these are before the crashes or the tool breaks happen. It should usually sound pretty smooth and usually you can tell if something is off just by the sound and if that's happening you need to hit that stop button. If you don't chances are there's going to be a crash or you're going to at least break a tool. And even if you just break a tool chances are you ruined your stock while you broke that tool. The lathe crashes are so funny. I think in one of those I saw the guy do a tool change right into the stock somehow😂 Must have forgot to rapid home prior to entering that tool change or something lol. Ever since I became a machinist a couple years back I really love these videos. I know one of these days I'm going to crash. I just hope it's not as violent as some of these ones. I know some servos were definitely ruined in this video 🤣

Fmax I Love it :'D

💖💖🥺

Watching these CNC crashes made me reconsider my career choices...perhaps stand-up comedy is less stressful 😅

This video gave me such severe pain in my heart that I couldn't watch it until the end. I would rather watch a horror movie than watch this video.😱

на это больно смотреть, садизм какой то

Amasing with all these fantastic amasingly uber alles and everyone else are just some dumbasses who always makes mistakes and fuxk up machinist we got here in the comments... If you are so damn perfect and never made mistakes you are not true machinists.... Dont understand why you dont start your own shop.....if you are so good in programming and running the macines, you would be nr 1 in mo time and have a shitload of money....and would not waste your own and everyone else time here..

Most of not all of these clips are result of poor choices and poor machining practices, some of them would be even be totally avoidable had the operator been paying attention while proofing the program.

Omnissiah does not approve.

noone watches noone thinks about proper partfixture noone adjusts the speed and feeds to the clamping situation...just a pain in the ass to watch for a programmer

I’ve been a machinist for 800 years and I’ve never done anything wrong. Fuckin new guys are always scrapping parts and they can’t even read a vernier scale!

More painful to watch than BME Olympics

Single block peeps when you are running new programs and new setups.

Kind'a make glad I still have my old manual lathe. I think some of those were pretty costly.

I love that they're all recording before having proven programs. 😂

Z-666

hydraulics are strong on cnc machines .. something many forget is the centrifugal force on the claws, the faster you go the more hydraulic pressure to fix the workpiece, ,, you have to be careful with too many rmp on large workpieces and stikout

There are 2 types of machinists in the world. Those that admit they have crashed a machine and those that lie about never crashing a machine.

If you aint done one of these fopars you aint never worked a cnc

very high precision!

If you don't learn from your fault you can't improve yourself

Daniel Machado - LAF - Brazil

i would really love if you guys put the cause of fail in every situation

My wallet is being hurt

cringing while watching

High tech machine dmg Mori❤❤❤

I'm watching these from behind the sofa!

3:16 - shit, I didn't expect that, I almost jumped away from my computer 😀

Haha, look for all that noobs....

First day work

You ever have one of those days when you're absolutely convinced that the equipment hates your guts?🤬