วีดีโอ

I dont remember, sry..

@@lukepedler8564 In terms of power i have no doubt. Just keep in mind potential CG issues, as it is designed for twin engines.

@@3Dbeerlovers yes that's accounted for by changing the rudder servo location from the tail to the cockpit.

Thats a nice setup. About canister - a good, quality cans give the same power as stock. Cheap ones seem to absorb some.

So the website is krumscheid-metallwaren.de, you can check for tunned pipe 1030. You can find full kit under the tab komplettesysteme. With the properly set there should be smooth transition and faster response.

@@3Dbeerlovers what was the final headers length in yours ? Have you shortened it ?

@@3dholicpilot522 i dont even know how to measure the curve.. Also i wouldnt rely on such numbers at all. The approximate lenght is what you get, for fine tunning you should try and see how it works best for you.

krumscheid-metallwaren.de

Of course, smaller displacement = more power 😂

@@3Dbeerlovers what you smile? You put 23x8 and 7500 on 55cc, and some prop in dle 65 7300.....

Either it makes perfect sense, or you cant read the numbers. Which is it?

Yea, its not top of the quality but it flies well..

Thanks for pointing out the poor landing gear, it's the one thing you don't need to stress about. Stopped me buying one for sure

@@patrickhoyle8357 I have an extreme flight 260 and it's much stronger

Camera man has seen worse 😆

It was 8.9kg with Re2. This stock setup shuld be ~200g lighter.

Haha but truly as long as the props in one piece you can fly this sh*t 😁

@@3Dbeerlovers exactly!!!!

880. But the battery makes it rocket.

Idk, there was no capacity number on it 😬 Should be 4000-5000mah

@@3Dbeerlovers Thanks.

Nah, that was a long time, two weeks after maiden 😁

I can see the covering repairs and new wheel pants.

I know, there are photos on community tab as well.

@@3Dbeerlovers hard landing?

Torque roll wrong rudder correction

Send it!

@@3Dbeerlovers haha, which one do you like better? 85 or 91?

Klemen (the owner) said both have pretty similar characteristics but 91 is better. I flew his 85 once and it was awsome, you couldnt go wrong with either.

yes 😁 some like to do 7 flights before recharging.

ahhh ok infact ahahah I use 2x 2200@@3Dbeerlovers

That seems like the opposite extreme or competition setup 😅 How many flights do you get?

I have frsky telemetry and I use savox 2290, every flight around 5/600 mah every flight@@3Dbeerlovers

@@simoneguanziroli3310 I thought it would be more. Thanks for that info!

Hello, Skywing Edge is more predictable at low&slow, very locked in and it feels very light, EF Edge on the other hand is heavier and does some tumbling maneuvres better. Both have great tail authority. It also seems that EF starts falling apart sooner but SW Edge has a slight CG issue (if you run gas).

Thats hard to believe. We measured 7300rpm with falcon 24x9 and it wasnt even broken in.

Not thrue ! Falcon 24x9 6800rpm on the ground. ​@@3Dbeerlovers

Yes thrue ! Check forums and other videos. Or come visit us & see for yourself.

@@3Dbeerlovers another video you use fiala 23x8 not 24x10 !

With dle55, yes.

None of us have any experience with 55RA, sorry.

😂😂

In this video it was Joker (some Lindinger brand) but later it was replaced with Dualsky GA2500.

It is. There is 160g of weight on the tail to get the right CG.

That was 91", this one is 85". Two airframes, same color scheme.

@@3Dbeerlovers a ok, sorry

yes with Krumscheid pipe

Stock. The pipe is quiet and gives +200rpm but there was some weird behavior in low and middle range so it was changed back to stock.

Awesome How's your CG on this one?

​@@Wilmer787 much better than 85". But then again, its designed for twin engine and heres with single.

How do you like the dle65? I'm considering one for my flex cap232ex. Hows the vibration level?

Surprisingly low. Its not as smooth as twins but less vibrations than GP61 for sure.

Yes, Fiala has only wooden props, but performance is amazing. Tiny bit more rpm than Falcon CF of the same size and performs really close

​@@3Dbeerlovers23x8 ?

24x10, 7350rpm. But its brand new engine, still breaking in.

@@3Dbeerlovers amazing!

thanks!

Hvala, bom popravil 👍