วีดีโอ

That is like a "locker", which is a modification to the front &/or rear axle of off road trucks. That is why they click when turning in parking lots.

Hi, recently started building a go kart of my own and your videos have been a big inspiration and guide to me so thank you for taking your time to make edit and post these videos I know it’s been a while but I hope your doing more than making go karts now.

Do you have to harden the bird beaks?

Hiya. I'm thinking of building something similar but concerned about power. You had a small 6.5hp on before this 250cc road bike. What speed did it get up to and what was your gear ratio. Cheers

Hiya. I'm thinking of building something similar but concerned about power. You have a 6.5hp. What speed did it get up to and what was your gear ratio. Cheers

I have a 125 cc go kart. There are two disc brakes in the front and one drum brake in the rear. They all use dot4 brake fluid. Suddenly the brakes went out on the go kart so I bought a new master cylinder and I bled the brakes and they’re still no brakes. Do you have any ideas? All the lines appear to be tight, so I’m quite confused.

Thanks man.!

Hey man. Cool build. I’m building something similar with the 250r engine and we have questions in the wiring. There are some elements that we aren’t sure about. Do you have a good idea of what’s needed and what isn’t? Maybe a good wiring diagram that’s better than the normal schematic?

Yooo I love GAS PEDAL GARGE!!!! Keep up the good editing!!!!

Wish I could hear you, motor sounds are loud but I cant hear your voice at all.

Total weight of buggy with you in it and final gear ratio?

Where did you get the rear cv axle setup I can’t find one anywhere

sorry, I can't hear you.

U were just talking about metal on metal contact and whatnot... Is there at least a bushing inside that center sprocket??

Hey can you do a video explaining the vacuum lines on the Carburetor?

funny🤣🤣🤣🤣

Could u give more detail as to how you attached the drive sprocket onto the axles. I understand the differential sprocket design I just fail to understand how the drive sprocket (middle sprocket with chain on it) is fixed to the axles

👍 Definitely a great idea. After reading through many of the comments it seems like many Overlook the fact that this is a inexpensive way to achieve excellent results. Although the sprockets are relatively inexpensive and likely easy to replace, curious how long they're wearing. I'm getting ready to start building a 4x4 electric Street buggy. ( yeah I can actually get it licensed if I follow a few rules) Although I could use any number of ready-made differentials, I always prefer to build my own parts. This system would work good for the back and I could still reverse using the front axle. What I had been contemplating is a ball diff. Much like you would find on some RC cars. Where you have a plate on each side of a main Drive disc. The main Drive disk has the holes in it that contain large bearings then you can control the pressure on each of the outside plates depending on how much differential lock up you want or need. And that pressure could either be controlled by a servo. It's not all that expensive or even really complicated the build. And also would be quiet with very little wear. I have been designing and building airplanes for decades. But I started building carts in the sixties. Never stop engineering and never be afraid to fail. I have a nice high Wing ultralight. ( j3 kitten). A superstol bush plane. Many one-offs on it. 16 in of travel on swing arms controlled by Fox air shocks. And the type 1 2300 has 2 AMR 500 superchargers with clutches. They work on a manifold of my own design. And feed 4 throttle bodies 1 per cylinder. This Plane can get off the ground in less than 30 ft. And the 3/4 scale all composite P-51 Mustang has a supercharged LS3. It well Cruz all-day at 318 knots per hour. And burns 21 gph on pump gas. 🤠🐂🏞️🛩️

That suspension shit is crazy lookin

Is this unbearably loud? It seems like you could churn these out for cheap if the ratchet pawls were part of waterjet cut disks, cut from spring steel. You could have several pawls on each to spread out the force, reducing the noise and wear.

So cool 😎

how long do you think that will last I see a lot of metal filings and chips laying around but either way good job using your head keep it up and you'll definitely go far

awesome job man you're on your way to being a very professional engineer you'll be working for Honda or Kawasaki or Yamaha one day. badass buggy design as well I like to build the same type of things and then destroy them while I'm ripping lol. keep up the good work you have a good head on your shoulders. 👍🏼👍🏼👍🏼🤠

Nice work on your suspension linkage! I need something like that on my Chanlgli China car! It's suspension and steering are horrendous ;-D

Thanks for the awesome video man. This worked amazing 💯💯🤙🏿.

The second I seen that intro I subscribed this looks like the video I'm looking for.

Dude... PLEASE tell me where you found those massive U joints.... thanks!

You look like Jeremy Clarkson in his P45 with that cage LOL

Looks fun man! But, this elimates reverse and will not hold up long term. Maybe build a sprocketed cylindrical diff (no pinion, ring is replaced with sprocket) with encased spider gears. Just a thought!

Nice work , looks awesome i love the desing it's clean

Nice work , looks awesome i love the desing it's clean

Thank you for simplifying something that was difficult to put together in my head. Good day

Thanks very much, The best video. This video helped me. 🤩

Your bracket that connects the shocks needs to be way stronger

Your rear suspension is going to snap so easy.....

Hey I like your go-kart I like what you're doing

Mantap bang... saya juga lgi bikin mini buggy

Sonits the opposite from bleeding a car brake? I always pumped three times, held the brake pedal down, had someone else open bleeder, close bleeder and pulp again

Nice build! What thickness and size metal tube did you use for the frame? Any regrets on the choice? Thanks!

I am thinking you probably don't have reverse on that machine. Terrific idea though. 👍

Pawl, the bird beaks are called pawls.

Is there anything inside of the pvc ?

great work sir

Sounds like your carbs need a little attention . when you revved it up it was a slow roll on the rrr's your diaphragms or something Vacuum related is going on . Or possibly your Air filters can cause that same issue ..Nice job on the build progress !

So what would it cost to have you make and ship one? Great idea and design.

the encapsulated nuy......you could use a compression style lock nut

Where did you get the universal joints Help. Can’t find any

Great job bro! Is possible to make home made go kart by watching on you tube with out automobile injenring cors?

Mantap... makasi ilmunya bang

Buen proyecto.. Para cuando el siguiente video?