วีดีโอ

What is the name of that bracket and how can it be ordered?

Changed 2 thermal fuses and then replaced the heating element. Blew the 3rd fuse… is it the air flow???

Cant hear 🤷‍♂️🤦

If this dryer has a "thermostat" -replace it as there is a good chance it is not working properly resulting is too high temperature which will blow the thermal fuse.

Cant hear you dink.

What if the lent tray is clean but the fuse keeps blowing?

Would be great if I could where what your saying

whaat he saaay?

might be a good video, I dont know because I cant hear you!

This was a huge help. Thanks!

You're talking to low!!!!!

Replace the one is connected at the top of the heating element the one with 2 prones

Can't hear

Cannot hear a word you said

I can’t hear you, even at full volume.

Just to politely let you know without adding exclamation points at the end, it's hard to hear.

when making a video........DON'T COVER THE MIC!!!

Worthless video that's misleading and teaches nothing. Take it down, thanks for wasting my time

Shitty video. Can barely hear the guy.

So what's your point?

So how exactly do you check to see if the heater element is touching the inside? That might be our issue. Our dryer is the exact one you have in this video. Thanks!

audio is soo quiet

Good video. Horrible audio

So. What causes sudsing when using only he detergent?

This video helped me figure out that the sealed system probably had a leak or obstruction and wasn't worth fixing. Your energy company might have a rebate and take your old fridge and PAY YOU $50.

So what is the problem with it? I have the same issue. You are a repair guy so please help us out!

First of why couldn't you edit this so your voice can be heard. But I believe I heard you say this was a GE profile. And the reason your getting this type reaction is due to the control board. This unit has a variable speed D.C. Compressor. And the original control boards on these units had a flaw. If you go to Amazon you can find it and if you read the reviews you'll see where people was able to get a new one from GE for the cost of shipping. But that was a couple of years back. But just google your model number and the control board and you'll find the part number.

but you still get a +1 thumbs up from me.

you should probaly do a voice over, the audio is bad.

You would get more thumbs up if you invested in a microphone. Maybe you might show people how to remove that ductwork on the back of the dryer to do a thorough cleaning since whoever owned that dryer never cleaned the lint trap before. That is a fire hazard begging for a house fire. Please show people how to properly clean the system or at least warn them to get it professionally serviced if you will only give enough info to show them how to throw fuses at the dryer instead of actually troubleshooting and cleaning the ducts.

Hey RICH.....HOW ABOUT MAKING A REAL VIDEO WITH SOUND AND REAL SOLUTIONS!!!

I checked the exhaust which is clean and replaced the fuse. The other components tested good. I blew the 309 degree fuse twice. What now?

I have the same problem. I replaced fuse and left the vent hose unhooked for 1 load. After the 1 load was complete, the fuse was blown.

Replaced dryer vent hose, filter clean but I just blew 2 thermal fuses. Whats next in line to be checked?

So happy this actually worked for me!!! Thank you so much for this video!

I finally found my problem, I had power but after testing it my outlet was only pulling 80 volts, I ran an extension cord to another out let pulling 120 it fixed my problem. This after spending a lot of time and money replacing parts...

I will add this. If you spin the tub by hand it will turn on momentarily, then turn off. I thought this meant I had power., it doesn't. When I check the breaker (two floors away) it was tripped. So BASIC 101 spinning the tub doesn't mean you have power.

So...IF my GFE is tripped....this is helpful....otherwise...NOT.

Worked Wonders!!! .... i was planning on calling the company for help because my washing machine wouldnt turn on. Turned out i only needed to re set and it worked!!!! how simple!

useless Fucking video this Glynis an idioy

Ty ty so much!!!!!!

I rip out all GFCI outlets in my homes and replace with standard outlets... except the bathrooms.

Genius. Wtf does that have to do with the washer???

Nice one! Non-HE soap AND and ripped boot ... all in one machine! lol.