วีดีโอ

No it will not turn out good,

Yes

Thank you

Yes, with the high quality PNG of the QR code you can make the print small or big, and it will still scan.

Thank you

I found them off Amazon

You’re very welcome

3M 77 and 90 sprays are both aerosol adhesives made by 3M. The main difference between the two is the bonding strength and drying time. 3M 77 spray adhesive has a moderate bonding strength and is suitable for bonding lightweight materials such as paper, cardboard, and fabric. It dries quickly, in about 15 minutes. 3M 90 spray adhesive has a strong bonding strength and is suitable for bonding heavier materials such as wood, metal, and plastic. It takes longer to dry, about 24 hours. Both sprays are clear in color, non-staining and have a low soak-in properties. They are also both repositionable for up to 5 minutes after application, and can be used in both indoor and outdoor applications. In summary, if you need a quick-drying, moderate-strength adhesive for lightweight materials, 3M 77 spray adhesive is a good choice. If you need a strong adhesive for heavy materials, 3M 90 spray adhesive would be a better option.

@@CraftFanatic2023 An excellent characterization of the products being compared. Thank you!

Thank you

I have just cleaned the air assist fan on my Glowforge printer. Turn off the machine and unplug it from the power source. Locate the air assist fan, which is located in the back of the machine. Use a soft brush or compressed air to remove any debris or dust that has accumulated on the fan blades. Clean the air intake and outlet grills with a brush or compressed air. Use a damp cloth to wipe down the fan housing and grills. Make sure the fan is dry before plugging the machine back in. Turn on the machine and test the air assist fan to make sure it is working properly. Repeat the cleaning process every 3-6 months or as needed to ensure optimal performance of the machine. It's important to note that you should not use any liquids or solvents to clean the fan as it may damage the fan or the machine. Additionally, if you find that the fan is not working properly or is making noise, it may need to be replaced. It's recommended to contact the manufacturer for assistance.

Hello, do you know how to replace the tube?

Sorry, I do not know how at the moment

Thanks!

I GOT MINE FROM HERE HERE'S THE LINK gs2awards.com/shop/ols/products/perma-pins

You are so welcome!

thank you

I believe alcohol should work, I even put it in water and scrub it with soap with a spoons.

You are very welcome, I hope it helped you in someway.

Which jig are you referring to, The coaster jig, The stopper jig or The pass-through jig ?

Brand Starbond, thin high performance

I’m glad I can help thank you very much

That’s a good idea I’m actually working on a project like that, stay connected!! it should be coming soon.

You’re very welcome I hope you enjoy it. Make sure to share the video!!!

It will still work, the corks are off of Amazon

Glad it was helpful!

Thank you very much I’m glad you found the video very helpful.

Thank you

Thank you

Thank you

Thank you very much I really appreciate it

I buy them from target

Yes, thanks

Thank you, sorry I don’t know any powder that’s holographic. But if I do come across one I will let you know.

For more details you can join me in this Facebook group I share all my settings there. facebook.com/groups/240372614059545/?ref=share

The website is your too?

It’s a group you’ll find me in with all my settings I use for all my videos.

You will find the settings in the video.

Thank you

Thank you

Thank you really appreciate your feedback.