- 21
- 161 000
broujunior
เข้าร่วมเมื่อ 2 พ.ค. 2006
1:14 Tamiya Century 1150 Rotator Heavy Wrecker - Systems Test
Testing out my newly designed controls for my Century Rotator that I'm currently building. It needs way too many channels to make it livable with a regular remote, so I built a "multiplexer" that can control all the features with only one channel on my remote. It's based on an ESP32 microcontroller serving a web interface to control it.
มุมมอง: 920
วีดีโอ
Lexus IS500 with the RC-F axle-back, YES, it's a direct fit!
มุมมอง 10Kปีที่แล้ว
After bunch of research, thanks to ClubLexus, I decided to pull the trigger on the Revel Medallion Touring-S Axle-Back made for the 15-22 RC-F since I was pretty confident it would fit, even though lots said the hangers and piping was different and that it would need to be modified in order to fit. Well, it DOES FIT! It needed zero modifications or whatever, a true simple bolt-on job.
Tamiya 1/14 Heavy Hauler
มุมมอง 48K2 ปีที่แล้ว
Improvised myself as an Heavy Wrecker operator! Custom built Heavy Wrecker based on a Tamiya Grand Hauler.
Tamiya 1:14 Custom built Heavy Wrecker Tests
มุมมอง 9K4 ปีที่แล้ว
Current progress on my custom built Heavy Wrecker based on a Tamiya Grand Hauler 1:14 truck
1/14 (Tamiya) Race Transporter Trailer
มุมมอง 3.6K4 ปีที่แล้ว
Quick demo of the rear lift gate on my 1/14 custom made Race Transporter (based on the FeatherLite trailer). Still needs some adjustment and a better servo, but the principal is there!
18 octobre 2017 - Sortie de route Duplessis Sud, Hauteur Charest
มุมมอง 586 ปีที่แล้ว
18 octobre 2017. Possiblement causé par les capacités affaiblies.
Nouvelle loi pour les motos au Québec!!
มุมมอง 4567 ปีที่แล้ว
Semblerait qu'on ai de nouvelles lois au Québec pour les motos. Dépasser à droite pour sortir d'un stationnement et se faufiler entre les autos à une lumière rouge!
21 juillet 2015 - Route Duplessis à Québec
มุมมอง 5828 ปีที่แล้ว
Pas bright en sens inverse sur Duplessis à Québec.
PS3 FAT with ATX PC power supply
มุมมอง 9K12 ปีที่แล้ว
PS3 FAT 80GB running with an ATX PC power supply, with built-in automatic cabinet cooling.
Tamiya Toyota Tundra double car hauler trailer road test
มุมมอง 1.9K13 ปีที่แล้ว
Testing out my newly built car hauler... with the cat
Tamiya Toyota Tundra - Snow plowing again!
มุมมอง 6K13 ปีที่แล้ว
Tamiya Toyota Tundra - Snow plowing again!
Tamiya Toyota Tundra - Snow Plow
มุมมอง 35K14 ปีที่แล้ว
Tamiya Toyota Tundra with a custom built snow plow
I'm jealous
Nice i wish my is350 24 can fit too 😢
You'll have a hard time getting it to fit in the diffuser holes.
@@_Answer_ oh is350 diffuser holes different is500 right
@@datnguyen5112 yes, the 500 diffuser is made to have stacked tips, not the 350 one
@@_Answer_ oh i see maybe i have to go muffler shop to modified the hanger to fit the diffuser holes
Awesome awesome I love that tow truck wow I'm going to figure out how to build one of them soon or later to go on my video with my other trucks awesome
Hey man, I have a RC F in CA and I have been eyeing this exhaust because its complaint with our lame laws here. Could you post a fly by video at WOT? Theres very little content of this exhaust online
Being winter it's gonna be hard to do unfortunately
@@_Answer_ totally understand, given the large snow bank in the background of this video 😅 thanks for this video anyways!
Hello. Your have built the epic heavy wrecker. You had told me once you 3d printed the light bar. Any chance you would share the file for just the light bar. That would be great. Btw awesome truck 👍👍
Hit me up : androidbrou at gmail dot com
That’s good to know❤
What did you use for actuators to lower the rear gate? And does it raise and lower between upper and lower levels
That's the old version, but it's basically two worm screws driven by a strap under the trailer. It works exactly like the real thing
Did you end up finishing it
Still working on it! Making the body currently, so lots of finishing work will be needed!
What material did you use to build the structure of the trailer?
Mainly aluminum angle bars riveted together
@@_Answer_ Another question what material did you use for the complete trailer box?
@@JoseRodriguez-wx5wr the box is made of plexiglass sheets glued together
Where did you find the light bar? I'd like to purchase one.
Got it on Amazon
Thank you. So much I appreciate it. I'm building the same truck but jet black. It's a beautiful truck!
Ok I'm sorry I meant the bar that the light sits on. The Roll bar?
@@chadswitzer2828 ahhh, my bad! That's custom designed and 3d printed by me.
Oh wow. That's a great job.
Could you make more beds?
that is a great job id like to see more.
Nice! Now i need to copy this in scale 1:4
❤❤❤❤r idj d hff
The tips seem like they could come out a bit
They could, but honestly, I'm happy the way they are, cops don't like exhaust around here, so the more stock looking it is, the better!
@@_Answer_ how the drone at highway and cruising speed , also under load ?
@@mubeenbil almost non existent. Very minor at low speed under moderate load, but can't even notice on the highway
How much diff does it sound compared to stock ?
More throatier, basically the way the car should've sounded from factory
@@_Answer_ hmm okay maybe i’ll get this axle back instead of that titanium 1,800 dollar one lol. Was the installation pretty simple ?
@@grimloxx straight forward! You'll need a 14mm to remove the 4 bolts, and liquid hands soap really helps to get the rubber hangers off and back on!
@@_Answer_ litty ! Well damn thanks alot for this video bro i been looking all over for a different option then the RR racing valvetronic, you did a wonderful deed here sir 💪🏽🙌🏽💯
Does it have any drone?
Nope, it's "bassier" but nothing I'd consider drone (had droning exhaust in the past and hated them, this one is perfect)
'promosm' 🎶
Can you drop the link where you ordered it from? My IS500 will be arriving soon. Also does it void factory warranty?
Got it from my friendly local speed shop. But a bunch a website list it, although stocks might be low as a bunch of 500 owners also got it after I proved it fits.
Whats the height/width/lenght? Im planning on making one of my own :)
47" long, 7.5" wide and 12" high
Awesome Awesome
Awesome awesome
00
How long you been working on this one and and are you selling kits for your century 35 ton man when you get it worked out can't wait
Hum, been working on and off on this one, started probably about 6 months ago. Not selling anything currently, might in the future, but still unsure
Would you build me one
@@paulchandler2180 price would probably be prohibitive since there's so much work involved
Is this something that I can purchase
Not yet as I'm still in the testing phase, but I'll probably make some more once the bugs are ironed out!
Sounds awesome!!
Now do it at 7300 RPM!
You'll be able to try it when you get yours! :P I already sent ya enough beers! haha!
@@_Answer_ Turns out I didn't need any. Tax free and 5% off sealed it! Thanks for figuring this out for us all though!
So if its a direct fit then will the Invidia q300 exhaust fit my is500 as well even though it says it doesnt?
Yes, for the Q300 you will need a bit longer rubber hangers due to how the tips are placed so they are not to close of the diffuser, but other than that, it'll fit.
Only axle back can fit. If you are looking for a full catback from RCF, the mid-pipe does not fit as IS500 is 2 inches longer than the RCF so it requires cutting some part of the mid-pipe.
@@2ZZGE100 Correct, the direct fit is axleback only. But, in the case of the Q300 catback, it can easily be fitted with extensions, a guy on CL installed one.
Can you do some runs please
@@sethirahat planning to once the weather gets nicer
Lindo demais 👏👏👏👏
Looks and functions perfectly
💯💯💯
This has to be the best I've seen up to now it just look right
Thanks!!
Helluva wrecker!!
Beautiful American wrecker tow truck my friend✌👍😎💯
I would like to see a rotate type just like the real thing . Now that is awosome
A rotator is one of my future projects!
Details please!
Well, it's pretty much all custom made, any particular details you want?
Real nice bro.... Hell of a clean up job! Thanks for sharing and hope to see more.
Amazing job! I love all the detail. do the storage compartments open as well?
Nah they don't. Maybe for V2 they will!
so how did you actually built that wrecker. 3d?
Yep, that's mostly 3d printed, with the base truck being a Tamiya Grand Hauler
nice build man good job
Wow video really nice
hello friend, please tell me you can video in detail how and with what details it is very necessary to do
Sehr schön.
i am aiso building one and 3d printing my parts. did you 3d print your parts? are yoy going to share your files on thigiverse ? thank you for your video!
Yep, mostly everything is 3d printed. I might share some later down the road, but not until I'm finished with the build!
Dear Sir, i am looking for the finished 1/14 which has functions like your item. Would you like to sell it ? please email me : anhngo.mr@gmail.com
nice work
Please show a pinout of how you did this i needd to know soooo bad.
Contrairement au reste de la planète, ce n’est pas officiellement légal au Québec. Toronto on un projet pilote pour authoriser les motos à remonter la file. Ainsi le temps de transport est réduit pour tous le monde.
tem como fazer no de 4 pinos
Le monde save pas conduire au Québec c'est effrayant... Moi aussi j'ai commencer a faire des videos avec ma dashcam juste au cas jpognerai un accident par un sans dessin
sens inverse et toi a 115km !!! pas un bon mix
c'était une joke...