วีดีโอ

по инструкции MB крепится на 9 болтов ,но на плате 10 мест креплений.нужно поставить на 10 болтов?

Unlucky bro as I was picking the frame up gently one ribbon detached from the glass. So bummed

Hey i took everything apart and got new strips but I'm having issues putting back the acrylic diffuser support. any advice on how it needs to be put back in a certain order or why some screws aren't screwing it

Same board same cooler , not installed yet. I really want to know where should i install samsung 990 pro , blazing m2 area , or where you installed ?

I am dealing with the same problem, i have a Samsung QLED 65" with one connect box. Can i follow the same procedure as yours? Thanks in advance

You sir are awesome ! Thank you so much for taking the time and effort to do a very detailed repair video for this issue. Verry well done !!

Too much talking without sequence.

I am very interested in your input on the Fractal North case. Does it deserve the many complaints it has received, such as thin gauge metal and terrible screws? I am looking at getting this very case.

I have been saving money for these system parts for a long time. Could you please share the tests such as system performance and temperature values? I'm especially curious about the 7800X3D and mobo frequency and temperature values, how long does it keep the mobo vrams cool enough for the 7800X3D? Thanks for the review, have a healthy day. 👍

Great video! Just finished the backlight replacement!

Hey great video would this also fix a completely black screen on a 55” frame? I’ve swapped in a known good one box and cable and no luck, the led lights on the bottom and flashes with a clicking sound then it stops.

Only one usb 2 header….

I have to do this to my tv it just started doing this. Where did you purchase the backlights?

I was going to install a Gen 5 m.2 on this board, but it reduces the PCIe lines for the graphic card from x16 to x8. So I guess better to use a gen4 for everything like gaming and rendering, and gen5 just for direct storage apps.

Any advice with a TCL QM8? Is it similar disassembly compared to this? It is an 85” so it’s going to be a total pain. Think it will be possible? I have one small section of backlight out.

Those coils on the power supply would be a fun time if there like a pc power supply 😮

It don't have dp port??

How lot it serve befor pump crush? I want to buy that AIO

So it goes into the same kind of slot where the gpu goes?

Try not to bend the hell out of the new strips , they should arrive perfectly flat

Very helpful, thanks! Used this guide to replace the backlight (only 16$!) for my Samsung UE75RU7100. Good as new again. Lifting the LCD panel on a 75" was nerve wracking though, but we were very carefull (it was definitely not a one man job) and everything worked out perfectly. Thanks for providing so much detail!

From 21-22minutes in the video, whats the name of that copper components???

This was an amazing, well outlined video! Worked perfectly. Thanks!

Great video! I will surely follow it to fix my TV. Please, could you inform where did you buy the new LED Backlight strip? Model? Details? Thank you!

Somewhat helpful. Keeping the camera at the same distance without showing some critical parts up close was pointless. More like see what I did.

I have been trying to get you to give me info about getting a replacement screen to TCL Roku TV please let me know if you can help me find one please. Thank you Pete

You want your radiator pipes coming from the top otherwise you will get air into your cooler pump which can cause a gurgling or vibrating sound and shorten the life of your pump.Your cooler pump should always be lower as you want gravity to bring water down your pipes into your cooler and not the possibilty of a small amount of air getting into it.Sealed all in one coolers have a small amount of air in them.The manufacturers cannot remove all the air as it will leave the system presurised causing the possibility of water leaks and other problems.I have installed my radiator at the top but i can see you dont have that option.Mind you it does not always happen but If you do get air into it and hear noise just remove your radiator and lift it higher and shaking it will disperse it back into the radiator.

Great tutorial and I successfully replaced the strip which fixed the darkening issue buuuuuuut now it has a whole chunk of black (as in nothing displaying at all) screen up the top 😂

Сколько стоит в среднем такой ремонт в США?

18:05 So I got the same alignment issues with the screws, however I just switch two screw. So left went right and right went left. And voila now my cool-pump does fit on my threadripper socket. With much pressure, or breaking the screw thread.

I’m having issues where the Argb female port wont reach my mobo. Am I missing something?

Which TV manufacturer had phosphorus problems with their panels which made everything blue

Thank you. Problem with my 8000UP; I fixed it, and I appreciate your help.

Its posible disabling motherboard rgb?

Hello, Will this work for samsung qn65q60baf?

21:27 give it some WD40!

Building with this board and it's many miles away with a relative right now, so this was super helpful

Hello and thank you from Greece! I'm looking to replace the backlight of my tcl 55p725. Do you happen to know how many led strips are required for that model? All the sales listing I see provide 2 strips of 15 leds (7+8 I guess). Is this enough?

RIP your AIO

Amazing video, found an 65 inch on the side of the road with the same issue. Fixed it up and its perfect

37:05 You forgot the speakers

Would it be possible to install other fans that have argb connector and 4 pin pwm ?

Take out the cooper lid and add water. I order 3 day ago the same cooler and when I shake it I can hear how the water splash insite haha. My one take around 40-50ml more liquid to fill to top.

Hello there :) Thank you for the nice video. I just built a system yesterday with the same mobo and the same aio. First time i ever used an aio tbh so i was a bit clueless. I connected the aio's cables like you did except for the vrm one which i put on CHA_FAN1 on the bottom part of the mobo. I did that because thats what seemed right by what I saw on videos and the mobo's manual didn't explain it in detail. I hope this is the cause of my issues and i will try to swap the cable and see if it fixes it when back home from work. My broblem is basically that (i believe the radiator fans) spike to high rpm with only a little bit of movement in a game like WoW ie. And when the character stays put, the rpm goes down. It's weird and i played with bios settings a bit without any improvement (version 3.06). I also tried the latest beta version 3.12 i believe, and i run into more problems with that one, mostly with the pump's fan working at max. I rolled back to 3.06 for now. I hope that changing that one cable to CPU_FAN2 does the trick. I got really upset with it honestly. You didnt run into any broblems i guess? And also did you change any settings in the bios? Thank you in advance for any response.

Hello Im going to be building next week with this board. I have 4 x regular sata ssds and 2 pcie 4.0 nv me m.2. SSDs Which M2 slots should I put the m.2 ssds in please Also I have X2 32 gig sticks of ram. I'm presuming they go in ram slots 2 and 4 ?? Many thanks in advance

It's like you always skip the important stuff black screen or edit.

hey man so i have the somone one but idk how to change the ARBG lights, mine only turn red and idk how to change it, any tips?

a 6.75" (oversized 6.5) is a more appropriate size for the door woofer. why not buy a bracket from Metra or similar company instead of hacking the oe speaker?

Bro NEVER BOTTOM FEED THE RAD. That's an easy way to kill the pump quicker. You should know this lol.

I skipped this cooler because of the way you have to install it. Then yesterday I read a comment Arctic made on their video with people complaining, where they said you leave the brackets loose then tighten them after like you did.