วีดีโอ

Thank you for this video! Gave me the confidence to do it myself!

Soo , it's a crap shoot even after all the leg work to get the 4 year warranty . Time is money in plowing especially when I can change a battery out in 10 minutes . Probably a better deal for home owners with a long drive ?

The thing you didn't mention is the first thing that you need to know, the max charge rate of the battery. Only after you have that information can you get the right parts to do this with.

I just got a 2006 sportsman Polaris but I don’t know whit oil I need to put and the filter am new on this

Lithium iron phosphate (LFP) is a type of lithium ion, and there are many other types. The other common types are NMC, LMO, LCO, LTO, and NCA. It's not correct to contact LFP vs. lithium ion.

Victron have been making this gear for many,many years. Its all integrated into Multiplus units.......and Quattro's etc in one unit, that talks to all the systems, has soft start loading on generators etc, remote monitoring over internet etc. Fully programmable, remote management, ESS, and every other possible configuration options imaginable.

Why do I see smoke in the video? Is there a wood stove in that garage not venting properly? Or is it just the camera?

Thanks that was very helpful 👍 😊

Greetings! I have a tecumseh 13hp oh358sa engine, there is a problem in operation, there are pops in the muffler, where do you think I need to dig? I washed the carburetor, it is not adjustable, I checked both valves according to 0004, I didn’t check the ignition coil, more precisely the gap, the spark plug is normal, whether it’s rich or poor, I don’t know

where is the edited video of this rebuild?

Can I send you my motor?

You always buy an inch larger capacity chipper than you need, at least. You try to get Vermeer service out of a Troy Bilt and you're going to have issues. This thing, although advertised for 3" branches, was never meant to do any more than brush and broomstick sized limbs.

You'll have a lot better time trimming those branches down with a little battery powered chainsaw.

hello Regarding the camera, I want to ask how it can work if I set it up in the forest and there is no Wi-Fi connection there? Does it only work on Wi-Fi?

Thanks man, videos like this make it that we never are really working on anything alone.

DC House 48V 50ah rack batteries On eBay are around .14/wh. For 20Kwh would be around $3K with free shipping and tax. I believe these are manufactured by Eco-Worthy and rebranded.

Thanks for your videos. Glad to see you having a positive experience with it! I just ordered this unit today in the 5000w version, along with 5 of the 48V 50ah Lifepo4 batteries to go with it. Looking forward to scrapping my 48v 220ah lead acid bank. I was wondering if you are able to turn the inverter function off and still operate the charger? Looks to be only one physical on-off switch. Assuming that kills the unit entirely, or just the inverter out? I'd love to be able to turn the inverter off when not in use, and convert a lot of my cabin to low voltage DC for everything. One thing I never realized when I built my setup was how much waste there is from the big inverter running with minimal to no load.

I have the same machine! My regulator only has 1 plug and 5 ports but i will adapt and overcome! Mine dosent have a ground on it either haha! Good video!

I keep hearing they won't honor their warranty

Precios

Do you by change have the link to the part number I can't seem to find the right onw

I installed the piston rings today, and I’m not sure if I’m crazy but I thought you said to overlap the oil ring by one. It was impossible to overlap it. I checked the original piston and they just mate up to each other with no overlap, the ring on top and bottom push the ridges on the oil ring in and keep it in place. Just in case anyone else is watching, hope to save you 30 minutes trying to gently fit the oil ring and overlap it by one.

Thank you so much for sharing this. Rebuilding the exact same engine for a 4x2 Gator. Couldn’t find anyone else as detailed as you with everything in view.

Hunting in the background?

Hello there, so what do you have seting 01 set on when charging the batteries with the generator?

Do you think beating the **** outta it is good for the differential???

Mine leaks real bad

I just commented, but I didn’t get the part right - it’s not the idle screw, it is the plastic under it with brass tubes and o-ring on it - 12:40 time. You never show the hole or wire to clean the hole. So I can’t find any hole except toward the bottom. Can you help - clarify?

Re: plastic Idle screw you pulled our….is there a hole from top to bottom on that or just the sideways hole (perpendicular)? I looked at the holes with the brass tube bot top and bottom and they dont seem to go all the way through.

I saw the multiboard guys video. he does it by putting a PETG layer between the PLA 8x8 prints. means you need one of those fancy bamboolab multi filament printers. I am trying to see if i can do this on my ender 3. please share your tips on how to achieve this stack on a ender3 like printer and what settings would help with separating the prints

I really needed to see you assemble the shaft together. For some reason the pin on the right won’t go into the hole .

Hey bro! Doing this but on the back. Is there inspection plate underneath ?

Mine only runs with the gas cap off? Should I start with water hose on?

Question mine only runs with the gas cap off and I can’t figure out why?

China riders wich one it's a few

Nice! I have a large powerwall built with 18650 using Batrium as the BMS. Agree 100% its for someone with time vs money (in my case I'm retired and did it as a hobby) but I'm in year 7 and the oldest packs just went over 2,000 cycles and working great. The key for long life in my experience is lower stress on the cells by doing a larger battery so you can operate in the middle range and avoid the extreme min (3.0v * 14 = 42v) and max (4.2v * 14 = 58.8v). I do 3.54v/pack * 14 = 49.5v min to 4.0v/pack * 14 = 56v max with an overall average 37% DoD. And if you can, do moderate ambient temps. And great to hear @AveRage_Joe help you - his work with 18650 helped me several years ago - he's one of those 'real info' channels.

can you manually configure min/max/float voltage for the battery?

I've got an RZ-C 54. Hit a bump and it stopped. Got error code 23, but the battery leads are attached securely.

I'm going to be buying a 3in chipper and it seems most of these small, sub $1k, units are hit or miss on quality. I feel like these single chute designs are easier to feed but the vibration breaks the chute weld at the base because the chute sticks out so far. The ones with the top hopper have a separate branch feeder but it is linear and requires more prep to feed branches.

I have the same inverter (well almost....5000W instead of 3500 but the software on the unit is the same) with 6x265w panels and 4 LiFePo4 batteries (100Ah) in series (48v nominal). First off I want to say thanks for the video. Their support is absolutely terrible and haven't heard anything from them since I emailed over 2 weeks ago. I'm using it for full off-grid and relying strictly on the panels to charge the batteries. I'm having some issues which I can't seem to resolve and hoping you or a viewer can help out. I have it set for Solar priority and SOL as the only power source. The only loads running are Starlink and my WiFi router as well as a cell booster. Active load is anywhere from 50-60 watts and seems to average around 55. That's not including the load from the Eco-Worthy itself. What is currently happening is that it will charge the batteries to 100% and then will let the batteries provide some of the power output so that by the time the Sun goes down my batteries are at 40 SOC, which is worrisome if the following day is overcast and the batteries can't charge fully. Is there anyway to set this thing so that it uses the PV's during the day to cover the load as well as keep the batteries charged so that they can cover the load when there is no solar power generated? Also any idea what the load for the inverter is? I can't seem to find those numbers anywhere. It's not uncommon to see 275 watts being generated and seeing the batteries continue to power the load along with the PVs. Finally....any way to update the firmware on the unit. I have 3 days left on my return window to Amazon so if I can't get it sorted I may have to return it. Thanks.

I have the same inverter (well almost....5000W instead of 3500 but the software on the unit is the same) with 6x265w panels and 4 LiFePo4 batteries (100Ah) in series (48v nominal). First off I want to say thanks for the video. Their support is absolutely terrible and haven't heard anything from them since I emailed over 2 weeks ago. I'm using it for full off-grid and relying strictly on the panels to charge the batteries. I'm having some issues which I can't seem to resolve and hoping you or a viewer can help out. I have it set for Solar priority and SOL as the only power source. The only loads running are Starlink and my WiFi router as well as a cell booster. Active load is anywhere from 50-60 watts and seems to average around 55. That's not including the load from the Eco-Worthy itself. What is currently happening is that it will charge the batteries to 100% and then will let the batteries provide some of the power output so that by the time the Sun goes down my batteries are at 40 SOC, which is worrisome if the following day is overcast and the batteries can't charge fully. Is there anyway to set this thing so that it uses the PV's during the day to cover the load as well as keep the batteries charged so that they can cover the load when there is no solar power generated? Also any idea what the load for the inverter is? I can't seem to find those numbers anywhere. It's not uncommon to see 275 watts being generated and seeing the batteries continue to power the load along with the PVs. Finally....any way to update the firmware on the unit. I have 3 days left on my return window to Amazon so if I can't get it sorted I may have to return it. Thanks.

Is this light Dust&Dawn really sensitive? I just installed mine but it is not coming on when I put a blanket over to test it?

Thanks for putting this up, showed me everything I needed to know. Did you gap the rings? I wouldn't worry about editing the video, it's easy enough to fast forward.

I'm considering buying one of these I saw for sale today. I don't know what year or anything else about it--just the model number. I'm wondering if there are any specific concerns anyone has about this model, such as the spindles being poorly made, or the transmission prone to failure. I appreciate any helpful comments.

Good way to ruin a feeler guage.

Good video but crimping was down upside down

Great video. Thank you.. Its been two years now.. still running smooth? Any luck with customer service? Im about to purchase a ECO-WORTHY 9.4KWH 2340W 48V Solar Power Complete System off amazon and ship to the Caribbean, but stressing about customer service. Thoughts?

Cheap (but expensive) Chinesium chipper......thanks for the heads up

Question: Does this unit do anything to cool regular water? Because it feels really cool just with tap water, I haven't frozen the ice packs yet. LOVING THIS! I bought it for the garage to play ping pong (super hot here) but am realizing it's so quiet, it will work great in my guest room. My house AC is STRONG in the master bedroom while my guest bedroom has only ONE vent...grrrr, what was my designer thinking? Everyone wants their guests comfortable!

I just plugged my new one in and I LOVE it! But I didn't even know where the "ice compartment" was from the manual, so your video helped me IMMENSELY, thank you so much! (don't you HATE when you ruin something when you guess about such things?)