วีดีโอ

min is to hughe for my jobs too. But maybe at someday i get a small cnc. It is neverless a very good tool. Rewelcome.

? Wie kommen Sie darauf das es um 180° gedreht werden sollte?

@@grannsnewadventures8450 i would do it again but the arms i would make from alu. As longer as the parts are as flexible they become. Now i have a mill then i only had a 3d printer. Yes indeed a very good way of cloing a concept. But again there is a good reason why its made with alu, vibrations are severe and plastic wont deliver a long term solution. I mean it works but the long parts should be alu for sure better.

Yes but you need!!! 2 ballbearings to bear the spring between the lever. When you dont use 2 the mechanism will go hot and starts to glow from the friction heat. www.dropbox.com/scl/fo/s44altzs0pvs4puxz4zwl/h?rlkey=wsp03lf7fiah80i2iid020tnb&e=1&dl=0

Thx you for the link and the advice! I will try to make it 😊

@@Kj-bq1xg its an easy build. The rod has to be as precise as possible in diameter so that the drillbit moves not out of center when you pull it down. It works for drilling only end mills break off like spagetti because of the runout. You can drill a hole but that is thanks to the V shaped drillpoint that selfcenters it self.

yes i have 2 of them. Thy. Its a simple mechanical problem so the solution is easy.

Send us an clip here, with what you got.

I made you a clip. Checkout the new video th-cam.com/video/0fQe7wLShaU/w-d-xo.htmlsi=mjpKAj3Na1iNozHx

Yeah i saw that too. What are you interested in? As long as i dont have to take apart the whole mashine i will keep it coming.

Manual Fokus reicht mir. Wenn erDir nicht reicht mach Dir selbst ein Video. Bye bye

well i can explain how id did happen. By testing and getting some evidence. And some luck of curse, because that was a lucky shot. Well thanks for sharing your information or opinion. Well i dont know what you try to destroy with your comment about the fairytale world, maybe a denial phase until you got your proof, but anybody can do what i did and get the same result. And im 100% certain that i was not the first one who did discover this phenomenon. The split circle focus can be bought btw. I found it after i googled for an explanaiton too. www.focusingscreen.com/work/d700en.htm The splitscreen split has to be a ultra slice on the leftish part of the image for my setup that works perfect even when the splitscreen isnt 100% overlaping. I would say 98,5% overlap and it gives repeatable tacksharp images. Well thanks for the flowers im just a lucky explorer of a world with some good fairytales left to enjoy =) Go and watch this then go and buy the exact ingredients, mix the natron in the water before you add the slaked lime or the chemistry will not work. When you want to know more feel free to contact me. th-cam.com/video/znQk_yBHre4/w-d-xo.html

Well think about what engages the ziggzagg motion. And then think about what it hinders to go straight. The knob for ziggzagg does this. So ungunk the knob/switch like i explain. When that worked good when not make me a clip of the problem

Hi The bobbinshuttle has to be fixated with the needleplate. When loose: Take the needleplate of turn it and the will be a notch were the bobbinshuttle will be insertet. You have to position the bobbinshuttle lets say finger to it, pointing to the left, and the place the needleplate notch onto that finger. Screw the screws back inplace and check the movment.

I made you 2 clips. Check em out When i understood your question corecctly i assume it is this solution. th-cam.com/video/JmXK2PmVEYM/w-d-xo.html When there is another problem with the cage i assume it could be this. th-cam.com/video/Ngvs9mKJYCE/w-d-xo.html when there is another problem ask again ;)

rewelcome here to help when i can.

ja ölen ist wichtig. Entharzen wäre es auch gewesen damals ^^

oui, je ne peux vous aider qu'avec des SMS, mon français est inexistant. Prenez un peu de térébenthine, de diesel ou de térébenthine orange et versez-le dans le joint gommé. Le joint DOIT être chaud. Utilisez un sèche-cheveux ordinaire pour le réchauffer. Le problème vient généralement d’une résine protectrice injectée dans la machine pour la protéger de la rouille. Mais avant la vente, le vendeur aurait dû retirer la résine protectrice. Très peu de détaillants ont pris cela au sérieux. Ainsi, cette résine est liquéfiée avec les solvants. En combinaison avec la chaleur et le mouvement, les articulations deviennent généralement plus flexibles. Si la méthode échoue. Sortez le groupe levier du boîtier, j'ai fait une vidéo pour ça en allemand, non je ne la traduis pas en français, mais vous pouvez voir tout ce qui doit être fait dans la vidéo.

@@fearlyenrage merci je vais essayer 👍 votre vidéo est top 👍👍

No they are made in a gloss black color. I painted the table silver because i dint have a black at hand ^^

Looks very cool. I just got one 145, but it is beige and the table paint is worn out. Maybe I'll paint it your way. Thanks

@@fabricio.ferrari thy. Well there are many colors. Pfaff had the better gusto! Adler has a grey... I mean... Grey... Pfaff has class. Good both manufacturers made exquisite machines to work with =)

nice machien to, same problems sometimes.

Well the edge of the saw tooth cut like a chisel. So sharpen them like a chisel. Thats it. I did show that with 3-5 strokes. There are dozens of clips out on how to use a file but non on the idea of how the cutting takes place. And when you understood the idea you will know how to file the tooth. Namingly like a chisel edge. 38-50° degree. Thats it

?

El problema es una resina protectora. Cuando se vendían las máquinas, los vendedores debían quitar la resina y engrasar la máquina. Muy a menudo esto no se hacía. Ahora ya sabes la causa de los rodamientos/mecánicos atascados. La solución para eliminar la resina de los rodamientos es calor y disolventes como bencina, trementina de naranja o gasóleo. El método para eliminar la resina es sencillo. Calienta las piezas atascadas de la máquina con un secador de pelo y hazlo fuera del salón, de lo contrario apestará mucho y tu empresa te maldecirá. Calentar bien la máquina en el exterior, no dejar que hierva, sino unos buenos 40 °C y luego añadir el disolvente seleccionado, p. La trementina de naranja no huele a diésel en la mecánica. Una jeringa ayuda con esto. Calentar todo bien durante 5 minutos. Luego agregar aceite de máquina de coser al mecanismo. Puedes utilizar aceite de parafina como aceite para máquinas de coser. O aceite medicinal blanco. También es posible utilizar aceite hidráulico. Lo que no pertenece a una máquina de coser es el WD40. Se trata principalmente de éter de petróleo, que no es un lubricante sino un disolvente. Las piezas de la máquina deben lubricarse con aceite o grasa. Un solvente no lubrica, diluye los lubricantes para que sean más fáciles de distribuir, pero como está escrito, el éter de petróleo es un solvente. Una vez que hayas lubricado las articulaciones, muévelas hasta que funcionen sin problemas. Eso es todo. Feliz costura.

well thy. Pain exlains good ^^ good i know now something more ^^

No. Why do you ask what do you intend to do?

@@fearlyenrage I have an issue with grey channel, cleaning cycles all the way to deep cleaning did not help, called canon they said purge unit and they will not help further, no local canon service anymore and out of warranty, I need better access to the purge pad and hopefully if I get it cleaned I get my printer to work properly.

@@photozen8398i would sell the printer with the openness that it isnt working properly to a self diy repairguy. And buy me another one used but functioning. I got those printers in Europe for under 200$ I bought 1 here used for 1€ because the old owner left the printer alone after it had him fallen down. He dint even try to use it. I did and had luck. It is a steardy printer. And i can tell you the pro 100 is a better selfrefill printer anyway. Way easier and the print qualitly is enough for me. The pro 1000 is somewhat to undersized. Interestingly a 2000 pro is more attractive now for me after 3 Years of use.

@@photozen8398 ah i forgot the why! Why would i not try to repair it in your circumstances? Because i dont know what to fix. Better go an easier way life is complicated enough. Best of luck finding a cheaper second hand =)

Hi. Thy. Well to ask a question is to answer it. Better be safe than sorry.

what did you end up doing?

si la rueda esta pegada es una resina. La resina se puede llenar con combustible, p. Disolver diesel o trementina. Método: -Desconecte la máquina o se quemará -Poner diesel en los orificios de aceite del componente resinificado -3-5 minutos de calor con el secador de pelo, la resina puede estar muy seca y dura, por lo que el calor es importante para que el solvente funcione bien -Mueva continuamente el componente y ponga aceite de máquina de coser en el mecanismo. Si eso no funciona, retire el componente y colóquelo en acetona o aguarrás y luego raspe la resina del eje.

Si?

El problema es una resina protectora. Cuando se vendían las máquinas, los vendedores debían quitar la resina y engrasar la máquina. Muy a menudo esto no se hacía. Ahora ya sabes la causa de los rodamientos/mecánicos atascados. La solución para eliminar la resina de los rodamientos es calor y disolventes como bencina, trementina de naranja o gasóleo. El método para eliminar la resina es sencillo. Calienta las piezas atascadas de la máquina con un secador de pelo y hazlo fuera del salón, de lo contrario apestará mucho y tu empresa te maldecirá. Calentar bien la máquina en el exterior, no dejar que hierva, sino unos buenos 40 °C y luego añadir el disolvente seleccionado, p. La trementina de naranja no huele a diésel en la mecánica. Una jeringa ayuda con esto. Calentar todo bien durante 5 minutos. Luego agregar aceite de máquina de coser al mecanismo. Puedes utilizar aceite de parafina como aceite para máquinas de coser. O aceite medicinal blanco. También es posible utilizar aceite hidráulico. Lo que no pertenece a una máquina de coser es el WD40. Se trata principalmente de éter de petróleo, que no es un lubricante sino un disolvente. Las piezas de la máquina deben lubricarse con aceite o grasa. Un solvente no lubrica, diluye los lubricantes para que sean más fáciles de distribuir, pero como está escrito, el éter de petróleo es un solvente. Una vez que hayas lubricado las articulaciones, muévelas hasta que funcionen sin problemas. Eso es todo. Feliz costura.

Hi Gerner did the solution work for you too?

what did you end up doing?

archive.org/details/pfaff-260-360-service-manual-en/page/17/mode/2up Go search there at page 63

Yeah why should i show that? Anyone who has the problem knows it. The cartridge wont getout. Thats why i did fumble the rope in and over the release.

@@fearlyenrage I have the Problem and I first have to get the Cartridge out, before I am able to install the fishing rope. Or did you put the rope over the Cartridge when it was still inside (because it was defect)?

@@kaistiepel Also dein Name scheint Deutsch zu sein... Du musst mit einer langen Pinzette einen doppelt geknoteten starken Faden über die Entriegelung legen. Wie? Teste das an einer funktionierenden Entriegelung. Das Problem liegt daran das eine Noppe an dem Mechanismis abbricht. Das Problem ist Canon bekannt.

@@fearlyenrage also die Schnur über die nicht auswerfbare Patrone drüber heben. Werde ich versuchen. Der Drucker wurden bereits ausgetauscht. Ich habe für alle Farben 2-4 Ersatzpatronen vorrätig. Da liegt richtig Geld rum. Wäre schon schlimm, wenn der Drucker nicht mehr funktioniert. Ich habe ein Board gefunden, wo viele Leute über dieses Problem diskutieren, das scheint also oft vor zu kommen…

@@kaistiepel nicht über die Kartusche! Unter der Kartusche nach hinten über die Entriegelung. Wie bereits geschrieben, finde dem gesunden Mechanismus heraus wie und wo die Schnur ziehen muss. Es sind die 1. Zwei Füsschen wie im Clip zusehen. Du schaffst das schon

Wie ich grade lese hat scar throw auch so ein Problem. Ich werde die Heizpistole mal ansetzen, die elektrik ist hier zwar im weg aber nur Licht. Und alles bröselig. Die knipst ich ab und mach was neues dran.. Der lichtknopf ist nämlich auch halber ab. Mann Mann... Sowie was schwergängige wird, wird druff rumgedengelt bis es kabutt ist😬🙄🙄Genau das selbe wie bei Fenster und Türgriffe... Anstatt dass man mal bissje Öl drauf macht bei Zeiten..

Neu... Nein aber als Ersatzteil aus der Bucht.

Dachte ich schon. Am besten frag ich mal im Nähmaschinen Technikforum nach. Das sind dann doch eher die Fachleute die Nähmaschinen ganz zerlegen.. Danke für die schnelle Rückmeldung 😎

@@beakittelscherz5419 Ja wir zerlegen ungerne nur für Ersatzteile farmen. Wir revidieren, restaurieren und erledigen eher kleinere Reparaturen und auch das nur auf Vorausskasse, dann haben wir kein Kapital in Ersatzteilen gebunden. Kenn paar Kollegen die haben so 40 halbe Maschinen rumstehen. Macht keinen wirtschaftlichen Sinn für uns ^^ Auf Ebay Kleinanzeigen wirste sicher auch fündig.

immer schön krachen lassen sonst "rauschts im Wäldle!" ;)

Hi. Das Problem ist der Harz nicht die Mechanik und welche Hebel sollen das denn präzise sein bei der gezeigten 362 ? Und nur ölen wollen bringt auch nichts wenn der Harz nicht flexibel wird hilft nur zerlegen und mit Diesel oder ähnlichem Lösemittel das Harz entfernen. Und an der Nadelstange manipulieren wenn die Maschine läuft ist keine gesunde Idee da kann man sich ganz schön die Finger einklemmen.

Well thank you. It is very nice indeed to been able to learn languages but that can anybody do :)

@@fearlyenrage ha ha you are right. Personal choice.Thanks again and all the best to you

Let it sit with the deep creep and oil and totally ignored it and now it is working.

Sytem ist ne Granate! Kostet halt was aber dafür kann man endlos MFT Platten herstellen. Es schleicht sich halt ein additioneller Bemessungsfehler ein. Wenn man nicht von der Mitte des Musters nach aussen arbeitet. Aber der Erfinder weiss das, wie er entsteht kann ich nur mutmassen. Schlimm is es ned 1-3 mm je nach Grösse des Musters halt.

Correct you have to move the unit some what to get it out.

@@fearlyenrage no, I mean when he takes it apart and puts it back together, the last little piece that is installed that looks like a little bent l shape, which also has a set screw to hold the whole piece together is pointed the opposite direction when he removes it from the machine, but when he reinstalls that piece he turned it 180°. It's hard to see but watch it closely.

@@patriciapetersen8607 i made the clip by myself so i can assure you certain that you have to fumble the part inside slitghly. the bend finger has to endup at the topside to engage with the gear inside. When you want to clean the machine from the gunky resin then take a hairdryer and warm the machinebody to 40-60°C. Oil all joint deliberately try to move all joints. When you dint succed use Dieselfuel first on the intact machine. And then finaly when nothing helped take the machine apart and film what you do and and do that outside your house. Smells horrible! !!!!!!!!!!!Mark anypart connection with a sharpy so you see where what has been connected!!!!!!!!!!!!!!!!!!!! Why?! Because to reset the machine interconnection mechanism is the hardest part you have to do. It has to been done accurate to 0.05mm - 0.15mm or the machine will not function proper. Use oil, then a fan, then Diesel, then , a screwdriver! Good luck happy sewing! :)

@@fearlyenrage Thank you .. Danke