วีดีโอ

Can you print 3ft or 5ft pipes with a spiral design so we get maximum surface area both inside and out, and one side very porous while the other side is glazed so it is water proof?

This is the best yall could come up with for build instructions? Yall need to seriously create better instructions for realz. This + the super limited paper included are garbage and don't instruct one bit. For the cost yall should at the very least have decent instructions.

You forgot the kiln paper so took bits of your kiln off on the back

very nice, something other than the cocoapress

www.reprap.cn

Finnaly, edible benchy)

Nice!! Wondering if the extruder does de-airing.

Amazing! Let's see a benchy next!

www.reprap.cn

Hiya, thanks for the video! What type of clay and glaze did you use please?

What do I need to do with the firmware when using your kit on my ender. How do I switch off the safety temperature mechanisms?

aliexpress shop link not working!

Suprising the archeologist in the year 5000.

But YIKES $280! Is a steep price. Cool still

WoW!! DOPE AF!

geaps ?

Awesome!

What an awesome project. Shows how a bit of creativity can open doors in ways most don't think of.

🎉🎉🎉

I'm thinking about getting one of these? Any reason I shouldn't?

clay 3d printer

🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿🗿

store: a.aliexpress.com/_EJhI2P9 www.reprap.cn facebook: Related videos of clay 3D printers: facebook:facebook.com/reprapmall Clay purchase：a.aliexpress.com/_m0us08s

Damn! I see it "censors" the model 😂

🎉🎉🎉🎉

What does the cable do that you connect to E0 (CLK). I have a Ender 3 with a bigtretech skr3 V3 board and don't know where to put this cable - can you help?

Что ето

I’d be interested to see some engineering type stuff printed since fired ceramic can withstand such high temperatures. Potentially a nozzle for a jet engine or something like that, if it were possible to make sure it wasn’t going to blow up when you heat it again.

This is fucking genius ❤

ok thats so cool i got mad lol

Great work. Will you bake it after printing?

are you just using a direct attachment of the clay extruder, then in a third party like klipper changing the flow rate to match the nozzle size and extruder flow, that is a very smart way of doing it! I do have a question on how you are getting the correct ratio of water to clay in the mixture you are using, or are you buying a pre made mixture that you just use? Still so cool to see a pot that big not fold in on it's self!

❤❤❤❤

nett aber gema?

that's pretty cool! good job!

🎉🎉🎉🎉

Please release Delta version of this with 2L tank. Thank you

very cool

Is the software updated not to need ancient unsupported versions of a bunch of Python modules?? I could never get mine to work because of that...

I have a K280 plastic delta 3D printer, i want to upgrade it to clay printer, i found an Extruder you are selling. But no documentation on how to assemble it. Like how i found it for the plastic printer. Is there any video? I am looking at mechanical 2L

Donde consigue el software?

How about printing in concrete? Would prefer to avoid heating in a kiln for final product.

I've thought about hopping on the clay printer train, hope to see what you make next!

Just a suggestion: make the clay cartridge part operate separately by using a presser sensor to keep it under constant pressure, then next time someone wants to modify their printer to this they can just swap the hotend and adjust the extruder steps/mm. this will take minimal modification to the original printer and can always be reverted back great idea by the way would like to try making form old ender 3 if I get some spare time😁👍

I want to make one, so cool

so you 3d print with clay then I assume you fire the finished print in a kiln? Interesting idea.

I wont this machine

From where can i get this printer? And which is this company

🎉 'promosm'