วีดีโอ

hello i am good, you can measure the pressures from the side of the transmision as shown in the video, you can do that with the cabin on or if you want to check without installing the cabin you will have to install the steeting system without the cabin to check the system, greetings from greece

Εμβολα ναι οι μπιελες δεν παθαινουν κάτι, 4 χιλιάδες βγήκε χωρίς μαστορικα

1.Leaking Injectors: If the fuel injectors are leaking, they can allow fuel to drip into the combustion chamber even when it's not supposed to. This unburned fuel can then make its way past the piston rings and into the crankcase, mixing with the engine oil. 2.High-Pressure Fuel Pump Leak: In diesel engines, the high-pressure fuel pump is driven by the front cover and can leak fuel internally. This fuel can mix with the engine oil if there is a failure in the pump's seals or gaskets.

i agree it's a very good machine, but it just does not have enough horsepower from factory

yes indeed 👍

the original engine does not have enough horsepower for the work

@@LordTheodore04 90 PS in einem Traktor aus den 70ern ist zu wenig?

​@@stefanjurgens5832now it is 180hp

Und was hält das Getriebe davon???

​@@stefanjurgens5832no problem at all, my father build an other tractor the same way 15 years ago and it still works great

είναι πολύ καλά για τα χρόνια τους

@@LordTheodore04 κι όχι μόνο για τα χρόνια τους.... εδώ τα καινούρια χαλάνε και δε ξέρουν να τα φτιάξουν..... αυτά τουλάχιστον τα φτιάχνεις και πάνε άλλα 30++ χρόνια

how can I help you?

I have a Jandir 7710 tractor. Now I am sending you the video. It has an electrical problem

Send me the phone number so that I can send the video on WhatsApp

?

Estou com uma transmissão Powerquad comeu a Tampa vc sabe porque , e outra pergunta o que tem que observa para a montagem

​@@oficinademaquinaspesadas9399what lid are you referring too? just watch the video carefully and you will have no problem

@@LordTheodore04 ok

@@LordTheodore04 🚜

yes

Κιλκίς

thanks

thanks

very cool👍

Ανάλογα τι θέλεις από το σύστημα σου και τα χρήματα που διαθέτεις, με μια καλή κούτα παίζει πολύ όμορφα πάντως.

valve clearance 0.20mm for both, head torque is 210Nm

thanks

👍

Χρειαζόμαστε κονέ με κανένα βενζινάδικο

🤣

😉

Thank you, it took about 2-3 days, it depends if you have the parts ready

Got it thanks...any idea where I can get the parts or is it better to buy the whole rebuild kit? @@LordTheodore04

@@nicosaric1122 We bought the piston rings and bearings from our local machine shop, and the rest from john deere parts shop.

Thank you

I have never harvested rapeseed I don't know how much to adjust the machine

Όχι μπαίνει σε 1315 και πάνω, το 913 είναι μικρό.

Μου εχουν πει οτι με λιγο "κοψημο"στην καμπινα μπαινει τουρμπινα σε om 352.για om 360;

Μπραβο!πολυ καλη δουλεια!

Ναι, εγώ μιλάω για τοποθέτηση χωρίς μετατροπές

Απλα ελεγα να το ανεβασω λιγο χωρις να περαξω τα πετρελαια.ή να το βαλω τουρμπο ή αλλο μοτερ μεγαλυτερο

Everything was measured and a lot of testing took place, but in the end it is a very reliable machine.

@@LordTheodore04 Thanks you very much for your answer. I hope, you have a new project soon.

Thank you

See for yourself 😂 th-cam.com/video/sBMBvzNgo4g/w-d-xo.html

It probably is the solenoid valve that you can find on the side of the differential, you should check if it works properly.

Yeah I tried on a different model and it didn't work, very weird

@@LordTheodore04 i have a 318 and it doesnt work

Honestly I have not done any research on this, but all I know is that you push the button on the cluster and turn the key on the first position and it does the thing...

🤫🗿

Thank you

Thanks

Yes check later videos

Thanks 👍

Generally this chassis is super easy to swap any engine into. Making sure the engine is centred, you just make some mounts and connect the flywheel to the rubber piece the tractor has from factory for transferring power from the engine to the transmission.

@@LordTheodore04 Thank you!

💪💯

😉

Ευχαριστώ πολύ!

If I can I will make a video about it. I know it's a bit tricky that little box, you have to remove the upper intake manifold first, then unplug the cables and then you can remove the lower intake manifold

Also you have to remove the throttle body and about 4 bolts before removing the upper intake manifold

True thing!

Thanks

Thank you, I hope I helped. This is my first time doing such video I hope you enjoyed 🙂