วีดีโอ

As noted in the disclaimer of the Description field, this is an automated scripted upload sequence. Every print I make on my P1S is automatically uploaded to TH-cam so the community can use it for Remixing. Challenged myself to automate this process so no human interaction is needed anymore for this task. When I have more spare time I indeed want to make full build vids.

Oh darn my description script made a mistake by the looks of it... Updated it so get the STL!

As noted, this is an automated script that uploads all time-lapses towards TH-cam in my Remix playlist so the community can use the footage. This does not feature any results "yet" since it's very time-consuming and as a father of 2, it's sometimes tricky haha! Cheers for passing by!

@@jenspetersen5865 The disclaimer part in my description will explain it all. Fully automated scripts uploading it to TH-cam to be used by the Community via remixing. Misses wanted a switch dock case she wanted to paint.

What I love is that it's enclosed and the space required especially if you have an AMS unit that stacks on top saves space! Cons, the screen / basic user interface, it can be loud but don't find that a con, some repairs are very intensive to do but very very good documentation!

@@Pitcon yeah, support let loose haha but it turned out it was perfect hole on the print to have the misses her Ponytail out of the hole! 👍

Yeah, when I have some more spare time I'll make edited videos of some of the results. This is a fully automated script and uploads it to TH-cam!

Yeah, for me, it actually came out perfect. Haha, the misses ponytail can now pass through the slot! I fixed it by adding a thicker support, and I forgot to select Cubic infill to reduce collisions.

@@odian-development I'll try out Cubic for my next print. I have been using Gyroid

@@Rubikscubelord-n2d think ot was about 20 minutes in! When I walked by I did hear something weird haha!

@@Jack-h2m the misses loves it too, already printing my forth for friends and family!

@@AhmedAlJafar-h3z it's the original 720p camera. The small LED inside your printer is not strong enough. In the photographic world we say, if you don't have the right light, make your own light!

@@Inventiveness_ yup, as noted in the description this is automated by scripts and uploads any timelapse also small prints. At each layer it makes a photo so yeah... If you have barely any layers the timelapse will be short hehe! But thanks for the feedback!

@@odian-development yeah but the outro should be shorter when the timelapse is short

@@Inventiveness_ yeah fully agree, working on a smaller outro already but still not finished... Need more than 24h in a day... Working full time 2 kids, 2 dogs, 4 aquariums can't find the time haha😅

@@odian-developmenthaha so its just you doing this?

​@@Inventiveness_ Ofc! It's my hobby and I would like to keep it that way! My content is available for remixing (at least this playlist) but this is just me returning a favour.

Often yes, when I start to lose adhesion I first clean it with IPA when it dried up I do a good old scrub with good old dish washing soap. Let it dry and this solves 90% of the cases. The other 10% is often incorrect infill or wet filament!

Often yes, when I start to lose adhesion I first clean it with IPA when it dried up I do a good old scrub with good old dish washing soap. Let it dry and this solves 90% of the cases. The other 10% is often incorrect infill or wet filament!

@@odian-development so weird I never considered cleaning the bed because “it looked clean” 😂. Started washing with soap and water whenever I touched it and my prints work like 90% of the time now

@@VadersFirst awesome good to hear, also consider using cubic infill reducing collisions with infill etc. and there are a few more tricks you can use to improve adhesion!

I've given that a try but it really degrades the video quality.... So yeah prefer quality over duration tbh!

Yeah fully automated process so also small prints get uploaded. The python script looks at the full length of the video, adds the music and then lastly adds the outro. It then uploads it to TH-cam.

@@odian-development Ok, i dont wanna help you with that, but i cant let the idea go out of my ADHD brain, so basicall, let your script analyze the video time and if original time like <50% of your outrotime, let it slow down the video to 25%. If its <75% of your outrotime, 50%. If its betwenn >75%&<125% of your outrotime, 75%. If its <30% Outrotime, dont upload it at all. For continuity i would advice you to just let all videos be slown down to 25%, so it looks like more, and just cut down your Outro to 5 Seconds+5 Seconds Outrocard. And use the option for smoother frames, where the Bambu takes the printhead to the wiper and than take the picture. Its takes a few minutes more per print, but it looks smoother. One good deed a day and the lord will love you a bit more they said... Not sure if this counts though.

@@Sena121 Cheers for the feedback, and I'll have a look since slowing down the video does lose me some quality... but if it does work out better for the viewers then I'm more than fine with that! I'll see if I have some spare time and maybe create the good old Outros where you get the "Lovely" subscribe button with a few videos featured and then indeed for like 5 seconds! In my opinion.... if more people should do small deeds like this... the world would be a better place! Thanks again!

Yeah, that's what you get when it's automatically scripted via Python and uploads all .avi files haha, adds the audio + outro and uploads it to TH-cam. So yeah short clips also get uploaded!

Thanks for asking, I scaled up the X1 - P1 glass Lid Riser in height (available on MakerWorld), removed one of the spars in the middle and back of the print so I could slide in 2 Monitor LED Lamps (the ones used to light up your desk) and used the M3 tape of the Monitor Lamps to secure everything correctly to the print. These are powered by USB which is very handy and does not take much space.

Just tested this for you, sadly enough at 100% scale this won't fit, to make sure that stl fits in height you need to scale the object to 85% in all axes. The screw holes are large enough to still be used correctly so you are all safe and sound if you want to print it on your A1! Enjoy!

Yeah especially with these low layer height prints it's so dam short haha... But yeah have a fully automated script that uploaded every timelapse there is present in the SD card. So also small prints get uploaded... This playlist is open for remixing for the whole community, if someone needs some footage for their videos they can use it for free... So yeah don't really care if they are short haha.

The link to the STL is noted in the video description👍 enjoy it!

Thanks, really appreciate it!

Totally agreed, as noted in the below comments this was a fully automated Python scripting, it did mistakenly add between each and every .avi extracted from the printer the outro, this should only have been added at the end of the last video haha.... Corrected the code and tested this and it's working accordingly now. Thanks for taking the time and responded to me in person since you could have chosen differently!

haha, trust me, printed this for my brothers, one of them is a GP and the other a Physiotherapist.. They use it a lot haha!

@@odian-development oh yeah, that's a good point and very fitting :D

Fine, it’s a pencil holder then…

Trust me, just because you or the people around don’t use them anymore doesn’t mean no one is. I’m in a university with over 50k students and believe me, we all have at least one pen. It would be stupid not to

I get your point! The thing is, this is fully automated with Python scripting. I only need to upload the video, paste the Description, schedule it and done. The music is purely selected due to the fact that it's royalty-free music so I can't get copyright issues and I was challenging myself with this in the code! The main goal is for this to be used by Content created as shown in the playlist description free to be remixed by the community.

It's PLA, but skipped maintenance.... Thinking it was not a dirty plate... Well here is the result! Good old dish soap, good scrub with IPA and as good as new!

Yeah skipped the maintanance part... then you get this, good old scrub with Dishwash + a scrub with IPA and works as it's back from the Factory again!

Yeah... Skipped maintenance.... So yeah this is the result... IPA Scrubbing, good old dish washing soap and it's all smexy again!

Yeah I gave it as a present to our neighbors oldest she turned 14 and loved it too!

Yeah skipped maintenance for to long! Gave it a nice scrub with IPA and good old soap!

I have to agree, I'm really happy with the performance this far! Used to Prusa printers! But this one with all of the support the app / slicer / wiki provides is really nicely done!

Yeah, this printer can do a good job at it due to the good cooling! Plus the gabs are purely functional and do not require any printe pieces to be fitted in, so I have minimal sagging what is no big deal at all.

Thanks for your comment, I will but this takes a lot of time to edit and this is a raw upload for everyone to remix, sadly with 2 young kids, misses, 2 dogs and 5 aquariums time is limited, but I'm soon going to upload resulting videos too to my channel!

For some of the smaller timelapse videos the outro is indeed longer then the timelapse 🤣 I've created nearly a fully automated process of this so yeah even the short timelapse videos get the outro too haha! Everyone is allowed to use these videos for their own remixing etc. so it can be reused and easily remove the outro.

Oh it will be there! This is purely the "raw" timelapse upload!

me too :/

There will be a full video, this is purely the "raw" timelapse upload! Having 2 kids, full time job etc. Takes time you see...

@@odian-development So don't upload until you have the time.

@@eabradley1108 haha can do but it's my hobby and I determine what I do 😏 don't get payed for this stuff only costs money...

They already do... only it's not called HIMARS but S400 and use this model instead xD

Yeah it sucks we've all had this happen some time...

@@odian-development What can I do to prevent it from happening? I've got a security camera on the printer and even a WiFi controlled so I can turn off the printer if I'm not home.

@@BaronFeydRautha For me the spool pooped open and got jammed... In most cases, high-quality filament is a must to prevent jams + maintenance on your hot end, a clog can always happen and the only thing to prevent that is maintenance and monitoring your prints... There are of course other factors like heat creap that you should bare in mind when for example printing PLA in a enclosed printer etc. but for your printer that's not something to check.

@@odian-development Hmmm...It was the Elegoo galaxy black pla. The first head was FILLED with plastic, got the second one and on it's first print the same thing happened. 40 bucks a pop ain't cheap. Think I've had the printer for about a month or two? So less than 100 hours of printing on the thing. I gotta get that blue troubleshooting book on Amazon before I get a third head. I know I can replace just the hot end but they are welded to the rest of the head with PLA. LOL. Thanks for the tips. My wife found some self screening or filtering nozzles but I don't think Elegoo plays nice with third party nozzles. From what I've read anyways. I'm a total newb at this.

@@BaronFeydRautha Sad to hear! What you can do is if there is still PLA on and arround your hotend heat it to 250c. Start cleaning everything with a brass cleaning brush so you don't burn yourself. On my older printers I use loads of different 3th party nozzles but yeah... don't own a Elegoo so it could of course be different!

Think support PLA is only delivered in the AMS combo models. As noted in the video description my kids got hold of a spool and managed to partly open the spool... So I was hoping it would not jam but it did haha