วีดีโอ

yo you can just buy a new aftermarket clock spring for 30$ he spent a lot since he bought a new angle sensor also

I have the BC RM, and they are garbage. They bounce too much, the shock absorber cannot properly control the spring, and they cannot be adjusted adequately. They have limited suspension travel and make noises (the manual states they are not responsible for any noise the suspension makes).

Update my lights are still on I’m not sure what I did wrong 🙂‍↕️

I don’t have the Lexus anymore. 🙃 But I did eventually get tuned before I sold it.

Yuuup 20mm spacers from AeroFlowDynamics!! They really flush the stock wheels out and make it look more aggressive! 🙌

Thanks! Installing my coilovers tomorrow morning on my 86 and didn’t know if it’s necessary or not.

Not at all just looks better!! 🙌 Goodluck on the installation!

Yes!! I was running 20mm spacers from AeroFlowDynamics! They work perfectly with the stock wheels. 🙌

No 😂😂

I think my steering angle sensor needs to be replaced, because when I bought the new one it came without the sensor and I had to swap the old one in. So I think it’s faulty. I’m gonna buy a used one and hopefully it works. Although it’s been pretty sweet having no traction all the time. 🤣 The lights are annoying though.

To add to this I also bought a new angle sensor after going through what you went through and Toyota themselves cannot figure out what’s wrong. Stil showing all the lights

MBRP

Dude I know it’s crazy… the way I look at this car it makes my girlfriend jealous. 💀

No after some adjusting, it’s definitely shorter! I went much lower after I got everything in! 😅

Yea still holding up really well! Only thing is, the red leather has kind of faded but the suede has held up nicely! 🙌

Appreciate you bro!! 🤝🔥

Yooo appreciate it bro! 🙌🔥 Congrtas on the whip!! I haven’t done a professional ceramic coating on it, just ceramic detailer that provide pretty basic protection. The best advice I would give you is buy a proper drying towel and always use detailer when drying your car! This is gonna really prevent swirl marks. I made the mistake of using a cheap microfiber and detailing my car when it was dry… Added some slight swirls that were not there before. 🤣 I have 5% all around and 50% on my windshield! I also have a video about it! Appreciate the love bruddah. 🤙🔥

@@christiancervanntes thanks bro! Ok cool, I was thinking to get a really good drying towel. I’ll have to find one on the website. Nevertheless it’s good to know your percentages on the windows I might go with the same one lmfao was undecided on which to get due to not being able to see at night but it just looks so good with black paint man!!! 🔥🔥🔥

I personally did front end ppf with ceramic coat on whole car. The black manages to stay clean longer

Appreciate that bro! 🙌

86speed!! 🤙

100% just won’t have a functioning airbag. 🤣 Keep the steering wheel nut on loosely when you break the wheel loose & you won’t break your clock spring. 🤞

It’s actually very simple, I’ve change my wheel dozens of times, just leave the steering wheel nut attached when you’re removing the steering wheel to stop the wheel from pulling out the clock spring

@@maldonadostonecan you re phrase that? I’m looking to change it aswell but scared of messing up the clock spring

@@lunar3009 the nut that holds the steering wheel in place, loosen it but do not remove it. Pull/wiggle the steering wheel free. Disconnect all wiring, remove nut and remove steering wheel. I use painters tape to hold the clock spring in position while I assemble the steering wheel

Yeah I also show you in the video where I went wrong, and how to avoid it! 🙌

@@maldonadostone hey i installed the steering wheel but The air bag is loose, everything else works and connected but The clips are on and it still is loose

So insightful!

Appreciate you brotha!! It’s hard making the time, I already have like 3 videos filmed just haven’t made the time to edit. 🤧 You just motivated me though!! New video is getting dropped this Friday! 🤝🤝

Best car bro, you’re gonna love it. 🙌

😳😳👀

You already know!! Appreciate you gang! 🤝🤝

Appreciate you brotha 🤞🔥

Coming in a new video soon brotha 👀🤞

Appreciate you Bill! 🤙

Yesssir thank you bro! Appreciate you! 🤙🔥

an what do you do to maintain the paint? ceramic coating or do you wax every 2 weeks😭😭

Thank you bro I appreciate that!! 🤞🔥 Well yea I have 5% all around and the 50% on the windshield but I think I wanna go darker like 35% on the windshield.

@@NinoInTheCommentsI use a ceramic car wash soap and I always dry the car with a graphene detail spray! So that provides a decent amount of protection. 🤙 Nothing crazy though!

Heck yea bro they’re definitely hard to find if you’re particular on spec and color. 😅 This is actually my first black car and it starts to look dirty really fast but the way it looks when it’s clean is wayyy worth it to me!! Just for some insight I probably wash the car about once a week 😅 but if you park it in a garage I’m sure you could go longer!

@@christiancervanntes okay bet! I appreciate your feedback! I must say I’m not in a situation that I can wash my car once a week so thank you for that! Not really specific on 1 color but Raven, White, Pavement and Neptune blue are my top 4. Any color out of those and I’ll be the happiest man!!

@@yamoisredeemed Hell yea bro those are all dope colors!! Goodluck with everything brotha I hope it all works out!! 🤝🔥

Oh word? Yea I would say they’re probably a little more laid back here in the states. But I could still easily get a ticket. 😂 Thank you though bro, I appreciate you! 🤝🔥

Bro you don’t understand this car is too much fun. 🤣🔥

Thanks bro! 🙌

Yesssir made the craziest difference. You’d have to have removed an exhaust without them to really know how clutch they are. 🤣🤞 Aww, yes mbrp came in clutch with that sticker forsure!

Good to know, thanks for the advice! 🤙