วีดีโอ

A” Camshaft Position - Timing Over-Advanced or System Performance.. Mine is showing like this ... if i changed this it would work fine? Rarely I've misfire problems please suggest what to do

Thank you! 👍🏻

Thanks! Works the same way for my Genesis Silver A

Awesome, thank you. You saved me 225

Thank you so much !

THIS THE WRONG WAY TO OPEN THE KEY FOB! IF YOU DO THIS IT BREAKS THE SLOT THAT HOLDS THE KEY. INSTEAD PRY IN BETWEEN THE TWO TABS ON THE TOP.

What car do you have?

Nice and easy thank you

Thank you for sharing! I need to raise the temperature on mine. It looks like it’s the same model. The cord goes into the wall and can’t be reached-do you think it’s fine to leave it plugged in or is it worth calling the landlord?

Thanks!

Thank you so much! We just spent 2 hours trying to fix our problem. Had I run across your video first, we could have been done in 5 minutes!

Thanks. Your video helped!

Thank You for this info, but now I am wondering if that climate control can somehow be turned ON without A/C being turned on too? Sometimes I want to turn just blower and not A/C, but A/C turns ON always so I must turn it OFF manually.

Thanks for the cool video. I had same issues with hockey puck bush. I ended up stripping welded nut and used a Vise grip to get the bolt out. Cleaned the bolts and nut threads/ used the same with a tack weld on nut. Any recommendations how not to strip the nut?

Excellent tutorial! I have the same grill only it has annoying flat screws holding the burner tubes on. I'll be replacing mine, in lovely 72f weather!

I actually love you

It's a whole lot easier if you remove the knobs up top and unscrew the face plate . You can see everything from the top . Easy peezy 😅😅😅

Putting the key back into the channel and twisting will get it open but it will also result in breaking the housing on that side. Better to pry apart the two thick plastic tabs in the middle.

Best demonstration, very clear, thank you.

Thanks a lot - this video really helped - I happened to have a similar grill and replacement part, however, the previous owner had removed the igniter completely. This video helped to identify how the square part fits in the round hole which was not intuitively obvious. I had to remove the white ceramic igniter itself in order to bend up the tab to lock it in place. Much appreciated!

How the hell do you take for the dang glass. I’m trying to change the light bulbs lol.

Best video out there for this. thanks for sharing

What if your lift is not decompressing when installing

Great video. I have a similar model that also needs the burners. I was going to order the same ones you had ordered but they are not genuine Weber burners. Doesn’t that detract from whole Weber mystique and makes it just like any old BBQ grill?

Why not slip the pink plastic float holder shown in the video off the chain and slide it on to the chain above the float to hold it in place?

Outstanding video. Thank you Very Much.

I could totally do this myself.... Will change the tubes at the same time the plate is off. So glad I found your 2 videos. Thank you.

Would a girl be able to do this?? Also I just need to replace the pipe that goes vertical on the far left. I've had my Weber since 1999. It's 25 years old. Looked at some brand new ones today. I like my old one better.

These are a pain to close. They keep popping back up and do not want to close tightly.

Question: I replaced my harness about a year & a half ago, and since then, my Blind Spot Indicator has not been working. Are they connected?

Why don't people ever try a wire wheel on a drill?

These cans are a DISASTER in my experience. They do NOT allow you to hammer the lid back on the can, risking air leaks and paint spoilage in storage. I literally had to go out and buy aftermarket paint lids that allow access to the paint (stirring or brush use) WITHOUT ever removing the lid again to avoid this major issue. The only way the plastic lids can be reinstalled is to have ~perfectly cleaned lips and grooves on both the can rim AND the plastic lid. This was done as a cost-cutting measure, NOT a customer convenience/service! Sorry to sound negative, but this really screwed up my workflow while painting my entire home's exterior this year.

👏🏻👏🏻Update this helped my car a save me a whole lot of money an I did my self

I couldn’t get the first screw out asking for help but was able to get the rest of the screw out

I phoned Weber for parts , and he was not allowed to say it , but he said it . The new Webers don’t last as long -lol . I got mine in 2006 and it’s 2024 now ! . This will be the second purchase , flavour plates aswell. !

I will be replacing the switch out on my car car as soon as it cool down today

Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless

Mine is 18 years old. Thanks for the video. You did a great job. I’m going to fix mine now because it’s clearly worth it.

Helpful videos. Ty

I found a way to save some work if you have a cutoff wheel or hack saw. I first removed the screws holding the burner ends. Then i cut off the last 4 or 5 inches. Then i was able to easily remove the burners from the right side. I was able to slide the new burners in from the right side without removing all the mounting hardware of the nozzels. Then i just had to wiggle them back in to the nozzels.

Before installing I adjusted the airflow regulators to match the old ones. After installation the flames are yellow instead of blue. Any suggestions?

I have 3 of these in my house and some at apartments. Great Toilet. Unfortunately CostCo no longer stocks these in Maryland and Northern Virginia 😫

Did it fix the issue

I had the same model or similar, replacing an old mansfield. But it does not have a float, and now I understand why it is loud when flushing. It closes too soon and loud. I paid a plumber to install, so I don't know if there was one that came with it and he just did not know what it was for? He was honest enough to tell me of his experience. He doesn't even know how to install a shark bite water valve. Thank you for the education. I should have research this issue the first inkling, a couple years ago.

It looks like you didn’t fix it it’s still shaking than before hahaha

thanks for the great video!!!!

Thanks for doing this video. I just replaced the burners, following the video, and it works like new.

Do we need to replace key also if we only chnzge this switch? Hope key will rotate and work

Thank you so much for this video. As a single mom I very seldom ask anyone for help. ( stubborn I guess ) I feel very confident that i can change mine out now thanks to your video!!!

Your video saved me today!!! Thank you!!