วีดีโอ

@@AdJohns811 no problem 😉

@@VoyazopoulosJean-Louis you can run your ELRS RX on sbus and buy a radiolink Byme -A and plug into your plane. It’s a gyro that can be switched on and off via the radio

Super amazing when you can get it to fly haha 😂

Thanks for watching

Glad I could save you some money. They wanted $1500 to replace my rear window so I took it upon myself

1 and 1/2 inches from leading edge of the wing

Not really that fast but is efficient

Absolutely but I would say it’s definitely a better flying experience 🎉

This video is 7 months old. Did he have one faster 8 months ago 😂

@dronepilot260rc no, 11 months ago 😅

@@trumblez lol link 🔗

@@dronepilot260rc is is that hard to search for a name in yt?? Just search for woo fpv and in a video he did 11 months ago he flew faster than you

@@dronepilot260rc just search for woo fpv and then look at his video from 11 months or maybe its 1 year ago, he does 245kph there

@@Always_Bored96 I noticed the prices have come down

I’ve never tried to run 2 cameras. Not sure it has the capabilities to do so

@@BeachbumfromBrick Runcam tv-out cable on Amazon

@@dronepilot260rc sick I’ll check that out thanks. ☕️ if anyone gets a *Bonus for referring a product such as I’m about to buy… so, yeah today is a good time .. not 💯% if RunCam is my best quality/budget cam? Suggestions? Is that all around Best option*? I’m gonna look more into it. But, nothing beats actual run cam owners.. like you .. Would you pick another setup if had the option? Is what I’m asking …

It’s a great flier for sure 👍

I’ve tried the autolaunch but prefer to launch and land manually 😂

@@3v1Bunny I’m in the rust belt haha 😆

No it can’t unfortunately

@@federico1414 I believe it was a 2306.5 1900kv motor

Not much going on behind the scenes . I label everything I’m doing.

They wanted $1,100 from me lol and I said no, they kept calling and I said I replaced it already for $150 haha 😂

Thanks for coming lol 😂

@@racem558 no issues with mine

@@brandone9811 it was the clutch

@@kylecarnahan6688 cruise was between 2-4 Amps depending on wind direction

@@larikmezey3924 I find myself enjoying gliders more than any other style of plane

I laminated with 5 mil laminate. I also had to epoxy the motor mount on. Had to cut reliefs in the front and rear canopies otherwise they come off . I also used servo arms screwed into the foam to lock down the front and rear canopies

@@clayturney I use the radiomaster RP1 I believe I’ll have to double check

I love gliders, I used to be all about jets and high speed planes but now I find myself relaxing with a glider flight 😎 anything 1.6M and up will be a good glider to get

@@JTVlogs.247 Stock 2212-1400kv motor with 8X5 or something else?

@@Racoon1008 you can run a 8x5 folding prop on the stock motor on 3s with no issues

@@dronepilot260rc Great, I was thinking of doing a static test to see how much the motor would heat up with 8-9 inch props on 3S, but if 8X5 is good Im gonna order one.

@@Racoon1008 9” might be pushing it but it will without a doubt do 8x5 on 3s without cooking the motor

Insta360 X3

Ali express 5010 750 kv

@@MelodylaneLou that’s correct with 8x5 folding prop

@@MelodylaneLou you can run the stock motor with a 8x5 folding prop and 3s

I swapped out the anemic 2S motor for a Dualsky 3036EG. Has the same mounting hole spacing and therefore fits the plastic motor holder that came with the original setup. But importantly has a 5mm shaft which has more stiffness than the smaller diameter shafts. That said, I did need to reinforce the firewall. I cut a piece of 1mm carbon fibre plate to the same profile as the firewall and glued that on the outside. On the inside I applied a layer of slow setting epoxy glue to the firewall and the first 10 mm of sides back from the firewall. The final result is close to perfect and the better motor supplies a highly enthusiastic climb rate 😀

The Arrows 50MM isn’t bad and can run 4s

Yessir the future of warfare

It’s in the video so if someone watches they’ll know 😝

I really enjoy the Phoenix S 1600, it’s definitely a bang for your buck aircraft 😎

Fiberglassing takes 12 hours so no lol 😂

I put a smaller prop on 8x5 but yeah the motor does come down hot. Thought about drilling a hole in the canopy to get a bit more airflow through the fuselage

This is very easy to fly and I feel it is beginner friendly. It’s kinda underpowered on 2s but you can run 8x5 Gemfan folding props on 3s with the stock pnp motor and it’s efficient and enjoyable

@@dronepilot260rc thanks for the tips. In the beginning it being kinda underpowered is fine and once I get better at it I will switch out the prop and battery. How does it respond if you only change the battery?

As long as the cg is good it flies well but I find it hard to get the cg on 2s . 3s with the stock pnp prop will cook the motor for sure

I run mine on a 2s2p 3000mah 18650 pack, flys forever but yeah it's underpowered, I think a 7 second autolaunch gets me about 40m altitude 😂

Can you place a link for the prop you’re talking about? I’m also thinking of putting my spectrum motor and ESC from my Conscendo Evo in there. Then I know it’ll fly 3 s

Yessir deployed evasive maneuvering

I can’t wait to really stretch this thing out for sure. I think I’m gonna run some higher pitched 7” props and see if I raise efficiency or not 🍻

It makes flying in 20 mph wind gust easy , I flew my Phoenix S 1600 with the stock motor and it struggled against the wind haha 😆

Yessir the Goblin covers ground quickly. Added a little drag by having the air unit on top but didn’t want to risk overheating it