วีดีโอ

So cool🎉

brilliant! just tried it and it works. Thank you

Thank you. I like the video format, it made it easy for me to use the black title cards with white text to skip ahead to the section I wanted to see. Everything was quick and to the point but well demonstrated.

I have 2 unused but old 18v batteries. Both were showing as dead. Following this video, I used another 18v battery to reset the B&Ds. So happy that this fix works. A brilliant discovery. Thank you.

Same winding backwards solved problem heard if have this problem probably feeding gear is broken and best is changing head.But this solution worked on my double line head.Thanks again:)

It’s an old charger

what about if its flashing green and red. because mine seems to have the two large green lights and the small red temperature light flashing rapidly

Is the light supposed to turn green?

I opened up my trimmer because it only works in short bursts when pulling the trigger. I thought maybe it was slipping off the red button inside. As it turns out, when I push the red button that is on the circuit board I get the same result: motor spins for about a second, then stops, push button again, with same result(s). What do you think it could be? thanks!

Dude is clueless never touched a drill in his life

What a waste of a time video

What would you use for this? I’d end up blowing my self up some how 😂

HELP! I have the same weed eater. My problem is the string keeps breaking off at the head. I am not stupid. I am using the correct, .065 line. I have tried 2 different lines spools from amazon, one after market, one OEM. I went to Lowes and purchased real B&D line spool. I have checked the feed hole, the little rocker gizmo, new cap, everything is clean. It will work ok when I use it level, but when I tip it up 90* to the ground it breaks the line and I have to take it apart and restring it. I even put the line in water like the web said, maybe the line is dried out, not. WTF!

Ça marche! It works ! Merci ! /Thanks !

280 mOhm 3 battery in series? Do you find new cells in garbage bin? Power tools need hi current 18650 with typical internal resistance 12-15 mOhm. What the point make crappy stuff?

tape method worked great for me

What kind or wire is thst

This video is a dumpster fire on so many levels. Here is your down thumb, you earned it.

Which welder are you using? I bought one off amazon but it just doesnt have enough juice to make a good solid spot weld

The kitchen tongs were a life saver

Revenge

I had the problem with airway blocked error even if everything was cleared. I fixed it by cleaning the inside of the chamber with compressed air. I inserted the compressed air nozzle into each of the gaps one by one until all the dust was blown out: i.imgur.com/SFwbF6w.png. Additionally, I shook the vacuum cleaner with the dust chamber facing down, which helped to remove the remaining dust that had accumulated inside (under the aluminum plate with holes). After turning it on, the "airway is blocked" message still appeared, but switching the speed mode to boost/max and running it a few times eventually cleared/unlocked it. Hopefully, this will help someone as it helped me.

what you are doing here is a temporary fix what you have to do is a lot more involved with mine all the little compartments inside the hoover get blocked up with dust so what they do is clog the filter up quite fast and also can give a blocked error even after you clean the filter and obvious airways, I have to take the hoover completely apart to the bare bones and you will be amazed how much of the hoover ends up with compacted dust inside these little parts , as soon as you clear them it is like a new hoover until they start getting clogged up again but solves the problem for months

Your making m12 users look clueless 😂

That did not work.

I have a 40v battery for a B & D trimmer it will not charge. It doesn't have a lot of useage. When I check the voltge I get 36.2v. When I put it in the charger it blinks green 3 to 5 seconds then flashes red. I tried what you did with a good battery to no avail any suggestions. Thanks

Thanks a lot for this awesome trick! I tried it out, and it worked perfectly for me. My drill and impact driver's battery are charging again because of it. I really appreciate you sharing this-great video!"

Great demonstration and great explanation! Thank you!

Why is there a cut at 3:04?

Mine did not work, perhaps some internal parts are fried.

It ain’t even on the right setting this is stupid

Cuando te das cuenta en manos de un tarado que no sabe lo que tiene en las manos!! Y luego dicen: se quemo y se descompuso

just winding the line in the opposite direction has fixed my problem, thanks!

Which batteries did you use... 18650 but what amperage ?

Once it's manual - how do you get more string to come out?

Sorry. This video is misleading and not very useful.

I thought I'd see fair comparison between those drills but he lost me when he tried both of them drilling in drill mode not in hammer drill mode which not ideal on concrete. 💔

Bro my batteries don’t even leave the charger 😂

I’ve had mine on for like a week 😂

Yes lol its safe

stock footage type ai voice misaligned clipped ahh beat

What did I just watch?

This is just like printers and their cartridges.

I was gonna say, put it in hammer mode for reals. Crap video

Most Common Problems of Black and Decker Drill: toolcroze.com/common-black-and-decker-drill-problems-troubleshooting/

Read more about common Black and Decker trimmer problems: toolcroze.com/common-black-and-decker-trimmer-problems-troubleshooting/ Trimmer motor not working? Read this post: toolcroze.com/black-and-decker-trimmer-motor-problem/

Most common Black and Decker Drill Problems: toolcroze.com/common-black-and-decker-drill-problems-troubleshooting/

Ways to fix Black and Decker Drill Won’t Tighten & Won’t Release Bit issue: toolcroze.com/black-and-decker-drill-wont-tighten-wont-release-bit/

More Solutions for Black and Decker Trimmer Motor Related Problems: toolcroze.com/black-and-decker-trimmer-motor-problem/ Common Black and Decker Trimmer Problems Troubleshooting: toolcroze.com/common-black-and-decker-trimmer-problems-troubleshooting/

Black and Decker Drill Won’t Tighten & Won’t Release Bit? Read this post to troubleshoot: toolcroze.com/black-and-decker-drill-wont-tighten-wont-release-bit/