วีดีโอ

Yes it is very close to 100% efficient

Yes I did tried akula ruslan type of device, but I did not get overunity, I am still working on that

Yes that’s right the wave looks like an AM modulated wave, the core is two black ring ferrite core up and down, good luck to you and your country Ukraine 🙏💪

How?

probably thousands of turns i didnt count, but as much as possible, because it use high turns to make high volts at the instant of switching off, i use 0.33mm wire which i think is 28AWG, and yes in the next video th-cam.com/video/QETKTKlxVnc/w-d-xo.htmlsi=_aYarPlVnqDtan33 i tried to hold the shaft and give it a friction as load and yes the current is much higher but it is lower than the short current

@@teslatechnology4371 In Newman's French Patent he details that we should measure the coils by pounds, very long wire so that the plus sign doesn't reach back to the negative sign of the input. I need to build one myself, ASAP

@@alexkoteles yeah those two coils are really heavy, i think he want to say low current hope you good luck

I sent these device to my friend in Atlanta maybe you can have a look if it is close

@teslatechnology4371 who are you buddy, you're awesome!

@@kdkinen nice to meet you,i am victor ye in china,if you have time we can have a talk on messager

@@teslatechnology4371 looking forward!

Just testing,maybe it can be used in transmission

mm ! transmission ! to sequential receivers. yes. @@teslatechnology4371

i am sorry to reply so late, somehow the system didn’t notice me of your comment, and yes you can find my fb messager in the main page of this channel

It’s using two resonant tesla coil to transmit energy, like two tuning fork

No, output is not more than input, so it is not a successful overunity device, but it demonstrated the phenomenon

Yes it was not very good efficiency

Will not reach that kind of sparks with load. Not enough speed of charging as I observed.

interesting observation, have you don some don smith things ? : )@@JB-20

​@@tvdylanYeah but maybe far different from the original scheme as Don had. I stopped because of capacitor problem. I don't have enough resources to get those bulky can type capacitors. My setup is so small using FBT as HV source, and had a small hand wound coil. Used #14gauge copper as ordinary spark gap. My setup ends at the secondary coil only, no more further experiments done due to the said problem. Caps are too expensive for me.

@@tvdylan Part 1: th-cam.com/video/YwZkCKVlPQ0/w-d-xo.html Part 2: th-cam.com/video/6eShoPYAq88/w-d-xo.html Part 3: th-cam.com/video/DcFXJCL8Sv0/w-d-xo.html Another one in the box: th-cam.com/video/EZ_u3LSyQlk/w-d-xo.html

or use a high frequency transformer maybe ! .

conversion solved 😊 60hz stable

yeah in the future video

concentrate discharge

Thanks

you mean the small red LED detector?

@@teslatechnology4371 yes. is the LED connected to a real capacitor or there is a coil inside of that part which looks like a capacitor ? thanks.

@@zpe-fighter no it is not a capacitor it is a "I" shaped inductor

@@teslatechnology4371 so it's detecting pulsed magnetic field. thanks for the clarification, I wasn't sure if it's an inductor or it's a capacitor.

unfortunately，i didnt test the output at that time

@@teslatechnology4371Thank you for your response. Did you use sine waves or square waves? It looks like a sine wave. The magnet you used looks like an Alnico magnet. Is it a neodymium magnet? I found when I put N52 Neodymium magnets, I got poor secondary output. The strong N52 magnetic force was not controlled by the primary coil magnetic force. Could you advise about this?

@@joo-sookim1016 my input is square wave push pull, output is self resonance so we get sine wave, and yes i also found that magnet seems not increasing the output voltage. but i do hear that the noise is stronger when the push pull is in the correct direction, so it shuold be more power in it, the only problem is how to get the power out. i am thinking recently that maybe we can only get good output when we matched the output impedance and the resistance of the load. i hope you can have a try. if you are interested you can add me in faacefook link in the main page to discuss more.thanks.

sorry i know it is a bad video...haha,its many years ago

same things,resonate works and your impulse also works ,actually impulse is very high frequency

@@teslatechnology4371 If you knew what you are doing you would be driving a load. You are merely charging capacitors and shorting it out. Your HV NST is what 200W powered by the grid? Drive a 200W load, surely you should be able to do that. Few know how to actually build Don Smith replications: th-cam.com/video/JXGgy6472j8/w-d-xo.html

@@XR_IX excllent video,you can add me on facebook messager if you like, LINK facebook.com/moriah.yee

@@XR_IX i suggest your red coil parallel a capacitor, and no diodes recitify , surge protecting diodes very good

@@teslatechnology4371 If you think so, you don't really understand how the circuit is working. Look at the Don Smith PDF for the picture on page 123. I can build the circuit in many ways, but it is the understanding of what actually is going on.

yes impedance matching important

Mag, there is a mechanism you are dancing around but aren't seeing the correlation. Find out why Edison hired Tesla, it's there he figured out something about current and "disruption", and he referred to spark gaps as "disrupters"

@@XR_IX do you mean collecting radiation before charges start to flow after disruptive discharge. In a condenser?

@@tinvalen5609 Simultaneously. Maybe we do have devices that can intercept flow, between charge flow and whatever that flows before. The point that is not documented is that the "whatever" creates magnetism. Tesla knew all this. Read this page (over and over) and search for the word "short". www.pbs.org/tesla/res/res_art07.html Tesla clearly states he can turn 10 watts to millions of watts. That is what we need to focus on.

hello i just got up,send setup and specs about this vedio?

thanks, i sent you some picture in messager

do you mean 200 ns diode and 5408 uf capacitor? i didnt match the impedance

@@teslatechnology4371 Uf5408 is an ultrafast diode. Reza told me you and he had a really great discussion the other night. My suggestion is to use diodes in the 100 nanosecond range. matching with a capacitor only works for a specific frequency and as soon as the cap starts to charge the matching is gone so it would be beneficial to use a zvs which i do not believe was as common as it is now.

@@Biokemist-o3k thank you,I will check about uf5408, and yeah,Reza is a very kind and generous person,hope we can work together in the future…how is your health?I heard you had an accident?

@@teslatechnology4371 Yes, thanks for asking. I was pulling out of my driveway on my 1957 Harley Panhead and a White Ford F350 caught the back of my bike and ran me over s I crashed sideways into a telephone pole. I crawled back to my driveway and somehow drove to the hospital while my crushed leg had blood clots that broke loose and went to my heart and lungs. I know I passed out several times while driving because it felt like I was Drowning.I Passed out on my way into the hospital and woke up to the surgeons prepping me for surgery. They said it was impossible that I drove myself and somehow made it to the hospital and in the front doors. It has been two years going on a third and I am able to walk pretty well but I was preparing for a classic physique body building contest and put on a hundred pounds while laid up in bed. I lost 50 so far and have another 50 to go but it should be a bit easier now that I can work out a bit. The pain is still horrible but it looks like I am in good health other than being a fat kid now...lol And try the ultrafast diodes and you will see a marked increase in power. Also turn your diodes around backwards and use a ground. search on youtube Dynatron 1750 90v 5 A and check out my friend Sergei's device.

i am sorry，what do you mean?

good idea

facebook.com/moriah.yee you can add me here if you want to contact with me .

Wow, what is happening here?

hello, reza disappeared can you contact him?

@@teslatechnology4371 no kidding. i have not talked to him or allan murray in weeks. i have no idea where they are. i will try.

@@Biokemist-o3k thank you

@@Biokemist-o3k by the way, do you know any evidence that can proof Reza is really a math teacher in New York University

@@teslatechnology4371 he told me he was a retired math teacher. i got a new phone so i am trying to locate my old phone to find his number.

Both L1 and L2 are litz wire.

@@teslatechnology4371 Thank you so much. I actually blew up the picture and kinda figured that it was high Q high frequency wire. It seems like it is single strand. You are one of the few people who know how the setup should be wired as well. Did you modify the neon sign transformer to use the pulse width modue? I am only guessing becayse it is incredibly hard to find an nst that does not have all the safety features on it. If the resonance at a certain frequency can be achieved with the capacitors, then wouldn't resonance be lost as soon as the caps start to fill?

each cap are 8000v 20nf don smith type

@@Biokemist-o3k yes I do have a SCR module at the input of neon sine transformer.I don’t like nst ,nst has low power factor

@@teslatechnology4371 Excellent. Are you an electrical engineer? It is not every day that you see someone with the correct setup.

Thank you, I think should be more than 20% but it’s very hard to test at this low power rate,Meyl’s design can’t handle high power due to the single coil design, I am think about to test the wardenclyffe tower design in relatively higher power and get a efficiency calculated.

@@teslatechnology4371 that would be An interesting experiment. Also.. if you could replace thé single wire by a connection to earth... That would have many interesting applications.

@@TwaveTechnologies yes I had thought about connecting to earth,but it will need a direct ground connection,and I don’t have a suitable location to test yet…Will test this in the future anyway

@@teslatechnology4371 Maybe use the earth connections from the mains power outlets ?

@@TwaveTechnologies wow that’s kind of dangerous,because it usually not a actual ground,and even if it is a actual ground,it always very long distance between the ground rod and the plug, a long wire can be considered as a inductance at high frequency…this will disturb the operation and calculation.

I didn’t measure and calculate.but it seems not too low efficiency

@@teslatechnology4371 thanks for letting me know

Maybe electrons in the air

Do you know sr193 ?

@@teslatechnology4371 what is s193?

generate orgone energy

I don’t know,it just seems to be overunity

@@teslatechnology4371 how can you tell?

@@filigenzilab9613 you can see the yellow led on the yellow coil changed in brightness greatly in the bottom of the two coils,I know it is not an exact measurement but I think it tells something

Well it’s ZVS--StepUp--Diode--charging capacitor--and give a spark with a coil(yellow)in series--red coil out put

This vedio I did it few years ago and now I think it doesn’t mean much

Yes very simple just a transmitter and receiver

@@teslatechnology4371 yes, that circuit diagram please

@@teslatechnology4371 what did you use to drive the transmitter?

@@filigenzilab9613 a rectified neon sine transformer typical sgtc

@@teslatechnology4371 thanks