วีดีโอ

Icon is pretty much the dyi Snap-On

I saw a demo on TH-cam where a guy was testing the Overdrive vs MAC vs Snap- On open end wrench trying to loosen a very rounded off nut. The Overdrive was the only one that could get a bite and break it loose. Impressive.

I got that 88 pc set for $50 black friday last year, the chrome finish is lacking on the inside of the sockets, quite disappointed, but I personally really like the ratchets. There is some backdrag but I love the feel of the ratchet, so I don't mind it a whole lot.

Suddenly icon the great has fallen

How to place order?

Same manufacturer

What I can find is always at half price as a sale Lowes or ACE or Ebay. I really like what I have and it has all been Taiwan made except the flush cuts which are France Facom for sure. The heads are thick like Snap-on which is a negative but the flex heads ratchet feel super strong and doesn't bend in use. I would buy them all again.

It’s a bad workmen who blames his tools

Do you need to drill it out for this to work? I have the same kind of bolt that I need to get out of my transfer case but it is about 4 to 5 in clearance from across beam so I will not be able to get a drill up in there

People say the Pittsburgh Pro swiven head ratchet is great. A few less teeth, but good enough. If you need more there are better ones than that Icon. Otherwise Pittsburgh it.

Yo los tengo y los recomiendo 100%

Wow. These extractors never work for me. I was gritting my teeth when you started to turn it out. LOL!! Good job!

Higher tooth counts get me worried about slipping through some teeth with added torque. I could be wrong but starting to feel like fine crafted pocket watches instead of usable tools.

I have always had 1000x better luck with the extractors shaped like square, old timey nails. Proto makes some beauties. Also, get you some real hex keys. Wera Hex plus. The only way to go. A close second is Bondhus, but nothing less.

DAMN, for $100 / KILLED IT!!!

my collection of early 90s Craftsman feels better quality.

This is exactly how I’ve been doing it!!! But first I’ll let them sit in pure 45% vinegar, after that, I let them sit in warm baking soda water. Then I do the exact process you just did.

6:16 why dont you slide it under with the tips closed and open it once youre underneath?

To many skips

What if I ain’t got no mawookee?

You need to use the needle nose style that grabs both edges for that 2 piece style clip, Pittsburg is for going behind door trim and popping Christmas tree style clips, Astro is for single piece clips button clips.

I was trying to decide when and where I would use a spline extractor. And this answered my question. Never needed one. But lots of things use this type of drive these days.

Lol I got the same knipex knockoffs and loved em enough to get a few others. That swivel ratchet looks pretty sweet too !

Proto snapon none of them chrome the inside. That’s a china thing lmao

We begged for affordable USA tools. Now Everyone is crying because the $60 USA MADE sockets aren’t pretty. 😂😂😂😂 maybe we deserve what’s happening to the USA market.

Did he just say a “kkhhh””Nipex???? It’s nipex silent k smh.

You didn’t use the right tool for the job what did you expect?

The Overdrive series combination wrenches are really nice and work great...if you consider their price, you can't go wrong with them.

New sub! Great haul! Good luck hunting!

Well I pulled the trigger and bought a Ryobi PCL250 3/8 reconditioned impact wrench today at my local Direct Tools Factory Outlet. I paid $25.06 including taxes. It comes with a one year warranty. Direct Tools sells mainly Ryobi and Ridgid; new, recons, and blems. I wanted this primarily for lug nuts and it won't come close to being used every day, obviously, so it should last. I had a stroke in 2020 and my left hand is a little weak and gimpy. I was a little skeptical even though I've seen positive reviews and videos here. It's supposed to develop around 220 ft/lbs torque. When I got home I immediately tested the unit on my '06 Silverado. I know the lug nuts are torqued to at least 100 ft/lbs because every time I come back from a tire shop I check them. I already have batteries as I use the Ryobi 18V platform for my yard tools. The little gun zipped the lug nuts right off with no problem. I was pleasantly surprised especially since the store only does exchanges. This will be in my truck or car on trips for sure. I was thinking about buying 2 but they only had one left at my store. Check direct Tools out. They have great deals occasionally.

Now Icon needs the opposite kit set of this one. Such as the high quality and very well made MABLEVI 32 pc. Bolt Extractor set #XS001 and believe Icon will come out with this exact version as it's complete with every size in a nice case. Perfect as a back up whenever you may need it when working on an engine or chassis of an automobile!

Ama.zon sell the exact same thing in different brands same exact quality.... I go the MABLEVI 25 pcs. Screw Extractor set $37 total and it's the same exact design, cut, shape and material as the Icon....

These are all the same Irwin, Mac tools, icon I swear these are all from the same factory I have the Mac tools and Irwin ones man these things suck when they break. Better have that carbide drill bit handy. And they do break I've already snapped 2.

First couple of turns gave me smashed knuckle phantom pains...😂

Quite a few companies under the Stanley umbrella are selling their version of rbrt same teeth and technology just a different look and package

Wheres part 2 i was just about to subscribe aswell disappointing

I have to laugh at all the Snap On fan boys that are so butt hurt about Icon tools. I owned alot of snap on tools that I used everyday for years. No doubt snap on is the best, but Icon tools are pretty good tools for the price point. A fellow mechanic has had Icon tools now for about three years, uses them everyday, wrenches, sockets-chrome and impact, ratchets and pliers. This is all he uses and he is not gentle on his stuff. All his Icon tools have held up, no issues at all. Some guys can't afford Snap On tools nor do they want to go into tool debt. I prefer to buy decent tools at a fraction of the price and spend my hard earned money else where and have a little fun instead of me giving my money to the Snap On guy so he can have fun. Just a thought

I've got a V series ratchet just recently as a replacement for my OLD half inch one and I'm actually surprised how much I don't like it. Feels kind of rough and it takes a lot of force to move. Overdrive ratchets feel better to me, so that will save me some money in the future! I'm going to pick up the Overdrive wrench sets.

now that kit sells for $229.00

I've had a 3/8 Icon ratchet since 2019 and haven't used the warranty yet.

The new Overdrive Series is a good offering for Craftsman in store availability. The Overdrive Series combo wrenches are very nice, especially if you compare it to Stanley Black & Deckers Mac Tools RBRT prices. These Overdrive Series sockets are really too. I paid 102.43 for that 121pc Craftsman Overdrive Series set. I don't need them personally...I have like 20 different sets of various wrenches, I'll give the overdrive series to my son.

Just wondering how long youve been doing mechanics and how come you dont have snap on ?

I know the wrenches are made of a more brittle steel than the original ones.

"They feel the same in your hand". Lol, okay! Thanks for the laugh.

Craftsman is owned by Stanley Black & Decker who also owns MAC tools, so it's not surprising that they have the RBRT features at a lower price.

The ratchets are very bulky, but the handle feels very nice.

I like the pear head ratchets

Wright USA makes great socket sets too. Love their double pawl ratchets.

He's flying that jet by the seat of his pants 1:29