วีดีโอ

Conseguiste la receta

0:45

Saludos amigo de Venezuela haz podido dar con la receta

Saludos desde Venezuela amigo ha podido dar con esta receta?

Conseguiste la receta

Amiga lograste conseguir la receta??

@@yamiltoranzosbernal7752 saludos has podido dar con la receta liquida?

Alguien consiguió la receta que me la comparta

Yah i need the recipe too..as the machine is not taking out...either that is yoo runny

Hahahahaha

and I'm still waiting... 😂🤣

I am curious if you tried frying yeast raised donut. Were you able to use the machine?You need to buy donut mix, eggs, and oil. Here is the recipe. Not my recipe, so I can't explain much more. Special doughnut flour Donut mix 1000g Egg 300g Water 400g Oil 140g Making steps: 1. Putting all material above into the Mixer. 2. Have them mixed by Mixer at low speed for 3 minutes, then at high speed for 5 minutes. 3. Take and pour the mix material from step2 into the Funnel of donut machine. 4. After these, just operate the donut machine according to the user manual. *If you have any question for the powder you mix to shape the donut by machine, consult your baker, never make the mix too watery or too sticky. Best Oil Level 25L

I have the same machine .if u have the recipe of donute please give it to me ..thx

it cost 2,499.99

Victor Mendoza about $860 on amazon

Hi

Peter Dixon I’m having the same issue

I use Archer Daniels Midland (ADM) "Golden Tex" donut mix - makes great donuts.

@@wanderings605 will that mix work for mini donuts too? I've also heard lil orbits is a good mix. The machines seem to work a lot better too (and more expensive).

​@@L.J.01 - Hiya! Not sure about any donut mix but ADM. I've heard different things about their mix, but without personal experience, I'll leave it alone. :-) These donut machines in the video above are basically larger clone versions of the Lil Orbits machines, and have the same basic drawbacks - mainly that you have to watch them a lot to make sure they continue to create the correct donuts - they tend to need a lot of handwork to keep them consistent. I tried making Mini Donuts with this machine and found that the oil tank is actually too wide! There is so much space that the mini donuts wander around in the area and it becomes very difficult to tell which ones are done and to what degree. I'd been experimenting with some sort of divider or narrowing device that would make it more possible to make mini-donuts. As it is, even though they ship the mini-size cutter with the machine, I was not able to get a satisfactory quantity out of the machine for anything but the medium donut. And then I bit the bullet and bought a Belshaw, which DOES run perfectly fine with no operator intervention, so I can concentrate on icing, sugaring and the like without having to constantly watch over the making process. Buy a used Belshaw MarkII and you'll never look back. Expensive, but worth it. In my opinion, of course.

@@wanderings605 thank you for the advice! Very kind of you. 😊

Има няколко оферти в olx.