วีดีโอ

How does it work now? did the drain hose in the exhaust hose work out in the long run? I would like to hear more about how you arranged that

Hello, please reply. I only use it on the pedal. The throttle button does not work. I turned it on from the settings and it did not work. I looked at the electrical tape file at the battery. Everything is fine. What is the solution? I ask for your help. The dealer from whom I bought it did not respond to me.

I bought something simular and having trouble getting it to work? The relay wires tie into the incoming hot 12v + and neutral - which is labeled IN and the outgoing wires tie into the same on the OUT +/- wires. The instructions state to hold down the relay button for one red flash the hold the bob down to get 2 red flashes which means the two are paired. Got that and when you push the bob the red light stays on the relay and push the bob again and the red light goes off. That's all great but the light I want on and of doesn't work? I believe when I hooked this up I left the light on but I'll try it again. I may have had it off the entire time?

Brilliant - I've been searching for a blue-sky thinking genius wirh the talents needed to do this rather obvious thing with any ebike(esp.folding) with an in-frame battery. Paul G

I've got a similar setup on my engine x. I too used a chopping board and a 10ah china blue. The battery sits on velcro pads attached to a neoprene rubber mat stuck to the board. There's a short clip on my channel showing the setup and later I installed a 100anp isolator switch so I could unplug it without sparking! 23ah in total and about 50-60 miles on pas 2-3. I also installed a power analyser which sits on the handlebar and I wired it in from the balancer kit up to the bar and then back down to the controller. It showed a max draw of 19amps at 960w! Easy job to do and like you I was no expert in soldering but it was fun.

Can you remove it in the fall/ winter?

Additional Information Sold As-Is; One owner; 50 amp connection; 2 slide outs; Electric awning; Electric stabilizers; Full underbelly cover; Walk-on roof with ladder access; Soft-Start devices on each air conditioner allows for both to run on 30 amp connection; Cover over bathroom vent allows vent to be open regardless of weather; The vast amount of kitchen stuff is included in sale - pots, pans, dishes, glasses, silverware, large utensils, toaster, coffee maker, etc; Roof has been washed and UV protected at least twice a year since ownership. No known leaks; Multiple fresh water and sewer hoses, along with multiple connections are included in sale; Full Trailer Cover with wheel covers, never opened box.; Hughes Autoformer PWD50 Power Watch Dog Surge Protector; RVLock V4 Keyless entry keypad; LevelMate Pro + hardwired; Furrion Vision S, 7" wireless rear camera system; Tymate Tire Pressure Monitoring System; Multiple leveling blocks; Spare Tire Cover. Negotiable Inclusions: Hensley Arrow Hitch, guaranteed zero sway; Macerator Pump with 100' hose; Blackstone Griddle.

hahaha......thanks for the video. but sausage? fried chicken? and ebikes are kinda like half in half out. i pedal-only and for cardio, and eat healthy as i can. you feel better, sleep better, look better, live longer, stay out of doctors office!!

Do you believe a lifted 2wd with a diff lock can make it?

Personally I am happy to increase range by just carrying an extra battery and not go through the complications of wiring it in line. Very interesting to see other options though.

Where is the link for this switch

I thought the higher the Voltage, the higher the speed?

Good video..... you just added another project to my list.

Thanks for your video! My GForce T42 is a similar folder and I started by upgrading my main battery to 20AH in the bike tube. My second battery will be in the rackbag. Planning on a 52V 20ah and the Sparks Blender that allows for different voltages. Your XT90S connectors looked like a good choice for hooking it all together. Did you use heat-shrink tubing over your splices or just elec tape?

Finally, gave up on that shitty little ebike and can't afford a quality ride, or is it that you just don't like doing something?

Sorry, man, but that looks like one miserable ride.

You did a very good job on your bike I'm thinking about getting me one of those bike I've been looking at them I've heard a lot of positive things about them I'm really serious about.purshing one for this summer

my man you have no idea how many yt videos i had to watch, trying to figure out what connectors my enigine pro has, i came across your video but then saw its for ep 2 pro and didnt watch it, then i was like why not watch this as well and here not expecting anything to gain, I learn the connectors are called dean connectors. one more thing i learned while watching all those youtube videos, that some of them say dual battery set up wont work with bikes that has regen any ideas on that.

Very creative Coyote e bike good 👍 job!

So I ordered a second battery (48v 13ah) for my ep-2 pro. Battery and balancer using the same plug as ep-2 pro. I hope it's easy plug and play operation :D

Nice pronunciation

Thanks for the heads up 😮

So tybe does allow ebikes or is it they allows bikes only?

AC are not built fir tye heatbwe have had. Very interestedvbut dont wabt to blow fuse. I almost out window "efficient" ac in and then they all disappeared off shelves! Thanks for your video.

She said yes!!

Great video! How far can you go now with both batteries? Also, I would like to know your seatle bag and where did you buy it at? Thanks

Functional, but kinda ugly.

Where did you set up drain hose

'Promo sm' 🤦

Can I do this setup on a 30amp travel trailer?

Preciosa

I have the same bike, I'd love to upgrade the stock controller to at least 30a for hill climbs but worried that it either reduces the range or simply won't fit in the frame like the original. So many bloody controllers to choose, most need additional pedal sensors, displays and the only one I found had a 3 pin connector to the motor, we need a 9 pin for the motor. I also found out the motor isn't actually 750w but the Bafang 350-500w version with extra current pushed through, so not a true 750w.

I got the same rack and I put some Curt LED stick on lights on Amazon for 25.00, they come with plugs all ready to go that plug into your trailer light plug. Works beautifully.

I'm suprised you still have your original fenders on, a lot of them fall off

Can we just disconnect the 2nd battery and run the bike with the frame battery only as normal if needed ? Or we need to have the two batteries running with this settup?

Great video heading down in October and this answered a lot of my questions✌️

With that second battery, is it possible to turn off the main battery and taking off the key without it turning off the bike?

Dual Battery Parallel Controller:: THIS DOES NOT WORK FOR BIKES WITH REGENERATIVE BRAKING!

im doing a duel battery mod on my bike too for longer distance ride

Why not get the same battery and just keep the spare in a bag mounted on the rack? That's what I'm going to do. No mods.

🍒

what's the name or the link to this A M A Z I N G seat? Thanks!!

Same I am wondering if it would work on an Engine Pro which has regenerative brakes but can be disabled.

whats PSI do you use on your bike? especially on those beaches

Did you have to turn off regen? I know they state to not use a battery balancer with regen brakes, but I did not know if they worked fine with the much smaller hill regen on these ENGWE's?

Nice work and a range test would of been nice too..

Need a link to what you bought?

Pier park does a good job. I use to live in that area but now im back in my hometown 30miles East, Port St Joe doing my own fireworks. New sub.

Tip: if you do early check-in and have the Disney app, you can bypass that wait. And the morning off, you'll even have your site number ready which is good in case you need to change it.

Do you think a stock 2door jeep can do it