วีดีโอ

Hey man the fz6r is my first bike I've had it for 5 years and I still can't use all the power on a track. It's a great machine and I'm sure you'll love it congrats!

How’s the bike treating you? I’m looking into a ‘13 with only 400-something miles!

Did you end up finding a tune ?

I have the same system on my fz6r and it comes with that mount to bolt to the passenger peg its a great sytems and it comes with everything you need

@@mattm.6555 where do you order that exhaust from I got a 2012

And when you take 2 and a half minutes of a 4minute video to even start it up.

64 more than before???

@@NautilusRift no way haha. 64hp total.

Brodee doesn’t stock fz6r get up to 75hp?

@@thegreatballplayer1 at the engine maybe

@@thegreatballplayer1 The general number I've heard thrown around is like 66-68 at the wheel. But I mean hey depending on the day that could vary.

Yeah, it really is just a good way to fry your valves for being too lean; unless if you and a Fuel Controller.

Same here

It's attached to the passenger footpeg; the mount sandwiches between the peg and the frame.

Im currently having the same issue

I honestly don't know. The shop ordered them. I know there were shorter or longer ones of the type they got and I told them to get the longer ones. And they didn't require any cutting. They attach right to the frame.

Mine's are No Cut Shogun Frame Sliders. Try searching that. No cut is important cause you don't want to cut your fairings.

There's a stamped circle inside the fairing, made specifically for factory sliders to fit.

@@Max-vi3ph Cutting them out is very easy right on the back of the fairing there's a tiny dot where you drill your small bit through but make sure you put painters tape on the outside of the fairing so you don't ruin it and circle cutter is only an inch and a quarter and the slider is like 2 in so it covers it up no matter what it's pretty easy though there's a DOT right there where you drill it

Just a little popping on deceleration which just has to do with the Power Commander not being Dyno'd and mapped right yet. Not annoying enough to make me want to rush to Dyno though. I'll do it when I can spare the money.

First I'm going to try having it Dyno'd. I'll ask the Dyno guy if doing the block off plates after Dynoing matters or if it should be done first.

Popping sounds sound good.

@@vegasrockets4033 Save yourself a few bucks and install the block off plates first before the dyno. It may solve your problem. I installed the plates then did some tweaking on the map and viola! No gurgling or backfire. BTW, Half-Click-Up is the man, he helped me out with my setup. Of course by now, you've gotten all this straightened out.

Thanks Paul. I believe they're Woodcraft. I don't know how hard it was because the shop did it with some other mods. They had to pull the top of the shocks up to clip the bars onto them which lowered the front. So I had them put a lowering link in the back to even it out so the geometry wasn't thrown off. It feels pretty good to me. Also the aftermarket brake and clutch levers had to be rotated up a little to clear the fairing. Not too much and it's not uncomfortable. I don't believe there's any handling difference, but I like the looks better. Ride safe! Also, I'm about to upload another video about a messed up road law that effected our family. If you could share it that'd be great. Thanks.

VegasRockets Great video. Thanks. nice bike. I have this one too is incredible. Great performance on the race track but also does great at road for short or long distances. I want to mod the bars. I just can't find the right fit. I purchased some on eBay but didn't fit well. Can you help us asking with your shop what model and size the installed on yours? Keep posting videos

Will do. Pretty sure they are Woodcraft but I'll ask them.

Thank you, we appreciate that. The victims were from all over so due to that I'm sure it's affected a lot of the country. I'm sure it'll affect tourism here for a bit though. There's already been some concerts and conventions cancel or reschedule for later. I didn't notice any performance improvements from these mods. Just improved sound. I put up another video (Check it out!) with the new full Delkevic exhaust system ($385), K&N air filter and Power Commander 5. Now I'm feeling a good power improvement, great sound and a LOT less heat coming up from the bike. Thanks for commenting and if you know of any other Las Vegas TH-camrs let me know so I can try to ride with them! Thanks! Ride safe!

Thank you. I also have on it a fender eliminator kit, clear LED tail light with integrated blinkers, flush mount front blinkers, frame sliders, clip on handlebars, shorter black clutch and brake handles, and smoke windshield with spike bolts. I put another video up a couple months ago with a couple mods I did to the airbox (a little different than other ones I've seen) and fake air intakes. I also got a couple cameras (front and rear facing) and mic to start motovlogging. With my old helmet I had serious air noise so hopefully it'll be better now. I haven't seen any other Vegas motovlogs so hopefully people will like it. And hopefully I can get into riding with others. Group rides, stunts, track days, etc.. Ride safe!

@@vegasrockets4033 do your brakes hit the head cowl while turning after having clip ons? Like to have a clip on but worried about it affecting my abilities to turn the handle without hesitation. ? Can you please advice me here. I like to get the front lowered like yours.

Very nice. Do you have a video on here of it or pics somewhere? I was wondering what I could do with the mirrors.

LOL yea those OEM rabbit ears, Yamaha put on for mirrors really are an eye sore.....buy some 2008 zx6r mirrors and they bolt right in with no problems! I've been wanting to put a video up showing my bike. Hopefully i can get to doing that soon. I do have pics of my bike i could send some to you if you like so you can see the mirrors.

How much bro in mods 7k

Thanks. The other mods I've done that I didn't mention are clip on handlebars, rear lowering link, frame sliders, fender eliminator, flush mount front blinkers and integrated LED tail light/blinkers. Ride safe!

​@@vegasrockets4033 cool and share it, if you don't mind