วีดีโอ

By broke... do you mean the owner?

Todo estuvo bien lo único malo es que no lo arrancó y el problema es que aves se prende la luz de el motor no sé si es que se tiene que purgar la línea de gas

Suppose to unbolt high pressure pump side to side a bit at a time also use new bolts on pump. Suppose to replace high pressure steel line

Very helpful and looks easy just stop chewing gum. It sounded horrible!

Did u forget to put the new high pressure fuel pump gasket? I didn’t see u put the new one on…

Don’t chew gum on your video

Thanks for making video. Did you use any RTV sealant on the valve cover gasket? If so, where?

is this the 10" or the 13" inch ??

Is your firts time on this model .... lol

Best video that I’ve seen on this app. Thanks man 👍🏾🙏🏾

Same noise on my 2013 Malibu. I wonder if I can replace the bearings. ?? 🤔

My car battery starts losing voltage as soon as the auto stop gets triggered. I have to shut the car off and turn it back on when that happens, otherwise the battery will die completely. If i restart it, the battery goes back to normal voltage. Does this sound like the alternator or something else?

I have this exact car and am going to attempt this on the upcoming weekend. i didnt skip any portion of your video and i noticed a possible mistake or i didnt see it. I feel like you forgot to put the new high pressure fuel gasket back on. if i missed it or it was in a skipped portion thats my bad lol

I like the video but look like I was looking at a replay over and over again 😂

Is removing this the only way to remove the intake manifold

How did you fix this?

Just did 1 AKL 22 but car is not acting at all. Programmed a VVDI remote I even had 1 original from mk3 brand new in the box, but to my suprise when I opened it, And readed after I was trying to program it so hard but wasn't going through. so the key state was f locked already without me programming it to the vehicle. I have to recheck tomorrow to see why car is not starting.

How much you charge for that job? My car needs it

Please loose the music!

Also folks, if you can use compressed air to remove any traces of hampster bedding/dirt etc in/on and around the valve cover BEFORE you dive in. A clean repair is a happy repair.😀

Cost to fix?

Hi, did you work on Kia Ceed 2019+ bladed key (same look as here on video but not smart key), does the Smart Pro read pin code from Ceed? Thanks

Great video 👍 think I might have to replace my valve cover gasket. Long story / short version needing a reply. Started noticing oil consumption followed by a bluish, white smoke and occasional darker smoke from exhaust while driving or at high acceleration. No visible oil leaks anywhere. Then after some time, I'm driving one day, the car starts to idle rough at a stop light followed by what felt like a fuel blockage with the car struggling to accelerate when hitting the gas followed with shaking of the car. Did some research and immediately changed the spark plugs for the first time since purchasing the car used (2016 Hyundai Sonata 2.4). That cured my sluggish problem and car was back to feeling normal as far as power and acceleration goes but still getting poor gas mileage, noticable oil consumption and smoke from the exhaust. 3 months later I'm having same sluggish issues again from spark plugs going bad. This time changing spark plugs I noticed actual oil residue from the 3rd plug and the other 3 spark plugs looked to be burnt already too. 3rd time changing plugs now and needed answers. Found your video and now think the gasket may be the issue but noticed you mentioned to another comment that it could be valve stem seals in concern with their particular issue. In short from diagnosing from my comment, would you be comfortable with going ahead and doing the valve cover gasket and fuel pressure pump gasket replacement as you did in this video to try and solve my problem, as that is something I can do but I won't be able to do the valve stem cover seal replacement as it looks like a more complex job than just these two gaskets that you are doing in this video. I'd hate to waste the time replacing the valve cover gasket if it is actually a more deeper issue. Thanks in advance if you or anyone else can reply to my question.

Torque specs for the valve cover bolts

This is a great video, I started needing to change the ignition coils and saw the oil on them meant valve cover gasket replacement which led me to this video.....seems easy enough i do have all the tools necessary for the job.

no torque spec or sequence needed?

Thank you! The foil seal on my oil container broke free and went into my valve cover. Your video saved me.

Would you recommend the Smart pro?

Whats the part number? I cant find one for mine

How would I get the oil dried and out of the spark plug holes ?

Thanks. This made life alot easier today.

Great video!!! This was an easy fix because of your help! Subscribing now! Thank you so much😎👍

Which is better matco or snap-on for auto mechanic......

I took this piece off and am now lost on where to put is back. Heeeellpp

Thanks for your help now I can do it myself

I have a knock and ticking sound going on right now it’s gotten louder since I got into an accident

I have a knock and ticking sound going on right now it’s gotten louder since I got into an accident

What is the name of the hose you finally took off at 8:58 mine kinda snapped in the middle of the bolts so I need a new one

Fantastic guide. Kudos to you! I had a misfire around 80,000mile. Replaced plugs. Noticed I had oil in two of the spark plug wells. Not alot of oil but enough to notice. At the time I was unaware of tube seals and that was becoming an issue then. I was always a quart or two low on oil at oil change intervals. Now I have 105,000 miles. Noticed a oil leak on the back side of valve cover. At this point I am adding a quart of oil every 500 miles to keep it topped off. I am almost certain at this point both the valve cover gasket and tube seals are both leaking. I plan to replace the fuel pump gasket, pcv valve, and new plugs just to make it all right. Hopefully this solves my oil consumption issue or at least slows it down. Thanks!

So you don’t show the hard part like removing the lower bolts. Makes people wonder if you did it or had some one else do it for you either way would be a great video if you showed how you got them out exactly like tolls and how you accessed them just a suggestion. I need to do it so I guess I am just being selfish lol sorry it was great video.

75 ft-lbs is pretty good especially since the ANSI standard is only like 35-ish

How do you know when its the Alternator thats bad. My Malibu Eco just lost power and the lights are flickering on the dash.

Just finished up swapping mine with this video 🤘 thank you sir for putting in the time to make this

Thanks for making this video. I have been really wanting to try a long 1/4 ratchet. But wasn't sure how strong they are or how much they flex. That ratchet looks like it would be good to go for just about any 8-14mm fasteners under the hood.

Can you comment where u got the gasket for it? Got a 2.4l gasket from felpro and it was too long

Did u copy somebody else’s video bro lol , if u did pay homeage mother#######

Nice video. Word of advice, be extremely careful with high pressure fuel lines. There have been some major accidents related when relieving the pressure of these lines. I believe they sell bulky gloves that protect your hands. But if you search "oil injection injuries" it'll give you a eye opener on how serious these injuries have become. Yes, it's gasoline, but it is also danagerous, including water at high pressure is extremely dangerous. The body is just not made to get injected at those high pressures. The person it happened to said it felt like a snake bite. And the doctors had to cut open his hand to release the fluid because his hand swelled up so much. Just a looking out.

What’s the make and model of this truck?

Was the car smoking the reason you changed it?

Over twerk them? 🤪