วีดีโอ

Anyone used this template to cut an aluminum frame? Imagine you'd need a different bit to cut the aluminum. I'm considering adding a safety to the Icarus Precision Macro frame.

A few thoughts. The window cutout looks like a better design than the one from Sig Guy. You could use the FCU pin to lock in place instead of a drill bit. Never hammer on the cutting end of the drill bit.

Does anyone know if this safety template would work for the polymer 80 lower as well? Or is it just sig branded lowers?

what year is your vf3?

How can I order this template?

Any chance you have a template that works on a Polymer 80 P320 frame..? This version does not… Cheers..!

Would this work with the Wilson Combat XMacro grip modules? Thanks.

How do you shave down the shelf for the actual moving safety lever?? I just bought the template just trying to figure out the best way to cleanly shave the spots for the levers

Where do you purchase?

Past few months I havent been able to find a full p320 wilson combat module with the safety cut out. This right here just saved me the headache of finding one. Can't wait until this little piece shows up so I can remedy my problem. Thanks!

THANK YOU!!!!!

Fantastic product order/buy with confidence !

Interesting, the factory manual safety on my X-Macro will engage on an empty mag. The only condition that it will not engage is when it is de-cocked.

Do I hear a 3d printer in the background??

Are you still making this part? I couldn't find it on ebay.

Do you still have the P320 safety template? It doesn’t show up on ebay

After the manual safety install... can the slide be racked with the manual safety on?

Good video, but I just removed my safety completely.

You can buy the frames with the cut already in it. And buy the manual safety kit straight from sig.

I see no info on how to get ahold of one...please help.

LOOKING FOR SOME ADVICE These are helpful jigs for cutting the manual safety slot into a grip frame. I have done this with a P320 in the past and more recently a P365. Regarding the P365, I have a P365 XL and recently acquired a X-Macro grip frame. I used one of these jigs to cut the manual safety slots and removing a little bit of the width at the contact point of the manual safety. I put it back together and my slide stop/release will not work while there is an empty mag in the grip. It stays in the lock position, and will only release with some very aggressive manipulation while I pull the slide back. Is there some more dremel tool trimming on the grip that I need to do so that this will function properly?

This definitely helps. Thanks for the video!

How do I order the template?

Do you have a link for the FCU manual safety template?

Hello Sir, how can I order your cut out template for the 365 x macro.

Thanks, I just purchased your kit for my P365 X Macro-- too bad you don't sell the safety lever kit as well.

I want to buy one of these. Where is the link?

Thanks for all the information! :-)

Will this work on the Wilson combat grip? I want the FDE but they don’t offer it in a manual safety

I bought your kit and successfully installed a manual safety on a Sig P365 XL. One point of note, you did not make mention of the safety lock spring and detent pin installed into the manual lever. I went to the Sig Guy's TH-cam channel and found information about that. His tips proved helpful on installation, pin positioning, and lubrication of the lever. If folks just buy the safety lever and not the spring and pin, it's not going to work. Fortunately one can buy the safety parts kit.

I didn’t even use any Adapter to cut for the safety manual. Some frames come already with the manual safety lining. You can actually tell where to cut. I used a razor blade to cut and then I used the Dremel and then I I just cut until I reached the lining. Then I finished it by using 320 grit sand paper. Thing looks like it came from the factory.

excellent video and instruction!

Do you sell these jigs?

Hi, do you still make these? I emailed in January and February but haven’t heard back, I would like to place an order but need to discuss shipping

Where can I get template

Thanks I was tryna wait to purchase anymore gun mods but now because I can’t stop seeing videos about this shit im gonna have to buy one now 👍

I need one brother

What’s your username on eBay?

Very informative and a money/time saver for those of us who would otherwise drop it off at a gun shop and wait a few weeks for them to cut the grip module and install the safety. Thank you for posting this.

I would like to purchase jig. Please provide info if they are still available. Thank you.

How do you have the dremel cut only the module, but not cut into the template, causing the module cut to be excessive?

Very helpful. I’ll be doing this in the next few days on a P-365. Thank you.

Hmm what is the purpose of this if a grip module is dirt cheap with cut outs for safety? Just drop in the manual safety and slap in the FCU. Just did this yesterday and took roughly 5 minutes.

So as you mention the macro frame has a thickened side wall, this prevents the manual safety from operating smoothly and you have to thin the wall to about 1/2 to 2/3 of it's thickness

He probably had to remove the links because its against U Toobs terms of service to post links directly to pew pews. He can create a landing page to funnel traffic to and redirect them to the appropriate page to acquire said pew pew parts. I am interested in this project as well.

Can not find on Ebay, please help.

Thanks for the video. Worked perfectly on the p365 standard size and perfectly on the p365XL. However, on the X-Macro, it seems the frame is a bit thicker the the others and the manual safety does not fit inside the frame. Did you experience this or figure out a fix? And thanks for the reassembly tips !

Can't you use the factory grip just ad cut outs and purchase a sig manual safety for a 365xmacro ?

Did you actually try this with the macro? The macro frame looks thicker, and the safety doesn't seem squeeze onto the frame.

Where can I get the templates? Is it a part sold through SIG. Is it part of a kit? Or do you make the template, and sold separately? I got a standard size P-365 without a manual safety. Not one of the friends I know with a standard P-365 wants a manual safety. I have no reason to add a manual safety. I fully trust 365 without a manual safety. Just curious if it is feasible. Sometimes what I call a standard 365 is called the P-365 macro. I do not have the P-365X or P-365XL.