วีดีโอ

For CD4511 IC you need to use Common Cathode 7 Segment Display. For More information please Follow me on Instagram, link is in the description box.

@@its015 oh jadi itu masalah terbesar saya 🤣🤣🤣🤣🤣 oke saya menggunakan 7447 saja kalau begitu 😁👍🙏

@@putriamalia422 Yah

🤗🤗🤗

We can make a digital clock pulse generator by extracting the circuit from the old analog clock machine.

Congratulations 👏🎉👏🎉 🤗🤗

I can solve this problem. please text me an instagram, link is in the description box.

Atau saya harus menambah micro limit switch pada bagian pedal perseneling untuk switch up and down

Yes..

@@its015 thnks, i try in bredboard now. I subscribe you 👍

@@putriamalia422 Thank You

Do you want to see the gear position of motorbike in 7 segment display..?

@@its015 yes, my motorbyke just N and top, i need gear indicator like N,1,2,3,4 in single 7 segment. I trying build but fail 🤣

First you need an up and down counter. Now you have to do something in the gear of your motor bike so that a clock pulse is generated during gear up and a clock pulse is generated during gear down.

th-cam.com/video/9eVRcdktLOg/w-d-xo.html

Check your self lock switch with the continuity mode of the multimeter. And check the seat of 1n4007 diode

Bro I have applied as you have applied on breadboard just one switch is used I will remove it with self control switch then let see

yes, If you use a push switch, it will act like a counter.

Thank You 😊😊

its okay ,,, my circuit is now counting properly ... because of wire from reset button is fooling

Congratulations 🎉🎉🎉😊😊😊

Voltage Source 9 Volt Current Source approx 500 mili Amp.

😊😊😊🤗🤗

Connect Reset pin of IC 4026 to Ground through 10K Resistor.

yes , you are Right time is not currect but if you want to fix the timing then change the pulse generating circuit. You can use 4060 IC instead of 555 Timer IC. How to generate 1 Hz Clock Pulse : th-cam.com/video/0GqoldkmgRk/w-d-xo.htmlsi=QdVT8DrhAGraRpsd

drive.google.com/file/d/1k_3svG5zhcU8ZsUlPJ00nC35x1pd8CoL/view?usp=sharing

@@its015 can i use another signal pulses,

Yas, All Digital Signal Pulse can use.

th-cam.com/video/MuoVz8_ht-8/w-d-xo.htmlsi=xG6eQRSzctHkpCTY

@@its015 I also want it to have a 555 timer. That one didn't have one

@@yubinator7455 OK, I'll Upload Video about this.

Check Circuit Diagram. Link is in the description box.

Yes.

@@its015 Thank you for replying. Do you have tutorial for water level indicator using RF433 and ht12e and ht12d ic? I able to make it buzzer goes off when water reach highest level but not lowest level. I'm using only one buzzer for the circuit to save space on my zero pcb.

OK, I'll Try.

😊😊😊😊

Then these diodes cannot be used.

3 input AND gate should be used instead of three diodes.

If you don't want to use Preset then you will use approx 4.7 Kilo Ohm resistor instead of Preset.

I used logic AND gate in this video. In this circuit, three 1n4007 diodes and one 100K Resistor work as AND gates.

@@its015 Thanks for clearing my doubt

@@its015 ok. So if I use a 3-input AND gate instead of 3 diodes and a 100K resistor then the display will show 1 to 99. Am I right?

@@user-vv2ge4uh4c no, If you want to Count 00 to 99 then no ned to use any AND Gate.

Thank You 🙏

You make it correctly?

1st Check Your Pulse Generating Circuit and then check both of CD4026 IC Reset Pin.

Welcome 😁

Next Video 🤗

​@@its015 Thanks. Please do it as soon as possible. Components for digital stopwatch(seconds) 1. One Timer IC (555 Timer) 2. D Flip-Flops / any counter/ 4026IC(choose one which make the circuit less complex). 3. Logic Gates(AND, OR, NOR. Use atleast one logic gate). 4. Two 7-Segment Display 5. Breadboard and wires. 6. Resistors and Capacitors. 7. Two Push-button switches(one for reset, and other for start and stop) 8. Power Supply.

​@@its015Bro, can you make and upload it today or the next day? Please confirm🙏

@@user-vv2ge4uh4c Next Sunday

🤗🤗🤗🤗

Thank You Again 🤗🤗

Really..? 😁😁

@@its015 Yes! Because your content is more useful than most of content on youtube.

Thank You

Thank You 😊

I'll Try.

​@@its015Thanks. Please do. I am waiting.

​​@@its015 1. One Timer IC (555 Timer) 2. One Flip-Flop (SN74HC74N D Flip-Flops) 3. Two Logic Gates ( one AND gate, one OR gate.) 4. Two 7-Segment Display 5. Two Momentary Push-Button Switches 6. Resistors. 7. Two Capacitors(10micro faraday and 47micro faraday) 8. Power Supply(9V) 9. Wires and a Breadboard. Try to make it within these components. Add other components only if these components aren't sufficient enough.

​@@user-vv2ge4uh4cyes! I also need this

​@@its015Yes! I am also looking for it

Thank You so Much 🤗🤗

What exactly are you trying to do?

​@@its015If I am correct then, the circuit you made here works with sequential logic. Now if I want to apply combinational logic as an addition what should I do?

What kind of logic do you want to apply?

No

Thanks 🙏🙏

Thank You so much 🤗🤗

I can't understand what you say ?

🤗🤗

Connect IC pin 3 to VCC (+5 to 9 volt)

Can I use IR sensor

I connected 3no. Pin to vcc but it not showing all 7 segment pins

@@abrarsharieratul6032 Oveasly you can use IR Sensor

@@abrarsharieratul6032 What's Showing ?

I don't understand why your circuit doesn't work. I think the Seven Segment Display you used is not a Common Cathode Display.

I think it's not possible without Arduino or any Microcontroller.