วีดีโอ

Just a tip on a more accurate way to measure toe in/out. Rather than using a tape measure or the rod you used, use an extendible tent pole and measure from the inside of the tyre both front and back rather than trying to judge the center of the tyre. Extend the pole until it touches the rear of the tyres, lock it and pencil mark the pole. Repeat the process on the front then measure between the 2 marks. It's even more accurate again if you can measure from the rims but usually there is vehicle components in the way that makes this impractical. Cheers

As a random.. always enjoy watching your adventures ! 😂

God bless the outback! 😊 Happy Christmas! 🎄

I keep a bottle of loctite 406 i think it is, i dunno have to check the tech specs for which one works best on procelain and glass etc. and it worked really well. Still in there today. i wont replace the windscreen under insurance as the bastards dont offer genuine glass, only chepa shit aftermarket glass.

Your video was truly beautiful and inspiring. As a fellow creator, I appreciate the effort you put into it. Sub and 👍5

Lovely beach and fishies 😊

Love the nugget removal system 😅

First part to wheel aligning a trailer is to triangulate axle to hitch using tape /string line . Then measure toe-in with straight edges on wheel mounting surface on drum/ disc . around .5 --1.5mm per side

I came here to check out the Stockman but was immediately drawn to the music. That bass guitar- wow! upfront and flexing ! Good stuff !

Always things to fix.

Carl from an Engineering viewpoint, the straighened axle is now weeker than the orignal unbent axle. - the internal stress distrubution in the shaft when initially bent made it stronger and less likely to bend again under the same load that originally bent it. - when the shaft was bent back straight, this "strengthning due to bending" was effectivly redone in the opposit direction, ie it is now weeker, less fatigue resistant and more prone to bending in the direction of the inital bending than it was both before and after the initial bend. - I strongly recomend puting the new one in, and keeping the old one as a spare. The other thing that comes to mind is that it looks like the shaft can be bolted on in any rotational direction - you could consider rotating a bent shaft by 90 degrees (yes this will muck up the camber, but that is better than bad toeout) - the other thing that could be considered as a tempory field fix, is using some structural (hardened) washersat the bolt up area to somewhat correct the alignment of a bent assembly I am a little surprised that the shop in Cairns did not consider fiting the shaft into a lathe chuck and then skim the bolt up face to correct the alignemnt. All the best with your travels

Love the looks from Colleen while Carl is explaining the axel set up. She was so interested!

Bananas?! 😮😁 Xx

Nice crossings and waterfall 😊

The cap is filled with Greece. The Greece lubricates your bearings

Nice video. The socket you attached to the Ryobi drill (0700) looks like for the wheel nut, is it strong enough to untighten or tighten the wheel nuts(I mean the skinny part that inserted to the drill). And where you buy the socket? Many thanks.

Nice work with the fix I also carry similar things for fixing wiring and everything else and my partner doesn't understand why. I'd rather have it and not need than need it and not have it

Thread sealent on everything 👍✌️

Nice socket set. You can see the moment Coll got bored of filming it, but I liked it 😂

Get a sharpie and write on your socket set " This Way Up" or put a sticker on the lid. Even a piece of masking tape will suffice.

Also getting under the car with just a bottle jack and no stand is pretty silly. If u don’t have a small stand just chuck your spare tyre u der there as a back up. It’s a long way to hospital if someone happens.

Why aren’t u wearing seatbelts pretty irresponsible. If u roll the car or hit the brakes u will know about it.

I have only owned my 100 for 4 months and 2 months ago I wanted to check the front wheel bearings. The left dust cap had been off before and was stretched from being centre punched to make it stay put. It didn't really work as it was the silicone gasket that held it in place. So I ordered new caps, but in the mean time I thought how can I keep the old one in place to make the car mobile. I noticed he end of the axle was threaded, so I drilled the old cap, cleaned it, applied silicone gasket to the outer lip and to a bolt head and spring washer. Tightened the bolt just enough and drove around like that for 2 weeks waiting for the new caps. I had no problems at all with this. And if I was to be driving on rough roads now I would probably purchase some copper washers and do the same thing again. I can't see any reason for not doing this as a permanent mod.

You might want to delete a video of you both not wearing seatbelts. Or not.

Beautiful camp-site guys. How's the Rover holding up with the dust.? Enjoying the videos ... all best Cate and Mary from the Rover meet up group in Sydney.

Me and wife maybe soon as well heheheh :)

Nice easy fix there. Enjoyed the heavy metal music and Carl flexing his muscles! X

Lovely spot 😊

Have you been in the class 8 medication cabinet!!!

Well done for making it to the tip, shame the dunnies weren't much good, but the plane wrecks were interesting! 😊

I think the craters could be to do with crocodiles?

Healed from Exercise Anaphylaxis, Praise God!

Can't believe that the tip could no longer be free to visit!

Love it!

I wonder if Ruby will know that she got a mention?

Looks like a big day!

😂

Nice new video. Have you 2 been eating mushrooms you shouldn't have? 😃

Blimey thats a long time to drive out there x your right in the outback well done Carl

The corrugations were ending!

My jowls are still bouncing just watching you drive on that road! xx

What a trip. Lots of dips.

Love the different colours of the road.

Fun trip.

Nice yabbies

Nevermind how many curries did you cook. How many gins did you have in between?

Where is the fresh Barra u caught this morning?

How beautiful x

Love x

Best kitty cats, so much fun.