วีดีโอ

@cuchoq, yes, I record electric guitars all the time, no issues. Do you have active pickups? I'm using passives only.

👍

Sorry, I don't know that

They are very similar, my preference is id14, but if you like ssl more, go for it.

@@pace_of_mind thanks for your guidance. I will go with your choice . finally i oder id 14 .thank you very much ..i am going to subscribe your channel.

@@R_jazz_official congratulations with the new interface, feel free to ask questions and thanks for sub!

thanks bro

Thank you!

Hi! Hard to tell what's the issue is, I'm sending 1/2 directly to the speakers and another 1/2 from the output 3 to the sub. Maybe you could try to connect the speakers directly just to test? Another idea, the outputs of the interface are balanced (TRS), depending on your speakers you either need TRS-TRS cable, or TS-TS cable.

I think it was like $50 or even less.

That's what I do, but it's soooo much more expensive and requires a pretty complex setup, a lot of fine-tuning and weekly attention, otherwise the money goes down the drain. Short answer - you need both.

Which one would you recommend that is close to the $200 price range?

Youngtimer maybe? 🤔 I am sorry to hear that your units have had such problems. When I did my research I didn't see too many complaints about their reliability. Thanks for sharing, maybe other people will read your message before buying a unit.

@@pace_of_mind it’s a shame because the repairs are quite easy but a few resistors wattages were apparently underestimated. Other than that, they’re very well made and quite unbeatable in terms of price/quality ratio. Just be prepared to use your solder iron from time to time 😌. That prevented me from buying more expensive gear from them like the DTC but for a 300€ channel strip (used), it might also be a great occasion to get into electronics repair work if people are ready to take the leap🙂

@@dyonissiszoes3747 totally!

Thank you!

Thank you! 🙏

Thanks! I'm planning to make a video about using Suno and other ai-song generators!

The tip is not secured so you can just pull it off. After that you need to undo one screw and take the PCB part out (along with the XLR socket)

Awww, thanks!

Definitely a keeper, MKIIs are even better!

Hi! Yes, absolutely!

@@pace_of_mind tyy!

Hi! No, never had one, but most interfaces in this price range have very similar specs. Just choose based on the other features you need (e.g. MIDI vs. ADAT, number of inputs, etc.).

@babijii, thank you! Sorry, but I create videos for my music. I suggest you join the Kaiber AI discord server, there are channels where people advertise their services and you can hire someone there!

Ah interesting. Alright i'll do that... @@pace_of_mind

Since I'm a musician, I'm using many microphones for different needs. My main mic is a DIY LDC mic based on HL Pimped Alice circuit. I also own a Superlux R102, a pair of MKH 416, a pair of Behringer B1, etc. What is your use case? Maybe I can suggest something more specific.

@@pace_of_mindVlogowanie, nagrywanie w pokoju tego co pokazuje kamera na stole. Obecnie używam deity vmic d4

@@ciekaweurzadzeniadeity D4 is a great mic! I don't think you can get any better quality for €100. Try to keep it as close as possible to your mouth and maybe treat the room acoustics a bit.

Do you have your room acoustically treated? If not, get Shure SM7b.

@@pace_of_mind how can I send you my rooms pictures so you can help if this is well treated or not

@@PODCASTSHALA it's hard to judge by photos, how much echo/reverb do you have in the room?

@@pace_of_mind not much, I have created a small box in which I used many sound absorbing acoustic panels, I have a fan in my room, in night time there is no noise, (only of fans) in day time , my room-it's not acoustically well fully treated(but there is no reverb) , but I've set up some soundproof panels. At night, there's minimal external noise, but during the day, you'll hear dogs barking and children playing occasionally. There's also a fan in the room. I'm considering getting a microphone for voiceovers on my TH-cam channels and podcasts. In the future, I aim to venture into professional voiceovers. Could you advise whether a dynamic or condenser microphone would be better suited for my setup?

I would suggest to use a dynamic one, either Shure 7b or Rode Broadcaster, both are used in pro-grade productions and broadcasting so should suite your need very well

Both are great, flip a coin or choose which one you like more ecstatically.

🤝

Thank you! 🖤

Hey Rod, thanks for tuning in!

Muchísimas gracias ❤️

🫰

So true! I have also learnt that just because I know how to give up control in one situation does not mean that I will be able to do the same in other circumstances 😭.

Hey mate, thanks for dialing in! I assume you have an idea what this music video will be about? Like the story, different scenes, etc? If not, I would start with that. Similarly as I describe it in the video, do a scene-by-scene description/sketches. Then it will be a matter of filming different scenes and putting them together afterwards.

@@pace_of_mind Thank you for the reply back mate All I want is to create a video, in which the video projects a scene from a live performance on a stage with a band with backup dancers and good lightings, similar to a live performance on a stage. I can upload the video of myself lip syncing the song in front of a green or black background. Do you think the AI can create the rest for me ? I greatly appreciate your help.

Gotcha, I’m afraid I never done such thing, but it might be problemstic for you to match the light direction between your shot and the background so the overall picture will look artificial. Try to generate the background first and then film yourself with a matching lights. It won’t be easy though.

@@pace_of_mind so AI can’t match or blend in my video with the background ?

@@kishorilalkishoreda5719 not the AI-tools I know of.

Hi Ramtin! I’ve only tried low quality headphones like Apple Earbuds (40 Ohm I guess) and I didn’t notice much difference so I can’t add much. What I do know is that MBP has a circuit that adopts the RMS voltage depending on the load which might improve the sound.

Thank you! I hope the next video will be out in the next few weeks!

Thanks for tuning in!

Awesome, all the best making visuals for your tracks!

Yeah man same here 🙀

Thanks for listening!

Thanks for watching the video! Both of them are in the same price range and have similar specs. Personally, I value ADAT interface over a MIDI interface that you cab buy separately as a $10 usb dongle :-) And yes, I'm still using the ID14 mk2.

@@pace_of_mind Thanks so much!! Not on the fence any more. Very best, Greg

​@@gkillmaster thank you Greg!

Дима, спасибо! Вот такая ссылка открывается? song.link/de/i/1702845155 Fallout в заголовок добавлю!

@@pace_of_mind да, ссылка рабочая! Спасибище!

Thanks for tuning in!

try ebay, I see there are some chips listed

ok

Hi Helder, nice to meet you! I think you can get al1401 & al1402 on ebay, there are a few listings located in China.

Hi, I am sorry to hear that your ADA8000 has failed. It's hard to diagnose remotely, but I've never heard of these converters failing. My guess would be that it's a clock and/or power problem, have you checked these?

how can I do the clock test

Just with an oscilloscope, I think you can just hook up to the external world clock terminal, or find the clock circuit on the board.

🖤🖤🖤

Hey Hesam, thanks for watching the video! I think 18i8 is holding its own despite it's age. I would not change unless you have other reasons like instability or lack of features.

i suggest the great channel of @JulianKrause for a deep dive into tech specs of all kind of interfaces, also the Audient Id14 mkII .

yes, they have the same origin

Thanks for watching! Have a lovely festive season!

Hi! Not sure what do you mean?

Hey Robson, thanks for the video! I have my headphones connected to the interface all the time and almost every night I unplug the interface from my laptop to take it with me and watch movies/TH-cam. Sometimes I leave it plugged in and have never had a problem either way.

Hi Robson, that is an issue with your laptop not turning the usb ports on on power off, any usb audio interface would have this issue. However if it is a windows pc this is usually something you can turn off in your BIOS, depending on your computer so you might be able to change the settings. Mac might have a setting too

You can do that in a video editing software via a cross-dissolve effect or via overlay automation.

@@pace_of_mindoh ok thanks 🙏 have u made a video about this?

@@fineline8348 not yet, but it's a great idea!

Ouch, too bad. Probably need to make another video now.