วีดีโอ

A pizza stone in the bottom of the oven helps for more even temp.

Soak in white vinegar and water to remove rust.

I had the same problem on my 05 F150 5.4. I followed your directions. Your tip to make sure the belt was inside the tensioner pulley was spot on! I removed my old tensioner, made the grinding, squeaky noise and I new that was the problem! I started it and the noise was gone!!! Thanks for your video!

i have a nighthawk with 20 and 40 lbs limbs great bow but the cost of a quiver was less then 50 cnd for me and its and SAS model with quick relase so where your getting your prices from no idea, now i will point this out what your going to hunt with for arrows and weights you must do the same with pratice setup as well otherwise best of luck getting your proper shot placement in, also only shoot arrows with feathers plastic vanes get kicked all the time and so far i have not found a rest that will function properly with plastic vanes on the nighhawk or even my aspen recuves yes

I’m not a hunter (I’m a huge gun guy though, just not interested in hunting, but I appreciate the importance of lawful hunting) but I just want to be able to walk around the dirt roads and such, like maybe the ones off Shady Grove-Maytown Rd. I’ve spent most my life in St Clair county, but I’m originally from Edgewater, and my aunt and uncle and cousin all live out in Adamsville, so it’s an area I’m pretty familiar with.

We really didn't need to watch you shell each individual acorn now did we.

The only difference between cast iron these days is the manufacturers don’t bother to smooth it down anymore like the past

I agree with the stripping of the factory (seasoning) and starting from scratch. Play it safe cuz the Prosses is simple and we don't know what was used in the manufacturing of it.

Thank you for sharing your journey. I’ve had migraines for several years and chronic sinusitis also. I take Sumitriptan for migraines which doesn’t help very much but sometimes it does. I have been to an ENT and they did a CT scan and they want to do this surgery on me. I keep putting it off because I’m afraid of being down to long etc. Are you still glad you had sugary and did it take your migraines away. The pain I’ve endured with my migraines is excruciating and I have ti just take medicine and just try to go to sleep for sometimes two days in a row and sometimes I have to end up going to hospital for the migraines to go away.

Very smart. Survival buckets. In time of weather disaster you wish there are couple of these around.

I grow my own. Would never pay $60 for a gourd. People will throw $ at anything 🙄

I have these on my Ranger. The truck came with Hankook Dynapro ATM, which wore out in 25k miles. I then had Falken wildpeak at3w that lasted about 50k miles. The wildpeak's were good but very loud. The TralBlades seem very comparable to the Dynapro ATM that the truck came with but $100 less. All is great so fair. I just hope they last.

This got me thinkin. Couple year back i picked up a rusty picaxe from cashies, i cut the spike off and made a welding hammer with it. Now i know what to use the 'shovel' end for. Angle grinder and a $10 handle from bunnings and ill be sweet 🤙🏽

Glad you stuck by her! That type of bike is now called a "step through" for us seniors to be able to ride. lol

All other demonstrations of this style suggest sharpening in one direction NOT both.

that was pretty cool, thanks for posting. I've got a couple of those old drills that they stopped making the battery for. I gotta give this a try.

Hill-billy techniques get hill-billy results…. SMH.

Your kinda dangerous with a chainsaw.....

The black line is not the return line as it is heavier duty! Also there is no reason to put the extra filter on the return line inside the tank. Otherwise great video man

A broom stick works really well also

What an awesome idea. Thank you

Muy interesante gracias por compartir saludos

Operating a chainsaw in shorts? Not a good idea.

Just purchased a 68 fastwin . Do you have a part number for the correct carb ? I believe the one that came with it may be the wrong one.

Just purchased a 68 fastwin . Do you have a part number for the correct carb ? I believe the one that came with it may be the wrong one.

I got an ozark trail small skillet for $1 on clearance at Walmart. I spent about an hour sanding and polishing it, then seasoned it 5 times. And it’s the ultimate little egg cooker. It’s completely non stick. Works just as good as my smiths or old griswalds. Although it is thinner. After polishing and properly seasoning it it works great. It’s the small idk 6 or 8 inch one. If fits two eggs to fry them perfectly. You a get a whole set for camping or sometbing super cheap, just need to sand and polish them. It’s Impressive to me how insanely rough those cheap skillets are from the factory. Idk how you could cook on them without some resurfacing.

I like it! Looks rugged 😊❤. Good job. I’m making I mini one for my olive oil to put with my spice kit. Ran out of the thicker leather so I used (experiment) with high end leather furniture samples. It’s still drying right now so it’ll be a couple of days before I know if it works. Fingers crossed

Hello. I just wanted to say thank you. I just built a pickaroon using your idea of the saw blade as the pick material. It works very well and I think will be quite durable. Great idea. Ben

I started bowhunting 54 years ago. Most of the archers at the range were shooting sites then. This is not a compound thing nor is it new.

Great video. A good source for all seasons.

what octane gas did you put in it ?

That stove was never designed to run on propane. Its a Coleman liquid has stove.

Do you still have those tires and how long has those tires last you

Where did you get the knife sharpener?

just got these for $38 a tire on SimpleTire! Insane deal!

I'm going to do the same thing do I have to get some fresh gas for it or no

That polymerized something is called seasoning. Polymerization is the chemical process that happens if you season a skillet correctly. The oil turns into a polymer and bonds to the skillet. It's no longer oil. That's also why you can use modern dish soap like Dawn. It removes oil but not seasoning (like great grandma's lye based soap did).

I bought 4 dried gourds cause it wanted them now. It cost $50. Now I got 4 and a ton of seeds

I have a 15" ozark skillet that was just horrible so i never bothered seasoning it. Well today i cleaned it till it turned out a silver color then heated it and it soaked up 10 coats of oil. Then i put it in the oven for an hour on 500° let it cool put more oil on and back in the oven for another hour and repeated 2 more times, now it looks better than my high dollar cast iron skillets. Fixing to cook some meat in it and see how it does.

Nice 👍...

Dude great video from a Texan Living in Arkansas!

Upside down fire has got to be about three times larger than what you are trying to demonstrate. You're trying to use match sticks to demonstrate. Doesn't work that way.

Ehat the hell did you do to that rifle

you did all that great work you should have painted in case,

Thank you for all the info. I was curious about their safety for storing food as well. Really informative and great video! Great reminder for our upcoming winter prep as well! Thani you!

Love it! Have same tractor. I can’t believe the aftermarket didn’t offer something like this that took that sloped back surface into consideration. Very nice 👍🏼 job!!!

I have this exact stove, same month and year. Thanks for posting this.

I am impressed that the oven works as well as it does with all the air gaps.Few and very far between where I live to get the oven . New is about 90+ Canadian . So when the time comes that I think I will need one , I will build my own using the Coleman oven as the design. I will have to source 1/16" aluminum sheet !

I love cheap cast iron because I can turn a $15 pan into a $200 pan with minimal effort.

Brother I got kicked out my hunting spot. I’m gonna try mulberry any suggestions where to start north south in middle