วีดีโอ

Thank you for your order and support!

Thanks! The previous owner actually bought them so I got them with the vehicle, but they’re WeatherTech! Pretty sure it’s their generic fitment mats that can be trimmed to fit.

I believe you can use either, but as long as you have both fuses in the add-a-fuse (the one you remove from the port and the one provided from your lights purchase), you can pretty safely do some trial and error on what works and what won’t. The 10INJ is likely a safe bet from what we’ve seen, but we have not tried it this way. Hope this helps!

Hey Dennis, sorry to hear about the troubles. We all start somewhere with cars, so no shame there. Did you connect the black ground wire around the screw I mention in the video? It’s tucked down in there, but that’s a grounding screw. If not, that could be where things went wrong, as you really want to make sure the lights are grounded out and not attached to a random bolt that might not be grounded. That is where I would start. It could also be a bad battery - is the car brand new? Either way, I’d get the battery tested - it’s usually a free service at local automotive shops. It could be as simple as a coincidence and the battery was beginning to go bad. Since the lights were working, I really doubt the fuse situation caused any issues. You can run the add-a-fuse with only one slot filled, so that shouldn’t have caused any harm. Hope this helps.

So what did cause this problem?

Hey there, yes these are considered accent or marker lights, not for illuminating the road. We have had our inserts installed in a personal vehicle for 2 years in 115 F degree California heat with no radiator restriction or overheating noted whatsoever. That said, these do take up the top row of your grille holes, so please install at your own risk - this is stated out of an abundance of caution on our end for liability, but we can say that we’ve sold hundreds of these (as well as many other vehicles having similar installed) and there have been zero issues.

Had mine for 4 years plus and still going idk I think these are still the best bang for your buck

Yes we do!

@@revlimitdesigns How about doing a “Toyota integrated dash cam” installation video. The part numbers below are provided by Sparks Toyota, they also provided the installation guide. This should work on a 2019 or a 2020 RAV4. The Part numbers are: PT949-08210 ( dash cam ) PT949-48210 ( harness ) search = “ PT949-08210inst-venza.pdf “ to find the installation guide. The “Y” harness is used with the “windshield rain sensor” power connector.

We will definitely look into this!

Thank you please let me know I see they make one for a 1st gen Tacoma

Hi There, we would recommend returning the lights for something with a ground wire. It is odd that they didn’t include a ground wire, as it could result in a hazard to you and the vehicle electrical system.

Hi there, You can buy them directly from us through this link (set of 4 pieces): www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=shop_home_feat_1&pro=1&frs=1 We are the only manufacturer of these since it is our original idea and creation. Thank you, RLD

Hi there, You can buy them directly from us through this link (set of 4 pieces): www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=shop_home_feat_1&pro=1&frs=1 We ship to the US and Canada. Orders are processed for shipment within a few business days. Thank you, RLD

Yes, the lights are generally manufactured by companies overseas producing them in large quantities. We are a small family run business with many more costs involved, so your support is appreciated! Thanks for your order!

Hi there, we actually have another video on our channel that shows how we wired them on our vehicle.

Hi there, The inserts can be purchased here: www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=share_v3_lx

Hi there, yes they are. They can be found here: www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=share_v3_lx

Cool just placed my order, thank you

@@jovany298 thank you for your order!

Hi Mike! I never had good luck with the headlight fuse sockets for the raptor lights, so that's why I went the USB2 fuse slot route. There is something active on the headlight fuse at all times it seems, so it reduces the add-a-fuse options down to the USB fuse slots. If you'd like them to only come on with the headlights, I'd recommend splicing directly into the headlight power harness, however that is something I didn't want to tackle for our personal car. We actually prefer that the lights are on at all times while the vehicle is running now that it's set up that way.

@@revlimitdesigns ….so to have the lights on when the car running is to insert the red wire into the ubs2 then? I guess that is what I want in the first place. I will try it tomorrow to see that works, thank you for your response

@@sanjose101ful that is correct. The add-a-fuse should be connected to the USB2 fuse port for them to be on while the vehicle is running. The location in the video is using exactly that port. Hope that works out well for you!

Hi Mike, here's the direct link: www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=share_v3_lx

We will have more in stock this weekend! Listings should be up now!

You got any pictures?

Hi there, we recommend these in either color offered, but any of the same design should fit as well: Seven Sparta Led Lights 4 PCS with Fuse for 2016-2018 Aftermarket Toyota Tacoma TRD PRO Grille (Amber Shell with Amber Light) www.amazon.com/dp/B07YFN78XM/ref=cm_sw_r_apan_glt_fabc_6JE9D6N4PR1040RRF2F4?_encoding=UTF8&psc=1

Yes they should be able to be tapped into an existing wire as well. The add-a-fuse is just a simple and quick option.

Not the wiring itself, but the general idea of how they are wired: th-cam.com/video/2t6aRTHM-cw/w-d-xo.html

We recommend these of either color, but any of the same exact Tacoma TRD Pro grille style will work: Seven Sparta Led Lights 4 PCS with Fuse for 2016-2018 Aftermarket Toyota Tacoma TRD PRO Grille (Amber Shell with Amber Light) www.amazon.com/dp/B07YFN78XM/ref=cm_sw_r_apan_glt_fabc_YCX9MVVR6W5E9X2ZQBRD?_encoding=UTF8&psc=1

Yes, these will fit a 2021 Limited. That is actually what we are installing them on in the video.

Message me on Etsy with your order number and we'll get you taken care of. Sorry to hear you had issues with them, this isn't a normal characteristic of the inserts.

That's correct, these are only for the models listed in the video title.

I haven't seen where the grounding post is on the Hybrid, but I'd imagine it would be in the same spot. There may be a couple different grounding areas. You can also ground on the negative terminal, but it is best done grounding it to the body.

Hi there! The link should be linked in the description. From the link, please message us on our Etsy shop and we can let you know what coupon codes may be active. Thank you!

Hi Jesus, We restock daily between 7am and 10am Pacific time, so we will have additional units in stock tomorrow around that time. Thanks for your interest! Zach RLD

Hi there, Our shop is currently on vacation mode due to traveling. We will have them in stock late tomorrow, 7/9, upon our return. The link can be found in the video description. Thanks! Zach RLD

Hi Francisco, the link can be found in the video's description. They were unavailable last week due to us being on vacation but they are back in stock now. Thanks for your interest!

Hi Scotty, glad you like the product! Please message me on either Etsy with your Rav4World username or on Rav4World directly and I'll send you the coupon code. Thanks!

Hi Ray, unfortunately not, as the Prime grille is a different style.

I believe it should be the same as what is shown in the video. You would keep the 7.5A and add the 10A fuse.

@@revlimitdesigns hi 7.5 on top then add 10 at the bottom

Hi There, We restock daily so we should have some additional in stock each day. We generally restock a few each morning around 7-10 AM Pacific. Thanks for your interest in our shop! Zach RLD

Hey Khan, I just restocked a set. We restocked 7 this morning and they sold out very quickly unfortunately. We restock daily, so if you miss this one, we will have stock available on a daily basis. We generally restock around 8-10am Pacific time. Thanks for your interest! www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le?ref=shop_home_active_1&frs=1&crt=1

@@revlimitdesigns got it just placed the order , thank you so much.

Where do you get the lights?

@@VCBP-415 we recommend these, but any of the same Tacoma TRD Pro grille style lights should work. www.amazon.com/dp/B07YFN78XM/ref=cm_sw_r_cp_apa_glt_fabc_216ENX02197XNTHX28RE?_encoding=UTF8&psc=1

@@revlimitdesigns thank you for the quick response truly appreciate it!

We restock daily so we should have some additional in stock by tomorrow. Thanks for your interest in them!

@@revlimitdesigns Where can I buy those inserts

@@soundtech2312 you can order them here: www.etsy.com/listing/939987135/2019-rav4-raptor-light-inserts-for-le

It is shown in the video at about the 3:00 minute mark. It's the silver screw that grounds to the vehicle chassis.

I grounded it to some other screw on the chassis which was more comfortable to unscrew and its working fine.

You'll need the inserts found on my Etsy page (see video details for link) and the Raptor lights. We recommend these in either color, but any of the same style will work: www.amazon.com/dp/B07YFN78XM/ref=cm_sw_r_cp_apa_glt_fabc_6JASYNHYMZCYAQX5Z8P1?_encoding=UTF8&psc=1