วีดีโอ

Probably that also depends on the area. And in Hong Kong. The height restriction and also mountain is an issue for coverage.

Filter the dust that goes into your combustion chamber?

@@peter.l7010 whats different with sport then?

@@jonathanlarsson1406 sport filter probably using sponge rather than filter material in oem. Which allow more air flow into your combustion chamber. (Helps in combustion probably a little more power) Also means u will allow some small dust into your combustion chamber. If you want more power I suggest get the 350slk. Not the 200slk.

200slk only for the looks. Not really good in the hp.

@@peter.l7010 i have one haha. gonna do the stage 1 trim tho

I haven’t reach 5000m as I often lost connection around 3000m. Even at the sea level.

I will make another video explain more detail how to take it off tonight. Step by step. Taking the waste pan is easy. You will need to wash your toilet very clean before u do this change. And wear a n95 mask if u can. As it is very smelly. U know what I means. It is not from your toilet bowl. It will be from the whole building waste smells that came up from the reservoir.

Best prepare plastic bag to cover the hole before the old dismantle clean and done. And before u install the new piping.

@@peter.l7010 thank you so much! in case you don`t want to go through the whole dirty process again, which I totally understand (big sacrifice for sake of youtube viewers), would I manage to take the old connector off without moving/dismantling the toilet?

@@haninnify no it is impossible to push in the new toilet waste pan if the distance is the same as my toilet bowl. As it is the shortest flexible waste pan I can find from my hardware store. To unscrew the toilet bowl from the floor is not difficult. If you have the flush tank screw in the wall that will need a little work. But still it is worth the hassle later when u fail to install the waste pan as what happen to me. You will fill ur bathroom with the smells even though u cover the waste hole with plastic, the smells still push in a little. To ease your installation. I highly recommend you to 1.unscrew the toilet bowl from Floor. 2. dismantle flush water piping. 3.And remove toilet flush water tank screw from wall. So u can move the toilet bowl to ease the installation of waste pan. 4. And drain all water off the toilet bowl. Drain the flush tank.

@@peter.l7010 mine is similar distance from the wall as yours, thanks for the tips. it`s been leaking for 3 years but I was unable to get a plumber. it`s a holiday mountain flat. this time I came on Monday and it was already letting in also the stench from the waste area, moved the pan a bit and it`s just leaking again/no smell, but about time to fix the whole thing. the toilet is sealed with silicone on the floor but I guess I can fix that later when I got some, thanks again!

Call electrical technician if u don’t know, this is for someone with intermediate knowledge. If u search TH-cam to find solution how to change the switch. That means u want to do it your self. But for safety reason. U need to have knowledge in basic safety. Otherwise. I strongly advise call in an electrician. Thanks for your comments.

This is surely amateur video taking while I changing the switch. Thanks for your comments.

Yes. When the light is off. The on/off switch led is on.

Yes. You will need to get the correct parts number for SLK200 (R171)

Sport filter will probably have different material for their filter. And it will allow more air flow into the engine for combustion. U probably need to bring ur car to mechanic so they can tune ur car for the extra air intake vs oil burn. Otherwise u will run it too lean and risk damaging your engine.

s1gen Merc parts number A2710940204