วีดีโอ

Bro left me for dead 💀

same bro, but i had a loose helmet and no gloves so it was worse than it should have been

You can see that you do not have enough experience or have done enough spark plug changes .. you didn’t have the correct tools to make it easy 😂😂😂

florida side walks suck 😪

If you need to top off, you just need a gear fluid hand pump for like 7 dollars and a 1/8" npt to 1/8" barb fitting for a dollar

This video helped me do this over this weekend. I thank you for posting. If anyone is interested in replacing the washer for the transmission bolt (the 22mm bolt that makes contact with the bottom of the ATF pan), the Ford part # is: 4W4Z-6734-AA (Ford calls it "gasket", but in reality is a small rubber washer). Hope this helps someone.

Use Motorcraft Mercon V transmission fluid. For everyone asking what type of fluid to use.

What are the name of the while clips and where can I find them

I dont think walmart has a police and procedure about shopping in store with ebike, i would demand to have the store mgr show me in writing the PP.😮invite the local news To cover your story, its a shame they treat cyclists like criminals when all were doing is conserving our environment. These pricks need to be talk a lesson..

Crack, I needed this video

You're riding a motorcycle

Hello, All good to feature it? Full credits + notification for sure.

happened to me yesterday at like 30 mph, hit a trash can and think i broke my wrist. sucks

I laughed so fucking hard when you noticed that you got left on scene 😅😂omg mf was already on warpdrive by the time you looked back Holy fuck 😂😂😂

Hitting the curb at that angle made the rear wheel slide to the left, right out from under you, tipping the bike over.

Good thing you were wearing all your gear. Could have been much worse.

Yellow guy literally gave me NPC vibes the whole way through. Especially when he dipped lollllll

He hit my skateboard on the sidewalk and he tryna leave!

Lmao 😂

I had a bad accident, thanks to a car going over the cross walk. I got two back ribs fractured and one bad finger for a year or more. These ebike are dangerous, but I like my riding on a good ebike, not a Eahora...

😂😂😂

You did an amazing job! Thank you so very much for this walk through. I love working on my car but struggle at times know how exactly to fix certain things. Had a fuel injector leak yesterday and was freaking out about the repair bill. Though the parts weren't cheap this walk through helped me save several hundred on a mechanic bill. Keep up the good work! ❤❤ Thank you again! 😊

No where close to 30 mph. not even 20

More of a curb-not than a curb-hop...

I was reading how there's a lot more accidents because of all the cheap e-bikes and PEV type options nowadays. I'm an old guy who just got his first esk8 a few weeks ago and recently fell on the pavement at speed. I was wearing Tripple8 brand skate elbow and knee pads, but the elbow pad slipped up and I completely scrapped all the skin from my elbow and forearm. I'm now wearing beefy plastic motocross padding - almost like I'm wearing riot gear. I don't care. It hurt so bad.

Is the shoe ok

Good job man. Question. What was the reason to replace yours injectors..?

Do you have to put a new filter when you change it?

Vise Grips and pliers are not wrenches. 😅 but good info..

Geez, you've been ragdolling a lot! 😭 Hope you're alright my guy.

dude weaves through traffic, crashes... then takes off and speeds around people cutting through grass and parking lots on his way from the crash.... nice... really doing the rest of us favors, sigh.... I at least hope you didn't seriously injure yourself dude... maybe don't drive it like yer offroad on a mountain/dirt bike... so you and no one else gets hit.

Note to self: get decent gloves to not get hand-rash…

There is so many things I found that were said wrong etc etc but that's how you learn keep wrenching buddy good job 👏🏽

your mistake here was attacking that curb at such a shallow angle, while at such speed.

lol, he just left 😂

Hopefully u just recruited the scooter dude to eskate 🤙🤙. Great slow mo action

Sorry that happened. Lesson is look as far down the path or road or snowboard trail as you can. Works for every type of vehicle. Glad you are ok bro!

a ford mechanic told me never to change the fluid can cause the trans to fail

I fell just like you did. My hand and the skin near the elbow got scraped 😢. Luckily, I was wearing double clothes for my leg, which was left with bloodied, but not bleeding. My fall was worst, I was going down a slope like an idiot during my second day on the electric skateboard. I was fortunate enough to have fell from a video I watched the previous year where I position myself like a ‘ball.’ Had I held my hand out, I would’ve broken it. Or used my back hip, I would broken it too. Learning how to properly fall is important. Lesson learned, always wear protection.

Ugh

*5000*

...what type of FLUID ???????🗣️🗣️🗣️🗣️🗣️

U want to clean the top of the motor around the fuel injectors out first before you start to remove anything!I start off by using my leaf blower then I'll use my air tank hand blower next ill get my shop vacuum and I have a small thin connection to get in between the smaller areas! After that I ll spray foam engine degreaser spray and carburetor cleaner to break up any hard dirt build up.Then a scrub brush and use then paper towels to clean it up.The paper towels will work best because u don't want any fine material to cause u any problems and then finally il blow off 1 last time.Plus after I install the injectors ill have a nice clean motor to show off.

Hello! Can I feature this video for a youtube edit that I'm working on? I'll credit you with watermark on screen. Thank you in advance.

Hello! Can I feature this video for an edit of mine? I'll credit you with watermark on screen. Cheers!

If I’m going to hop up a curb I approach it at no less than about 50 degrees or best straight on! I’ve jump up many curbs this summer and approached 95% of them perpendicular (straight on). This is on a 26” fat tire Ebike. I now have two e-bikes and the other is the 20” Aniioki AQ 177 pro max with insane 60AH battery! Between both bikes I’ve rode so far about 2800 miles the past 1 1/2 years. Mostly city traffic NY / Queens Brooklyn traffic. I ride very carefully unlike many ebikers. Only had one close call when I was going about 24’mph and a big Ford pick up decided to make a right turn right as i was passing that road! I tried to stop couldn’t so quickly turned WITH HIM and my chin/face was inches from the pick up bed. I was a little shaken up but just took a deep breath and turned around and went back on the main road on my way. Only fell ONCE! That was trying to hop up on the ramp that leads to the boardwalk. I was on sand barely going 4-5 mph straight on to the ramp. It was about 6-8” higher than the sand so i throttled the bike and pull up on handlebars to “jump” Thst lip. Being on sand back slide right out from under me and I flopped on my right side. Not a scratch to me or bike but I broke the brake lever. Might add it was a graceful fall. Lol. I ride from queens sometimes to manhattan and so far no incidents!!! I’m 57 but still think I’m 23. Lololololol

"Awww sheeeee-it-uh" LOL I think we all know that feeling.

That’s what I ride 😂

I know this is an old video but i would appreciate any helpful responses. Is there any way to tell if the fuel injectors are bad prior to removing them? If there isnt would you be able to tell physically once you remove them and inspect them. I currently have a misfiring cylinder 4 and already replaced the spark plugs which didnt fix the problem so my next guess was the fuel injectors.

A true professional!!! Damn good job I couldn't have asked for a better instructional video!! Thanks again brother! I just wish more people were like you!!