วีดีโอ

Rosa great video best on TH-cam good job. We’re building one right now. Lotta helpful hints. Thanks again.

Just curious if you could tell me the exact lengths you cut the bottom 4×6s ? We are building ours this weekend going to do ours the same way you did

How is it doing to this day??

Hey i dont think u mentioned the size in part 1, is it 6x8? 🥰

We bought one plan on assembly in the next month

Great job! They’re beautiful!❤

Why did you use 4x6 instead of 4x4?

3:46 so I see that is in the shade. How has this worked out over the past year? I'm just curious, because there is a bit of shade in the spot where I'm thinking of putting the greenhouse right now (End of September), but of course, the leaves will be gone in a couple months or less. The shade will move in a couple hours, but still - I just thought I'd ask.

i like you

Thanks

Thanks

Thanks so much for doing such a comprehensive build video.

this is the most helpful video for foundation I have found. thank you

Hi! Did you remove the grass before laying down the landscaping fabric? Thanks!

It looks amazing!

Just bought this greenhouse. We're waiting to assemble it this fall. Great video!

I live in the upper midwest, zone 4, where it regularly gets negative10F and colder during the winter, we get heavy snow, and winter is almost half the year. I put my Costco Yardistry greenhouse together last fall and was in it in early March starting some seeds like cabbage, kale, onions, swiss chard- whatever has worked for winter sowing in the past. I also started some seeds inside and in the usual winter sowing containers out in the snow. Of all three ways to start seeds, the greenhouse worked the best. So next year, I probably won't be starting anything inside, and I'm definitely ditching the winter sowing containers. By mid-April I was able to start the warmer weather plants like tomatoes, peppers, and even louffa! Squash, corn, beans, basil, dill, sunflowers, petunias, marigolds, melons all started successfully in the greenhouse without any extra heating. When it started to get over 75F I did notice that even with the roof vent open, it was still getting too hot in the greenhouse (mine is in full sun), so I took the triangular panels out of the gable ends and replaced them with screen cut to the same shape (I did have to take the roof apart a bit to get the panels out and slide the screen into their place, but it was pretty simple to get it apart and put it back together). This works really well to vent the excess hot air and it still stays plenty warm enough. It cools it sufficiently without even opening the roof vent now, even in the 90s. When it gets colder, I made four paneled triangles I can just slide into place like little storm windows (I won't have to take the roof apart again since they just slide in from the inside). I still want to put a solar fan inside to help even more with circulation, and a small heater to help things get started even earlier. I love this greenhouse. I don't regret the purchase or giving up garden space for it. I would definitely recommend getting one if you garden a lot. I have a 40ftx40ft veggie garden and had plenty of space to start everything I needed. Your videos were really helpful in the build. Thank you!

Snow load rating?

Your videos were so helpful just put ours together this weekend ❤

Great Video. I’m ready to start my wife’s this morning. I own a paver / hardscapes business so I am laying a Unilock Richcliff paver floor first then building off of that 🫡 Great job and video thanks for sharing

Took us 2 days as well. Some parts did not fit square, ran out of window tape with 4 windows left to install, door was damaged during shipping. Yardistry sent more tape and door quickly. I ran an underground conduit into the front corner under the shelf for electric, and will install a spigot for water feed. Caulk as you go or it will be more difficult to do later. We built on a 4x4 treated lumber base on a packed gravel bed, drilled holes in the shed bottom sill, and attached with wood srews/washers. I will anchor the 4x4 frame with hooks and drive brackets through the gravel pad. Bought an LED light strip to mount on beam. Bought online and the 2 weeks later local Costco had it on sale :( We love the shed!

Wonderful Video! I put together a list based on what you stated and what I saw on the video: 4 @ Simpson Strong-Tie 2-in x 3-in 12-Gauge Galvanized Steel Angle 1 @ Power Pro #8 x 1-1/2-in Epoxy One Exterior Wood Screws 8 @ 0.38-in x 2-ft Steel #3 Rebar 10 @ American Countryside 0.5-cu ft Tan Paver Base Sand 10 @ American Countryside 0.5-cu ft Gray Paver Base 4 @ Simpson Strong-Tie 4-in x 2-in 20-Gauge Galvanized Mending Plate 4 @ Severe Weather 4-in x 6-in x 8-ft #2 Southern Yellow Pine Ground Contact Pressure Treated Lumber Does this look correct?

Terrible mic audio 😅

Hey! I just bought my greenhouse and we are struggling with the same step. The pop up window. Were you able to figure it out?

Why didn't you put the pavers in when you built the frame, i think it would of been a lot easier at that time ? just saying

Thank you for documenting this! This was very helpful as I recently started assembling our Yardistry Greenhouse. One question I have that I didn't see in your video: Did you secure/attach the greenhouse baseboards to your 4x6 base; and if so, how? Thank you.

Is your greenhouse in shade most of the day? We just bought one last week and noticed the spot I wanted to put it, gets a lot of shade, so we started building the base in an all sun location for the seedlings to take advantage of. I know some people just turn their greenhouse into a craft shed lol

Did you ever secure the greenhouse to the base? I know you used rebar to secure the base into the ground but then it looks like the grenhouse just sits on top?

🎉🎉🎉🎉🎉🎉

How did you attach the greenhouse to the base? Did I miss that in the first video or this one?

Did i miss where you attached the greenhouse to the foundation? Curious what hardware you used

Use toilet bowl cleaner to get film off then use kilz2 designed for galvanized. I am in the process of doing the copper version you mentioned. I am in priming step.

Really nice!

How big are the boxes when delivered?

How big is that pot 🤔

I think I'm missing part #1133. Who's has an extra 1133?

Thank you for sharing. We just purchased a Yardistry Greenhouse (6.7 X 7.8). Would liked to have seen you prepare and install the Side Panels, i.e.; removing the film and adding the top and bottom tapes. Also, note to assembly: first confirm location of predrilled holes to assure correct placement of wood pieces. The (1119) Front base is case in point.

Do you need to drill pilot holes?

I got all warm and fuzzy when he looked at the camera, right at me.

Did you consider finding a way to bring water into the greenhouse? There isn’t really a way to bring in a garden hose, so I wondered how you handled watering your plants.

How well does this hold up in wind. We get some pretty strong winds in the midwest

Do you have to build a wooden base? Or can you just to patio stones?

Out of curiosity, why did you opt for spray painting them rather than buying two different colors of pavers? I only ask because your color contrast seems like it could've been replicated with pavers fairly well using 6:29 light gray and 6:40 dark tan pavers as opposed to a color that pavers don't come in. I'm planning to buy the same greenhouse in the next few months and I'm watching your videos as inspiration.

I missed how you attached the greenhouse to the 4x6 base. Did you drill and screw the frame into base? Love the pavers. I had planned to use 2x2’ pavers, but those things weigh a tonne. Your 1x1’ pavers are perfect. Excellent plan to have pea gravel drainage!!

Getting ready to order this exact greenhouse. The foundation is a real sticking point for me, thank you for walking us through it so clearly!

YUMMY 😋 LISHOUS!

Thanks for sharing! I just ordered mine an hour ago and am so excited!

I just bought myself one of thease and I can't wait to put it up! Your vidios have been an awsome insight as to what is in store for me.

If you measured 6'8 /7'10 the frame is to big for greenhouse

I’ve been trying to find, in your videos, where you secured the greenhouse to the 4x6s. But I can’t find it. Can you help me?